My favorites | Sign in
Project Home Downloads Wiki Issues Source
READ-ONLY: This project has been archived. For more information see this post.
Search
for
  Advanced search   Search tips   Subscriptions
Issue 8: Megalinear lengths must be divisible by pitch
1 person starred this issue and may be notified of changes. Back to list
 
Project Member Reported by lutz.and...@gmail.com, Apr 27, 2012
for example, MTD 8 can have only lengths divisible by 8. If a customer enters 640mm then this is OK. if they enter 645 this is not possible.

AT10 10
T5 5 
RPP3 3
and so on.

Apr 27, 2012
Project Member #1 lutz.and...@gmail.com
same applies to rubber open end and to megaflex. Actually all timing belts.
May 14, 2012
Project Member #2 gzoli71
Megaflex is not included in version 1.1
May 14, 2012
Project Member #3 gzoli71
We decided to ask the user the number of teeth, so the length will be calculated like number of teeth multiplied by pitch. See configuration 4 and 5.
May 15, 2012
Project Member #4 lutz.and...@gmail.com
I am here with Eliza and she agrees it is a mistake. We agreed to ask for length and if the length does not match the pitch then we provide the closest length. We can put a note on the length input field that the length must equal a multiple of the pitch and state the pitch.


May 15, 2012
Project Member #5 gzoli71
I have changed the ProductConfiguration document based on this conclusion. Configuration 4 and 5 are affected.
Jun 3, 2012
Project Member #6 gzoli71
This is implemented in config 4 and config 5.
Status: Fixed
Labels: Milestone-1.1
Jan 29, 2013
Project Member #7 tam...@gmail.com
(No comment was entered for this change.)
Status: Verified

Powered by Google Project Hosting