|
| File: |
|
| Description: |
SPECIFICATIONS
1. This code must run on the Arduino on the hacked RC Car.
2. The Arduino must be wired to the RF Rx Module as shown in http://www.open.com.au/mikem/arduino/VirtualWire.pdf Figure 4
3. The wires connected to the RC car need to be soldered onto the pcb in the RC car.
DESCRIPTION
This code receives the RF Transmission using the Virtual Wire library and then sends the corresponding data signals to the hacked RC Car wires determining how the RC car will move. |
| SHA1 Checksum: |
d915ed044af1977f6023da78e349545f3b0a81e7
What's this?
|
|
|