What steps will reproduce the problem? 1.Install btstack from nitoTV 2.Go to Settings -> Custom Settings -> btstack 3.On the "Searching..." page, "Wireless Keypad" appears and I can see its address and Device Type (HID Device) on the lower left part of screen. 4.Selecting the Wireless Keypad device asks me to Enter '0000' but anything I enter here seems to be "ignored".

What is the expected output? What do you see instead? Nothing happens. I get stuck at "Pairing: Enter '0000'" until I hit back to return to the BTstack devices window. I tried entering 0000 [enter] at different speeds, adding more 0s and hitting [enter] twice (in case some keys would be ignored or something) & other combination without success. I can see in BTstack logs that some stuff connected, but LEDs are still blinking on the keypad showing it still hasn't paired successfully.

What version of the product are you using? On what operating system? BTstack 1.0.0-4 (installed from nitoTV) AppleTV2 iOS 4.2.1 (language set to french, although I doubt it matters) Jailbroken with Greenpois0n RC6 PS3 Wireless Keypad (the small keyboard that clips to the DualShock joypad)

Please provide any additional information below. The PS3 keypad is detected AND pairs just fine with my iPhone4 (Apple BT stack) so I know it can be paired to other devices than a PS3 console. When pairing it with the iPhone, as soon as I enter the keycode and hit enter, the LEDs on the keypad stop blinking and the keypad works.

I also tried launching btstack (keyboardd) directly from ssh (comparing to the youtube video linked on your 2010-10-31 news link):

AppleTV:~ root# keyboardd launch_msg("CheckIn") IPC failure: 1BTdaemon started - stdout BTdaemon started - stderr Starting BTstack BTstack working BTstack working HCI_EVENT_CONNECTION_COMPLETE from 00:24:33:F7:C8:96 Issuing role switch to become Master.

The last 2 lines appear as soon as I enter the "0000" keycode and hit [enter]. Same behavior though: the ATV screen stays on the "Enter '0000'" screen and LEDs continue blinking (trying to pair) on the keypad.

hi. could you also upload /tmp/hci_dump.pklg which contains the complete Bluetooth trace.

Hi Matthias. Here it is. If you need anything else, let me know.

hi. I need the log after you tried to connect. the one in #3 just shows Bluetooth init

Hi Matthias, sorry about that.

Here's a proper logfile.

Just so you know: I reset the ATV2 (not sure if that clears the log or not). Then I immediately launched BTstack from custom settings menu. it detected the Wireless Keypad and I selected it. It asked for '0000' keycode, which I entered a couple times (including Enter). Then I hit "back", and selected the Wireless Keypad again. The 2nd time, it gets stuck on the "Connecting..." screen rather than the "enter '0000'" screen that immediately follows it on 1st try. I'm stuck there until I hit "back" again to return to the "BTstack devices" screen.

*= I forgot which button it is on the original remote, I have it remapped on my Logitech Harmony.

i have the same action - do you know how to solve ?

No solution yet. Hopefully Matthias will find something useful in the logs.

@michel: (sorry that's a really late answer). In the log, the keyboard declines the connection with error 0x0004: Connection Refused, no resources available. To be honest, I have no idea why it behaves like that. Maybe it is already connected to another device at this time? Can you make sure that's not the case?

Hi Matthias. Sorry for my late answer too.

I confirm that the device is not already connected to another devices. The procedure to make new connection is to hold the blue button while turning the keypad ON (LEDs then start blinking and they keep blinking until the device has successfully paired to something). The LEDs keep blinking all the time while I'm trying to pair it to the Apple TV. If it had already connected to some other device, the LEDs would stop blinking.

I've updated to iOS 4.2.2 (AppleTV2,1_4.3_8F305_Restore.ipsw) and btstack 1.0.1-1 (I think) since my initial post. I just retested and got the same problem/symptoms though. Would you like me to send new log files anyway?

I said I "think" I'm using btstack 1.0.1-1, because I'm not 100% sure how to confirm: on the NitoTV list of softwares, it says 1.0.0-4 (I thought this screen was displaying the current installed version and would say "Update" instead of "installed" if a new version is available) and when I select BTStack, it says 1.0.1-1 (still shows a "install" button instead of a "update" button). I tried to hit Install anyway to make sure I get the latest version, but then it says "org.tomcool.btstack-ui is already the newest version / 0 upgraded, 0 newly installed, 0 to remove and 11 not upgraded.".

Let me know if there's anything else I can do.