What steps will reproduce the problem? 1. 2. 3.

What is the expected output? What do you see instead?

What version of the product are you using? On what operating system?

Please attach a package log, as described here: http://btstack.uservoice.com/knowledgebase/articles/69548-how-to-get- btstack-communication-log

and provide any additional information below.

BTstack - the Bluetooth Stack - works on 32bit iOS 7.0.4 devices. It's not clear why it doesn't work on newer devices like iPhone 5S, iPad mini retina or iPad Air.

Does not work on iPad Air on iOS 7. I am unable to provide a package log; btstack is not listed in the settings app. I'm happy to do some tests if you like me to.

Hello, in 64bit (5s) it does not work :(

Comment deleted

I can't enable BTStack log.( IOS 7.0.4 , Ipad mini with retina display) In setting-->BtStack show me this "There was an error loading the preference bundle for BTstack" ( settting ->prefernce show both of them BTstak or BTstack GPS, "can change limit update rate")

In my iphone 4 ( IOS 7.0.4 , settting ->prefernce does not show , both of them BTstak or BTstack GPS)

all of this use Cydia Substrate 0.9.5000

Eagerly awaiting for fix...

My iDevices With BTStack Issue : Iphone 5S & iPad Air ( IOS 7.0.4 )

Does not work on iPad Air on iOS 7.0.3. BTstack shows up in the settings view as an app but displays "There was an error loading the preference bundle for BTstack"

when using Blutrol to look for Ps3 controller it returns "Bluetooth not available" consensus is this is due to BTstack error

any progress on this issue would be greatly appreciated :) thanks in advance

Hi Guys. Any update or fix for our problem for ipad air 7.0.4? I need to get my gps back online for my flights

Cheers

No update yet. I'm also pretty much busy during January. I plan to work on BTstack and my other projects end of January.

If someone figures out why BTstack gets stuck on arm64 devices and provides a fix, I'm happy to release an update earlier.

Most of my extensions wouldn't work even with a fixed BTstack (e.g. Blutrol and BTC Mouse cannot simulate touches, GPS and WeBe++ have a broken pairing dialog, etc..)

Matthias,

I have installed the btstack version from Cydia and replaced all armv7 binaries with arm64 ones (built from latest SVN source). Now the preference screen in the settings app works but btstack still won't work. I see there is some magic going on with the PatchBlueTool binary, but on my device it reports 0 changes (which probably isn't a good sign). Good news is logging seems to work and I managed to get some info in the hci_dump file (attached to this post). Starting and stopping the BTdaemon binary from the command line gives me the following output:

BTdaemon started

read prefs for 0 devices

config.h: HAVE_RFCOMM

L2CAP_REGISTER_SERVICE psm 0x1 mtu 65535 L2CAP_EVENT_SERVICE_REGISTERED status 0x0 psm 0x1 launch_msg("CheckIn") IPC failure: 1 ^C <= SIGINT received, shutting down..

hci_power_control: 0, current mode 0

BTSTACK_EVENT_STATE 0 New state: 0

2014-01-04 02:13:07.242 BTdaemon[462:507] Bluetooth status: OFF hci_power_control: 0, current mode 0

BTSTACK_EVENT_STATE 0 New state: 0

2014-01-04 02:13:07.249 BTdaemon[462:507] Bluetooth status: OFF Good bye, see you.

I feel I'm kind of on the right track here, but currently I don't know how to proceed to fix this. I'd be happy to spend some more time to get this working if you could maybe give me a few tips on how to proceed.

pimd...

I'm currently trying to figure it out as well, but you seem to have gotten further than I have.

Maybe if you could post more details of what you've done, me and others could try out different approaches that could eventually lead us in the right direction to fixing this.

Thank you for the information so far, let's hope we can figure this out in a group effort.

Cheers!

Issue 362 has been merged into this issue.

HI there.

I've had a few hours to look into this. First, I tried using Ryan Petrichs's theos fork that includes his new "lipoplastic" feature to build fat binaries. After that, and Preferences loading again, I looked into the issue with Bluetooth module initialization. It turns out that Apple changed their "magic" options values to configure the baud rate and such. I've committed a fix and BTstack happily starts up again.

Here's a beta of it: https://dl.dropboxusercontent.com/u/5138628/ch.ringwald.btstack_0.8-1_iphoneos-arm.deb

I still have to compile SpringBoardAccess for 64 bit, but that's a different issue and not severe.

Is there a repo available for installing this beat version? Thanks!

Great stuff matthias.

Thank you for the fast fix! I'll look forward to testing it out!

Cheers!

Thanks! The beta seems to work fine on first glance. Will test some more and report any problems I find.

Hi, I've tested your package on air ipad 7.0.4 ... it's beautiful! BTstack can again start the bluetooth module and it works flawless.

a big thank you

I cannot activate on ipad mini 2 wifi.

When using emulators trying to connect the wiimote I get stuck on activating btstack and it never connects the wiimote. I then have to go into settings turn btstack to the "None" option then switch back to the "btstack" option then go into the emulator and it works again. I attached the dump file. I hope I did it right. Otherwise it works great. Thanks.

@tiagosseix.... is ipad mini 2 wifi the retina one? if yes, I have the same one and it works fine. What did you use to test with? please try e.g. BTstack Mouse and/or try this SpringBoardAccess package: https://dl.dropboxusercontent.com/u/5138628/ch.ringwald.springboardaccess_0.3-5_iphoneos-arm.deb

@turntablez123: well, you get a hci_dump.pklg, which means BTstack is working. In the log, there's a connection to a wii mote establish and many reports are received. so, it's not an iOS 7 + ARM 64 problem :)

Thank you for your answer. I tried keyboard, gps and mouse. Mouse works great after installing btstack beta, but neither keyboard or gps work. Installed springboard as refered. No difference. Still asking to buy at cydia. Used to work great with iPad 1 iOS 5.

I'm trying to play dungeon hunter 4 and it says I have everything connected but when i go to the game it doesn't work.. Am I doing something wrong?

I'm running on 7.0.4 on the 5s

@tiagoseixas... well, then everything is fine. None of the actual tweaks work on iOS 7 for various reasons. I'll look after that when I get around. the issue here was the BTstack Bluetooth Stack which didn't work on iOS 7 at all.

Tested on iPad 2 Wi-Fi REV B, iOS 7.0.4. Works fine in GBA.emu. Theres a way to use this on games like GTA San Andreas and with Controller Pro?

@MRringwald

Hello mate,

For the comfort and make the beta tester I try mighty mouse on the beta version of BTstack provided above, ON ipad air x64.

ipad air Evasione 704 - BTstack beta (wiimote is ok since, great job ^ ^) mac mouse connects well, witness twinning: ok -> No point appears, nowhere ... Never mind, I do a test cross with iphone must hang there.

iphone 4 704 gsm Evasione - BTstack found on cydia (no access problem in bluetooth module): mac mouse connects well, witness twinning: ok -> Pointer appeared black in the top left, 5 seconds, no more apple and rebooted .. ok I push the boot but again connected, the mouse pointer does not create but the phone does not restarts this time ...

Hmmmm interesting, it does not come from the architecture 64, I think ... An idea my friends?

thank you cordially

guys, I've fixed BTstack itself, but not the packages that use it.

I've written a longer summary here: https://btstack.uservoice.com/knowledgebase/articles/300991-ios-7-compatibility

matthias.ringwald@gmail.com Can you pleas add Norwegian support to WeBe++ ÆØÅ æøå

Hi Matthias, thanks a lot for the fix of BTstack for 64bit. Made my wife a happy Super Mario player on her iPad mini ;-) Works really nice!

Ipod touch 5, iOS 7.0.4 BTStack GPS works fine in test mode, but don't accept my license. Package listed as purchased in my Cydia account.

Hi Thanks for that project. I'm a bit confused, so if you could advise: I have iphone 5s and ipad mini retina wifi only Will I be able to use btstack for using my iphone gps on my ipad? Thanks in advance, Jonathan

Mathias must have the patience of a Saint.

Folks, he's said this several times already.

GPS/MOUSE/KEYBOARD DO NOT WORK AT THIS TIME IN BTSTACK. THEY WILL BE UPDATED LATER.

Chris, I know that, but i saw some folks saying that GPS does work for them, this is why i am asking. maybe in the official version it doesnt work but on the beta one?

It says fixed... btstack connects with my iphone but it doesn't allow me to do anything...

Comment deleted

@yonitanp: BTstack GPS for example consists of these parts: BTstack itself, the app that talks to the GPS, the code that checks the license, the code that makes the app run in the background indefinitely, and the code that injects GPS data into running apps. As far as I know, with the update BTstack, you can connect to a GPS and get it's data, but 1-3 of the other parts don't work yet.

BTstack Mouse & BTstack Keyboard won't be updated, but they didn't work on iOS 6 either - and there's no need for them with BTC Mouse & Trackpad, which doesn't use BTstack anymore.

Blutrol and WeBe++ will be updated, too. Celeste 2... most likely, too.

hey matthias,

i have an iphone 5s

my problem is that when i go into settings btstack gives me the message; "there was an error loading the preference bundle for BTstack"

do i have to download the beta from above or is there a problem with my cydia not showing me an update

keep up the great work!

Hi

I've tried to install the beta but I get dependency errors. First for ldid which I found in a package but after that it says depends on cc.ringwald.Springboardaccess >=2.x but I have 3.x installed... So it should be ok? Can anyone help?

John

You can see the app here ;) Cydia roqyBT7 this is the same app that BTstack GPS iOS7!!! :D

Ok so Cydia has brought up an update to springboard access which has updated preferenceloader which has sorted my dependency issue.

I've set my Mac using six axis... When I try to connect to my device I can see the Bluetooth icon flickering as if trying to connect but it fails.... Anyone seen this?

Same issue here as with #29, purchased OK but stays in Demo mode. Any idea?

Pierre

Comment deleted

@wallace4 #39 I created a new Gmail account just to solve your problem because I was experiencing the same so a thank you would be nice. Anyway, when that Bluetooth icon is flickering, it gets dark and light intermittently, you just have to open the game during that time and it will ask you to press the PS button on your controller. I've solved it to that point, the PS is connected but I can't move my character in Infinity Blade III. So further help needed!

A problem with interconnection of iPad Air IOS 7.0.4 JB and a BT-mouse.

I try to attach a Bluetooth mouse to my iPad. The tablet reports mouse is successfully connected, but no mouse pointer appears on the screen after that. Could anybody help me with this issue, please?

I have the same issue as #43 sigurno. I downloaded and installed BTStack via Cydia iPad Air. It scanned and installed my Magic Mouse. No mouse is displayed at all.

44 BBRecord, You also have a connection, but there is no mouse cursor? I also have a magic mouse and other I did not try. Please, if you will set up, let me know, I really need to work.

yes sigurno...same issue. connection with no mouse cursor. still trying to find a solution. will keep you posted. please do the same..

sigurno.ru, BBRecorsinc, ismaellt.90: don't know where you're looking, just read post #35 here and #26, too.

Project Member #47 , I can hardly speak English, tell me, please, is it possible to connect a magic mouse to the tablet, how, step by step? thanks

sigurno.no: on iOS 3 it is possible using BTstack Mouse, on iOS 4,5,6 it is possible with BTstack Mouse and/or BTC Mouse & Trackpad. on iOS 7 it is not at the moment, you have to wait for an update of BTC Mouse & Trackpad.

Project Member #49, Thanks for the clarification, it is now clear. A Which roughly deadline to understand whether to build a backup plan?

sigurno.ro: well, it's done when it's one. I expect that to be beginning of February. What kind of backup plan are you looking for?

Comment deleted

Comment deleted

Same issue here as with #29, #40 purchased OK but stays in Demo mode

I wanted to see if you could help me. You done an amazing job with the older BTStack and Im so hooked on the emulators with the wimote. I just got an IpadAir which is awesome but the BTStack doesn't seem to be picking up the WiMote. I tried everything. Installing your 0.8.1, uninstalling and going to 0.8.2, uninstalling and rebooting. trying the same cycles and rebooting each time. One I was in I put it in BTStack Mode, looks like it was working but when i got to connect using the NES, NEO, SNES apps the Wiimote never picks up..

I added screenshots of the BTstack in settings, the NES, SNES and NEO GEO emulator. Your source file and the HCI_Dump file....

Any help would be SUPER awesome and I would be super stoked and would be amazing...

Maybe I'm doing it wrong or set it up wrong... can you help...

Im also @cryco02 on twitter.. and thanks for being an awesome programmers for the community.. :D

Hi Matthias,

I got your email a couple months back saying that you would probably update mouse and trackpad in February, just wanted to see how it's coming. I can't wait! Do you think the update for ios7 will be before the 15th? By the way, I'm s Using the ipad air, ios7.0.4. Thanks for all your work!

I'd like to add my support for the request to BTC Mouse & Trackpad for iOS 7. As a developer I was pressed to update but more than anything from iOS 6 I miss this the most. Combining it with DisplayOut enables the fantastic terminal-like capability of smartphones and tablets, like what Canonical's Mark Shuttleworth wants to do with Ubuntu.

I can see that the Cydia scene needs to be reinvigorated and I want to help. With BTC, I can make guides on how to set up the terminal system, and use editors like Textastic for rapid on-device development. I'd like to pick up where the TheosTutorials leaves off, but also show how to code in C, C++, Python, etc., all on the device, with no real compromises.

I just wanted you to know how much of a difference your fantastic tweak actually makes!

Just want to add my vote... BTC Mouse & Trackpad is sorely missed on 7.0.4 on my iPad Mini retina. Looking forward to the update.

I'am waiting for BTstack GPS support on my ipad air. I hope you can fix this soon! regards, Marco

idem here: waiting for that update (btc mouse & trackpad), I don't get why apple doesn't allow BT mous by default.(actually i understand that it's for macbook air sales) At least on android, you don't have to pray for having a mouse. Only thing is, overall, i find that apple hardware is performing better (especially in the touchscreen area, the overall size) But no congratulation for their "all-jailed approach" Toshiba did it with their sublime excite (at270) 7.7 super amoled tablet...., but they support mouse at least. I WANT MY BTC (t-shirt) needed ? :) Or Bring back my btc to me ?

Best regards

Simon

yup, no iPad Air ios7 BT mouse (that works with pointer that shows up) yet. cant wait until there is, make things easier for sure. THANKS!!!

Is there any hope to get working software in this month?

Yes, there is. BTstack GPS is almost done and should be out within this week, probably with WeBe++ following a day or so later as it is quite similar.

Then, I'll look after BTC Mouse & Trackpad.

Comment deleted

Hello again! =。= I've purchased BTC Mouse & Trackpad on my iPad3 (iOS 7.0.4). But when I for the first time tried to activate it, it just says 'Sorry, you are not eligible for...' What should I do? Thx!

I'm waiting for news about GPS BTStack

Thanks

Comment deleted

Hi! I'm waiting for GPS BTStack too for iOS7 too :)

Comment deleted

Hi! I'm waiting for GPS BTStack for iOS7 too I purchase BTStack GPS & I now I can't using the gps info in other app like sygic. & Other problem is that I should access to the internet for activation every time I launch BTStackGPS! Can anybody help me?

Comment deleted

Comment deleted

waiting for BTstack mouse to be working on iPad Mini IOS7.0.4 evasi0n JB. I installed it but force closed and rebooted to save mode every time. anyone with solution please advise me, thanks

Cant wait to see BTStack coming for ios7. Thanks so much for your hardwork Matthias

Some idiot managed to disable my iPad Mini and had to restore to 7.0.6. Can't wait until BTC Mouse & Trackpad supports it! Good luck man.

BTStack GPS 1.8 work perfect iPad 3gen Thanks Matthias¡¡

BTStack GPS 1.8 excellent on ipad air, from Chile. thanks for the effort...

Hi, Also looking forward to an update for BTC Mouse & Trackpad to support ios 7.0.6. Keep up the hard work! Thanks in advance!

please help out with the ios 7.0.6 BT mouse fix my wife updated the ipad to 7.0.6 and now the MM dont work!!!!!

Please update btc mouse and keyboard for ipad mini retina.

Btc mouse/keyboard for ipad mini 2 iOS 7.0.6 don't work. Please help!!!

ipad mini 2 iOS 7.0.4 btstack gps 1.8 bluetooth not accessible! not working on my IPAD mini retina

Can someone help me fix this? I have a 128gb iPad air and will not install. When I downloaded controllers for all on my iPod it worked fine.

I see the BTStack GPS has probelm with 'konect'tweak. when I try to install Konect it notify that it should uninstall BTStack. Please examine this problem. Thanks

Hey Mattias, when in March do you think you will release Blutrol? Could this be a birthday present for me on March 19? :) Thanks a lot!

Hi. Is there any other way so bluetooth mouse will work on ios 7 ? On ios 6 is working perfect but now i cant wait. I miss it.

hello sir,it can't work on ios 7.0.6 for 4s ,i can't wait for new version!thanks a lot~

Hi Matthias! Timing has been repeatedly postponed, our tank forces have already won the Crimea, and a decision on the mouse still does not. How do I know once the update is available? Thanks

Any good news , ipad air 7.0.6

@omnia6890: I don't know 'konect' tweak yet. looking at the description, it uses it's own Bluetooth stack. This is possible while BTstack is installed but not active.

BTstack GPS is out since two weeks and I'm back from winter vacation. I have a basic version of BTC Mouse & Trackpad working on iOS 7.0.x and have to look after a few issues/missing features.

@d0ug1asf0019 Blutrol will have to wait for BTC Mouse & Trackpad, so no Birthday present for you. sorry.

I hope you can release the BTC Mouse and Trackpad tweak soon. I can't wait to get it again. Thank you for your hard work Matthias!

Hi Matthias: It's really a good news that you already have a basic version of BTC M&T working, hope you can release the final version soon.

thanks a lot, keep on the good work :-)

well....let's think twice before updating ios next time...isn't it ?

2014-03-18 9:09 GMT-04:00 :

Hi Matthias. Will btc mouse and trackpad work for Ipad retina ? I cant wait till that day. Wish you the best. Mary.

Hi Matthias. you can release the basic version of BTC for testing on ipad air with 7.04, you recommend update to 7.06…7.1

thanks in advanced Patrici0_

Comment deleted

cant wait for btc mouse for ipad retina +1

Hello Matthias! When BTC Mouse & Trackpad is out, it will be compatible with Veency VNC Server? It would be very important to me!

Good news. BTC Mouse for iOS7 is out. My ipad connected to the mouse. But, no mouse tail shows on the screen. Using iOS 7.0.6 iPad Retina.

BTC Mouse and Trackpad for iOS7 has appeared to put my phone into a reboot loop. It will load to the lock screen, but no touch controls will work. After some time the phone will crash and then restart the springboard.

It looks as though I will have to restore, so I will test it again with a completely fresh install while I'm at it, I guess (before I restore from backup).

Comment deleted

=============

Previous Post: (See update below)

I have had to follow steps to boot my phone in "safe mode" (hold Volume up button while booting) to boot without loading Cydia tweaks. This was the only way to get out of the crash loop. Now I have gone and removed just BTC Mouse and Trackpad, and will boot again normally to see if the actual tweak was the problem, or if it was in one of the dependencies.

Specs: - iPhone 4S - iOS 7.0.6

=============

Update:

Ok I have got to the bottom of this. When I booted in "safe mode" I noticed Cydia mysteriously had 3 "updates", which turned out to be the dependencies of BTC Mouse & Trackpad. I installed them and then reinstalled BTC Mouse & Trackpad again.

This time I rebooted and I could access the touchscreen, and the boot loop was gone.

There may be an issue with the way this tweak is bundled against its dependencies, and if there is a cydia error during installation, there is a situation where a user could have BTC installed but not the dependencies, creating a condition for the springboard crash loop.

Of course, the issue could just be with Cydia itself, not sure which. Hopefully Matthias will see this and offer advice on what may have happened.

Ok one more update for today:

I have installed it on both my iPhone 4S (now stable) and also my iPad 3rd Gen. On the iPad 3rd Gen., it pairs with and works fine with my magic mouse. On my iPhone, however, it will not detect the magic mouse in discovery mode. I am wondering if any of the iOS reset functions (like reset network settings) might help me to pinpoint that particular issue.

My goal however is not to use my iDevices with the magic mouse (it was just around to test with), but the combo Adesso BT keyboard/trackpad, which I have two of. I will get one for testing with both devices and report my findings.

One more bug to report:

Suppose I pair my magic mouse and then do something that requires restarting the springboard (updating Chrome Downloader +, for example).

Then when I auto-reconnect, the device will actually be connected, but the mouse icon (arrow) will not appear. I know this is happening because I can still control the device when I click on stuff and drag, etc., also since I have had for a long time another unrelated bug on my iPad where when I touch it will show a circle beneath where I am touching. Sometimes these circles will get stuck somewhere on the screen, and I will have to respring to get rid of them.

If anyone has ever heard of these appearing touch circles (some debug thing in iOS for Apple developers that's supposed to not be in the release version?? from some other tweak??) and knows how to get rid of them, thanks for sharing any info on that.

On ipad mini retina btc works great. Just the movement of the pointer is not so stable is like a bit slow but it does work. Congratulations to Mr Matthias for his time spending for all this. I appreciate it.

I installed but no mouse appears. Can you tell me what I'm doing wrong. The mouse I have is bluetooth.

I have ipad 2 7.0.4 iOS

Comment deleted

I am in the same situation like before installing, but with 5 dollars less. No mouse, no nothing. I can saz that witj this mouse I worked fine with old BT mouse and work great on Android naturally....

1 more bug.

not possible to pair a mouse that use empty pin (or not pin) (instead 0000)

the mouse is listed on the avalaible device but when pairing process is started a pop up appears with this error: impossible to pair, check the mouse is on, near to the device and ready to pair.

BTC is working with different mouse and the mouse having issues is working correctly in my laptop.

The same mouse was working correctly with previous versions

I have a lenovo bluetooth mouse which works great. I dont know what mouse you use. After pair the device you will see the pointer on the screen.

to complete my bug report #110:

Micorsoft notebook mouse 5000, Pairing in my laptop with 0000 is working perfectly.

Philips mouse SPH-9000 (I need to use this one in my car, becouse have a special optical control system), pairing in my laptop without PIN (or empty PIN in windows8) not working becouse pairing is not possible.

I have an inland optical bluetooth mouse. It works on my iPod touch 4g but not on my ipad2. Yes I deactivated from touch before trying to pair on ipad, no luck. Going to buy a diff mouse to see if the current mouse is the problem.

In cydia btc mouse & trackpad portion it still shows compatibility 6.1. Is this why my mouse isn't showing? My iOS is 7.0.4. On my iPod touch though, lower iOS 6.0.1, it shows compatibility 7.x. Do I need to rejailbreak my ipad and cydia?

Hi Guys. Thanks for all the feedback. I'm afraid this gets chaotic. Feel free to file independent issues, if no one else did before you.

Crashes: I've tried it on iPhone 5S/7.0.4, iPod Touch 5G/7.0.4, iPad 3/7.0.4, iPad Mini/6.1.2 and iPhone 4S/6.1.2. It doesn't crash on any of them. If it crashes, I'd suspect an incompatibility with other tweaks. Please provide the crash log and the list of installed tweaks for further investigation.

No mouse pointer: please "forget device", reboot, and try again.

Not showing in Cydia: please go to Changes, tap refresh and wait until all updates are loaded

Mouse working on one device but not the other: as it's the same software on both devices, I don't think it's a problem of BTC Mouse & Trackpad

Pairing: iOS Bluetooth supports Secure Simple Pairing (Bluetooth 2.1and higher). In this case, no PIN is needed (both implicitly will use '000000' AFAIK). With some older device, pairing is confusing. Some use a '0000', some allow to connect without a PIN. BTC Mouse & Trackpad tried to alternate between pairing with authentication and pairing without.

HI Matthias, thanks for answer...

about the pairing issue, there is something I can do/Try ro have my mouse working or there is not chance?

Last versions BTC working for sure with this mouse was 1.5.1 (I'm still using it in my Ipod 4g)

thanks again for help

@reled: not sure. There's no functional change between 1.5.5 and 1.6. If you like, you can enable packet logger in the prefs, and try to pair both on the iPod 4G and your current device. Then post the file /tmp/BTServer.pklg for both so I can look for differences.

Hi Matthias, here the logs, 1.5.1 still ok on ipod 6.0.2 1.6 fails on 7.0.4

it will be really great if you can give a look...

thanks a lot in advance for help....

Mouse iTec Blue Touch 243, not discovered from bluetooth, it not appear on the list of devices. The mouse is working in other pc without problems. Maybe there are mouse that are working and others no? Iphone 5 7.0.6 Ipad retina 4th 7.0.6 both are not working. What can be ? Thanks Regards

Matthias, i can't get mouse to work. In Cydia btc mouse sections, it still shows compadible 6.1 I believe to be the problem. This is my ipad 2 ios 7.0.4. However, on my iPod touch 4g, it shows compadible 7.x. Do i need to uninstall cydia and reinstall it. I've tried everything including rebooting. I appreciate you help...

Comment deleted

Comment deleted

Comment deleted

iPhone4s 6.1.3 BTC1.5.5 is Bluetooth Mouse pairing works iPhone5s 7.0.4 BTC1.6.1 is Bluetooth Mouse pairing not works, devices not appear in list

what?

Matthias, great work, congratulations from Chile.

Regards

Ok I did, now work fine with iphone 5 7.0.6 and Ipad 4th gen 7.0.6 both mouse and keyboard together. This is for who havo not listed mouse : for first I installed old BT Mouse, so I connect mouse with it and worked fine. After I disconnected mouse and with BTstack I was back on IOS bluetooth and magically mouse was listed and working fne together with keyboard. I hope this will help.

To make it work you have not to disconnect mouse from BTmouse , but without disconnect in BTstack go on IOS bluetooth and so it work fine, .

Please somebody test it's working with Veency via VNC Viewer!

mouse notworking on ipad 2 not even detecting it. going to buy a new one to see if it works.

another mouse tested and working correctly (logitech T630) on Iphone4 7.0.6 BTC 1.6

still issues with Philips mouse SPM-9800/10 most probably caused by pairing without passkey (I have to leave it blank in W8).

@Matthias: I already posted as per your request the BTserver logs (working on 1.5.1 and not working in 1.6) on post #118.

maybe this can help: you already fixed this issue in the past in version 1.5, the same mouse was not workning in 1.4.3 (in the change log is reported: "fix: pairing device that don't use '0000'")

I have also seen the same situation with #126, no mouse wasn't listed in bluetooth setting. So, I tried to install the BTStack mouse and run and disconnected. After that the mouse was appeared in bluetooth setting. BT mouse & trackpad is great software! Thanks Matthias!

for your information/help I had ios6, using btcmouse.. It wasn't working anymore when i updated to ios7, my bad.

Yesterday, I've updated the btc mouse finally.

And it wasn't working at all for me.

So for any of you who have problem with it here's my advice:

uninstall and reinstall everything related to the bluetooth...before reinstalling btc mouse...

It worke dfor me

Thanks for the update Matthias!

IIMPORTANT FOR ANYONE WITH AN ARMX64 DEVICE: Will Btc mouse work with newer devices? For example,

Is it confirmed that this tweak works with devices like iPad Air or iPhone 5s? (Assuming one jailbreaks their device for the first time, and no other tweaks are installed?)

My magic trackpad won't show up on my ipad air with BTC mouse and trackpad installed (i've reinstalled and rebooted, still no luck) I have included a package log which suggest that the ipad sees the trackpad, but gets a connection timeout. I just bought the tool when the ios7 update came out and hope that this can be fixed!

Ironically, the free BTstack Mouse does work with the same configuration of my ipad air and magic trackpad.

Sorry for the spam, but after installing BTstack mouse, finding my trackpad, removing BTstack mouse again and reverting back to the iOS stack, i do see the trackpad in the list. However, when it connects a mousepointer shows up for an instant and then the bluetooth switches off and on again.

Whoever you are THANKS. I followed the directions below.

1. Removed all devices that were using bluetooth. My Brydge keyboard and it's bluetooth speaker.

2. Removed BTC Mouse & Trackpad from within Cydia.

3. This is an important!!! Ran iCleaner to remove everything. Note: I have also removed all my jailbreak apps on Sunday. The only jailbreak apps were Cydia & iCleaner.

4. Installed BT Stack Mouse and click BTStack active under "Active Bluetooth Stack".

5. Closed everything. Reboot the iPad 4/Retina.

6. Open BT Stack Mouse again, and click iOS under "Active Bluetooth Stack". Waited 30 seconds. The iOS line was active.

7. Open Bluetooth and turned on my Apple Wireless Mouse. Bang! It was found and in all its glory the mouse pointer!

Thanks! Domingo E. Mojica

Sent from my iPad

137 Domingo I've tried that but doesn't work on my ipad 2. Still doesn't detect my mouse. Going to buy a new one to see if that one will work.

Just bought BTC mouse and trackpad for ipad air ios 7.0.6 and its does not work with apple Magic Trackpad. It does not even find it when in discovery mode. Iim trying to figure ou how to attache log file.

I found similar issue as #136, finally got my trackpad on the list with my ipad mini r, but then intermittent connect and disconnect by the btc , tried to remove just the btc , and the connection become stable , however no pointer or mouse function show up

Here is log.

Comment deleted

FYI: I created the steps found in #137 above. Loaded all my jailbreak apps. Still mouse is visible and working.

My son-in-law has problem using some unknown brand BT mouse. I gave him another Apple Magic Mouse and now his iPad 2; iPad Air; iPhone 5 & iPhone 5s are all seeing the mousing. He had to follow my steps for his four devices to work.

We think the key step, to make it work, is using iCleaner. iCleaner must be cleaning something that was left over or not letting the mouse to be seen by iOS 7.0.6 on all of our devices.

Mathias, again thanks a million. You're the MAN!!! Look, Ma, no finger prints on my iPAD!!!

This crashed my iPad 2 and put it into a constant reboot. This is also not working on my iPhone 5s.

Hi there. Here's some feedback and troubleshooting advice

Reboot loop: just cannot happen because of BTC Mouse & Trackpad

Springboard crashing into safe mode: shouldn't happen. please de-install other tweaks and try it alone. then add them back to see if one particular tweak causes this

Bluetooth crashing when connecting to Apple Magic Trackpad: this happens for me too, so it's easy for me to fix it. just wait for an update.

Mouse not showing up: reboot, then make sure Bluetooth settings shows "Extensions: BTC Mouse & Trackpad". Make your mouse is a Bluetooth mouse (not just wireless) and it is discoverable. It really should show up. If not, please try with a different mouse

Mouse doesn't pair: has been reported e.g. with Microsoft Notebook Mouse 5000. I've found one online and ordered it. will test & fix when I get it

Mouse connects but no mouse pointer: weird. please reboot and try again.

HI Matthias, maybe some misundestanding on my feedback...

Microsoft mouse 5000 is working with BTC, tested by me.....(pairing with '0000' key)

problems are with the mouses pairing with empty key: Philips SPM-9800/10 in my case.

this kind of mouse were working in 1.5.1 (was fixed by you in this version, broken on 1.4.3)

see the log related to (1.5.1 working and 1.6 not working)

Here's my report for 3 BT devices on 2 iOS platforms. Rebooting does not change anything for any of these, so I will now try Semi-Restore. The Adesso (which is the perfect product for BTC Mouse and Trackpad! I miss iOS 6...) is this: http://www.computershopper.com/keyboards/reviews/adesso-bluetooth-slimtouch-mini-keyboard-wkb-4000bb

- iPad 3rd Gen.
    Adesso:
        - asked for passkey when pairing with Adesso only on iPad screen, all of "Cancel", "Pair" with blank field, "Pair" with 0000 reset the BT search
        - could not pair keyboard part or trackpad part
    Magic Mouse:
        - connects
    Magic Trackpad:
        - Crashes Bluetooth, will get stuck in loop where Bluetooth resets, trackpad connects and works very briefly (with no mouse cursor visible), then crashes again

- iPhone 4S:
    Adesso:
        - only connects to keyboard part, trackpad part is not detected for pairing passcode typing request
    Magic Mouse:
        - doesn't detect
    Magic Trackpad:
        - doesn't detect

by "passkey", I mean a dialogue on the iPad where you are expected to type numbers but you don't know what they're supposed to be (no other dialogue to show numbers to type, and typing from the Adesso keyboard doesn't work yet)

Comment deleted

Comment deleted

Another update: the iPad gets the following results after using Semi-Restore:

    Adesso:
        - only connects to keyboard part, trackpad part is not detected for additional pair/cancel dialogue box
    Magic Mouse:
        - doesn't detect
    Magic Trackpad:
        - says it's connected but no cursor and no effects from clicking.

I do not think Semi-Restore will fix the issues for iPhone either so I will not test iPhone after using S-R. Hopefully we can get the same level of functionality we had in iOS 6!

Thanks for the good work so far though

Whoops, I meant the Adesso is this one (same but no BT receiver dongle): http://www.amazon.com/Adesso-SlimTouch-Bluetooth-Keyboard-WKB-4000BM/dp/B0045JFU4I

@rled: lol. well, I guess I'll get another spare mouse then. The Philips SPM-9800/10 is directly available in online shops in CH and I've ordered one, too.

@kieran.coulter: the Magic Trackpad really crashes on iOS 7. I've already fixed the crash, but now it sometimes works and sometimes doesn't. Will have to spend some more time testing. The Magic Mouse should work, it does for me. The trackpad of my eLive works. Test your Adesso again, once the Magic Mouse works.

@Matthias: if you solve the issue with it I will be happy to refund you the cost for the Philips mouse... lol.

I really need this one, is having a full control optical sensor, with it you can control the mouse with 1 finger. I dismount it and I have it mounted in my car dashboard... so I can fully control GPS, Music Reader and everything....... (I'm using WEBE++ right now as replacement...

Comment deleted

off course using the 7" in dash screen as monitor (the Iphone is hidden somewhere...)

Hi Matthias. Thanks for your reply. I should describe in detail the behaviour for the Adesso I'm expecting, the one that allowed me to use both the trackpad and the keyboard functionality from it simultaneously.

On iOS 6, two pairing requests would appear when connecting the Adesso, which I assume was one for the trackpad part, and one for the keyboard part. The trackpad dialogue was modal on top of the keyboard dialogue, so I would just click "Pair", and then for the keyboard dialogue I would type the 6-number code and hit enter to have everything working.

In iOS 7, I only get the keyboard dialogue appearing, the trackpad seems to be ignored.

As an aside, I was testing the magic trackpad and mouse only to help with testing, I'm not so much interested in having those devices working with my iPad. I'd really like to have the Adesso working (trackpad and keyboard together), so that I can use it with DisplayOut, and then start to make tutorials to show how to set up Theos on an iDevice so more people will hopefully contribute to the Cydia scene (which I worry is dying a bit).

I am a Cydia tweak maker as well so I am happy to help someone who is making one of the best tweaks out there! I've attached the pklg file for the configuration I want to get working the most (iPad + Adesso)

hi there, after keep on uninstall and install btc , I finally found my Microsoft 5000 listed and working , however still no luck with the trackpad, anyway I am happy with my 5000 now

Just bought Microsoft BT mouse H3S sculpt comfort and still does not detect it on ipad air 7.0.6. '

Matthias, Please help or offer possible reason why nothing working. Do u have update coming? I also tried uninstall both your packages: Bluetooth Companion and BTC mouse adn track pad but for some reason when springboard restarts the mouse options are still present in settings. Is there another package I need to uninstall to completely remove it and try again. I feel like someting is left over and maybe that my issue

Follow the directions I posted in #137. It has worked on 7 iPads and 6 iPhones. Using Apple & M$ mouses.

Finally got it working per domingo. reading #137 carefully i realized that BTC mouse and trackpad is differetn from BT stack mouse. I needed to install bt stack mouse in order for it to work. Why that is i have no idea. it does not say to do that but thats how i got MS BT mouse working with no issue. pointer is great all is good.

Maybe someone can explain this. If u read this and your like me u need to install BT stack mouse as well as BTC mouse and trackpad.... im on ipad air 7.0.6

Big shout out to matthias for it!!!

One more small update (I want to be as helpful as possible because this and DisplayOut are by far my favourite tweaks from Cydia!):

I was able to get Magic Mouse and keyboard part of Adesso working concurrently by following the steps in #137. There may be some conflict with the other app called AirBlue, not sure about that.

Who else had AirBlue installed when they tried and it didn't work? Does it not work with AirBlue, then try #137 steps, add just AirBlue and test again, then again without? I wish I could test more but I really needed to get some working combination for what I had to do myself (another tweak).

Anyway I am happy to help with any other testing - I have another Mattias keyboard with On/Off BT functionality so that can help to test if connected keyboard devices can switch to disconnected and back and reconnect quickly and easily. With Magic Mouse reconnecting seems great and easy. If your device locks you can just unlock and click the mouse and it's back again. My Adesso takes a bit longer to start responding but reconnects pretty well too.

I know the dual BT request the Adesso combo keyboard/trackpad makes is probably the most complex case. I was seriously so impressed the first time I saw it work on iOS 6.

Great work Matthias! I'll post links for my tutorials, in the meantime if anyone else comes here using it for coding, then I recommend Textastic, and setting up path shortcuts in MobileTerminal. There's already one Theos Tutorial that is pretty good. You can also do C, C++, Python, Ruby, and Perl directly on the device if you want.

spoke to soon. Mouse works but freezes up and then caused my ipad to freeze entirely. Finally got it booting again. Question to matthias. Does Bt stack mouse and BTC mouse and trackpad both need to to be installed or should this work with just BTC M andT ?

Please adivise.

I wish it was possible to edit comments! Sorry for spamming. I am done here as somehow as I was readding in my other Cydia tweaks I always use, the trackpad on the Adesso started to work. I wish I would have time to help pinpoint the exact combination of things that allowed everything to work. I think #137 was the most important - build up for tweaks starting from scratch with this one first, I think especially other previous BT apps will cause a conflict. I installed BT stack mouse as well even though I didn't use it (not changing to the other stack), but maybe it helped somehow.

Also maybe a couple of resprings/reboots is somehow helping the internals get sorted out.

Going to try one more time to get the same setup going for my iPhone too, and will put one more post to hopefully confirm it worked, and a list of very specific steps.

Comment deleted

Ok I repeated the same steps for my iPhone and it works. So really I think most people are dealing with inconsistent states in their phone or Ipad involving other tweaks that conflict, left-over files, etc. Starting from a blank slate is the best.

I recommend people try semi-restore on Windows that will really help make sure you are starting from scratch. You can do an iTunes backup just before, do semi-restore, and do restore from iTunes, and all the Cydia stuff will be reset while the regular stuff is back as normal.

Also InfiniDock will definitely conflict so I am giving it up even though I purchased it. BTC Mouse/Trackpad is way more valuable!

Comment deleted

I've finally found a pattern in the disappearing mouse icon. Whenever you install a new tweak that requires respringing, after respring the mouse pointer will be gone. Simply reboot to get it back again. I thought it was a conflict with another tweak or two but I don't think that's the case anymore (although it might still be the case for getting it working at the beginning).

Ok so there is an issue with losing a pairing (not temporarily, I mean when you pair to another device), and then trying to get it back again.

For example, after pairing Adesso keyboard with iPhone, it was impossible to get it to pair again with the iPad. It would give me a prompt expecting some passcode and nothing would work (this is behavior like in my first replies here). Did Semi-Restore/#136 again on iPad. Now when I pair the magic mouse first, and then add Adesso after, I get the 6-number passkey to type on the iPad as I'm expecting, not the empty one like before.

It seems like to get a combo keyboard/trackpad to work, this is the easiest way. Get a separate BT mouse (even just temporarily), pair it, then pair the combo trackpad/keyboard, then the trackpad will also work.

This is good enough for me, I am going to dedicate the Adesso to the iPad and not ever repair it with other computers, so I don't break the connection again.

That's the last test for me for awhile! The new features (are they new?) to click to awake the screen, use mouse to unlock device is all great. It means you can really keep a remote access to iDevice if you are connected to a monitor too.

Finally got it to work...Read domingo1 #137 over again and under stood that I had to install BT Stack mouse too. different tweek than btc mouse and trackpad. this is great..love the mouse pointer...

update: I removed by stack mouse and now iPad running stable with mouse and mouse was not effected by removal. it weird because bt stack mouse also installed 2 programs : activator and mouse icons . when I removed bt mouse they went too. all looks good so far.

no idea this was fix because no cares to explain why all these issues. figure I will share this info because I know other people having same issues.

Did the same as per #171 and mouse was gone. Had to redo my steps from #137. But this time I left all my jailbreak apps in place (did not remove them). Also, notice that between steps 5 & 6, I left out to install BTC Mouse & Trackpad. Sorry, for not putting that step in my directions.

Hi all. Thanks for trying all this different ideas. Please try this one, too.

If the mouse doesn't show in the Preferences and/or there's no mouse pointer although a mouse is connected, please delete /var/mobile/Library/Preferences/ch.ringwald.btc-mouse.plist. Then, kill Preferences (or Respring or Reboot) and tap to "Activate BTC Mouse & Trackpad" again. Then try pairing agin.

Matthias, how or where would I be able to do that. I'll try it. If the mouse works with just btc mouse & trackpad, would love to remove activator and bt stack mouse.

Hi Matthias,

made a test following your guidelines in #173 ... not luck for my not pairing mouse

Matthias, do you have an ETA for magic trackpad support :-)? I bought your tweak on the promise that it would work for iOS7 and the trackpad. If it isn't going to be anytime soon, would it be possible to get a refund for my purchase? I'll be happy to buy your tweak again when you've figured it out.

I have a question. I bought an apple Magic Mouse and paired it my ipad 2 ios 7.0.4. I get the mouse pointer but the scroll doesn't work. Do you think its the mouse or do you think its that btc mouse tweak doesn't support that type of touch scrolling? I have an inland mouse paired with actual scroll wheel and works. I just want to know if its the mouse. thanks

Comment deleted

I never got it to work in the old version of BTC with my Magic Mouse. Likewise with the latest version. I guess it has something to do with touch scrolling. I'm old school so it does not bother me at all. I have scrolling disable on my Mac Air hooked up to the Apple Display.

Domingo

I still don't see how installing / trying BTstack Mouse helps with BTC Mouse & Trackpad.

Magic Trackpad: I've fixed the crash of the Bluetooth server on connect. It worked once but then didn't the next time. It won't take that long. Please email me for refunds (it's easy within 4 weeks of purchase).

Magic Mouse: no gestures or scrolling are supported yet.

I don't either understand way, on my iPad Retina, I need BT Mouse. But for some weird reason I need it. If I remove it the mouse pointer and function is lost. To get it working again I have to follow my steps all over.

I found one problem which I been able to work out. If I turn off my Brydge keyboard/speaker. I have to make sure that BT M&T is connected and working, before I connect the keyboard and the speaker. If I don't follow these steps, the keys repeat when I press them!

Anyway, right now BT M&T is working like a dream with my Brydge keyboard/speaker.

PS: it was cool flying from LAX to Chicago Saturday and using a mouse with an iPad. I was asked 4 times how I was able to do that!

Thanks! Domingo E. Mojica Sent from my iPad

Matthias, I also concur with #181. BTstack mouse is only way it works with btw mouse and trackpad. I have since ran into issues uninstalling it after i got everything working so I'm just leaving it installed with BTC. I will report another issue. I use anker BT keyboard and for what ever reason sometimes your app makes BT keyboard go crazy. basically u can't control what your typing and letters don't stop scrolling across the screen. After uninstalling and reinstalling apps and keyboard its seems stable for now.i finally back to normal but there are quite few kinks that deff need to sorted out with BTC.

It seem that connecting BT M&T first and then the keyboard and finally the other BT devices has stopping the problem with keys repeating themselves while typing. I have tested it the whole day and none of the keys have repeated. Hope this helps.

Likewise, my iPad Retina with 7.0.6 needs to have BT Mouse installed to the mouse to be visible and working.

Anyway, my son-in-law told be yesterday that what Matthias was able to pull off, shows that he's in the top ten of all iOS app deveplors in the world.

Thanks! Domingo E. Mojica

Sent from my iPad

One more thing to note: Not sure if related to but ever since I update to BTC and BT mouse and track pad my wifi connection has started to suddenly stop working for no apparent reasoning. Im not sure if its related but never had issue before with wifi and bluetooth running at same time. I sometimes have to disconnect and reconnect for wifi to come back. Anyone else see this after install the BT App suites???

I haven�t seen this problem with either my wi-fi and my Verizon 4G service, Try the order of connecting the mouse and then the w-fi. I notice that I have to connect my mouse and then my keyboard, to I do not get repeating keys. Maybe try first connect the mouse, then the other BT devices and last starting your wi-fi.

184 I never had that problem. Hope you can solve it...

I have an iPad Mini and couldn't get anything to connect or be discovered with just BTC installed. I installed BT Stack and could then see it, pair to it, and then use the mouse. However after a short while, the cursor froze. I've tried two different mice as well, same result.

Comment deleted

HI Matthias, any status update?

Hi,

Great app!

But i have noticed some connection problems and irregularities .

I am having trouble using it in conjunction with the Logitech ultra thin keyboard.

When I have the mouse connected by itself its works great, but with the keyboard also connected it becomes jumpy and irregular.

This is really obvious when using apps like Jump Remote Desktop.

So much so that it becomes useless unless i disable the keyboard which is not really an option.

Hopefully this can be resolved soon.

Thanks

I get into the same problem, it seems after 4 to 5 days.

I disconnect all my BT devices, I use three of them all the time, Apple Magic Mouse, Brydge keyboard, and Brydge speaker.

I turn off Bluetooth on my iPad.

I rerun iCleaner.

I'm always surprise the amount of junk files that iCleaner removes. It seems that standard and jailbreak apps leave behind allot of junk after closing the apps. It seems some of these junk files could be from BT M&T!

After a cleaning, I turn on my bluetooth on the iPad.

Connect first the mouse, keyboard and finally the speaker.

Last point, I'm not running any other jailbreak apps beside BT Slack, BT M&T, and iCleaner. It seems all the other jail break apps cause trouble!

Matthias, you are my hero.!!!!

with the new update of bluetooth companion my mouse it works like a charm.

THANKS, THANKS, THANKS a lot.

I can use again my Iphone in my car system.

BTW: there is any way to contribute to your project? paypal account?

With the new update of bluetooth companion, will I be able to uninstall bt stack and still have a mouse or no?

I first install it and the mouse was not shown. So I did the following:

1. Uninstall all apps for the mouse, BT Stack & BTC Mouse & Trackpad.
2. Ran iCleaner. Surprise that it removed 1.1gb of files!!! Again, that when apps arre uninstall, either jailbreak or not, allot of junk is left behind.
3. Install BTC Mouse & Trackpad from Cydia.
4. Connected first the mouse. Bang! Showed up right away.
5. Then connected the rest of my BT hardware.

It's running without BT Stack and it seems very well behave. Later, I start adding a few more jailbreak apps. One at a time and make sure that everything works nicely together.

Thanks! Domingo E. Mojica

Sent from my iPad

Domingo1, I uninstalled all app, ran I cleaner but btstack still shows up in settings. Can you tell me what tweak to delete so I don't screw up cydia? I looked an cydia and it shows I don't have btstack installed.

On the Cydia "Install" page, make sure to have "Simple" (located on the upper right corner) on, any apps that under its name has "(Tweaks)" or "(Utilities)" you can remove. Do not remove and apps that under its name has "(System)", "(Packaging)" or "(Repositories)".

Then rerun iCleaner again.

Thanks! Domingo E. Mojica

Sent from my iPad

Removed btstack from setting. Ran I cleaner followed your steps but no mouse. It pairs and says connected but no mouse pointer.

Make sure to remove all the app that has anything to do with the mouse. The old BTC Mouse & Trackpad (BTC M&T), Bluetooth Companion (BC), etc.

Then re-install, on a clean machine, BTC M&T. When you reinstall BTC M&T is will pull down the latest updated copy of BC and it will install it.

I think the error of allot of us, me included, was that we download the updated BC and installed it after just removing BT Stack. I guess that's the reason the mouse pointer does not show up.

Thanks! Domingo E. Mojica 224-239-7456

Sent from my iPad

What if one of the apps that has tweak next to it ask you to either force remove it or cancel? The app if believe is called sed.

Domingo1, some of the apps that says either tweak or utilities ask me to force remove it or cancel, what should I do? I don't want to screw up cydia.

A word of advice, write down the name of all the apps that you are going to remove. So you have the names, after BT M&T is working, you can reinstall those apps.

Then follow what I did to install BT M&T on a clean machine, with only Cydia & iCleaner installed.

I am now in the process of reinstalling all my apps one at a time. I have not found any of them, so far 3 out of 5 jailbreak apps, causing any problem. Esp. the keys repeating!

I know, it's allot of steps. But, at the end you have a sable iPad/iPhone with all the jailbreak apps/tweaks behaving.

Thanks! Domingo E. Mojica 224-239-7456

Sent from my iPad

i see Matthias updates bluetooth companion in cydia. I update it.lost mouse connectivity and but was able to get it back with very little playin around. seems more stable to me. Keep updates coming

please post on issue #365 so I only need to read/post on a single thread.

Please help..I had to restore my ipad and not it gave me IOS 7.1 and can't jailbreak my ipad. How can I restore to 7.0.4? Please help.

7.1.1 JB is available, BTC will support?

Nice! I don't know, please try and report. I don't expect changes for minor versions (7.0.x -> 7.1.x)

tested BTC no issue with 7.1.1 JB , but no way to test displayout as it forced to < 7.1

Hi. I JB my 7.1.2 mini and Install BTC GPS. Try to connect to Samsung Galaxy S2 Bluetooth. NO LUCK.. Any idea??????????????

Problem connecting to Holux GPSlim 236 with iPhone 4S IOS 7.1.1 and BTS GPS 1.8-1. Application recognizes the GPS device, but unable to connect. Works fine under IOS 7.0.4.

Comment deleted

I got it to work by deleting any preference file that said "ringwald" or "mouse" using iCleaner. Finally!