Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

LAVFilters-0.74.1-20 Dolby Atmos issue again #302

Open
cmichaelhk opened this issue Aug 3, 2019 · 10 comments
Open

LAVFilters-0.74.1-20 Dolby Atmos issue again #302

cmichaelhk opened this issue Aug 3, 2019 · 10 comments

Comments

@cmichaelhk
Copy link

2 months before, installed the nightly build 0.74.1-20(bitstream to av receiver), fixed the dobly atmos problem(no sound after few times seek, receiver keep displaying Dobly Atmos) with UHD Black Hawk Down. But today, when I watch uhd Alita Battle Angel(rip) and uhd Avengers Endgame(iso rip) same problems found again. After that I try Black Hawk Down(rip and original disc with anydvd) agian and it also got no sound after few times seek.

I already tried roll-back the RX480 driver to 19.4.3-apr22 and 19.7.1-july7 still no luck...….

@Nevcairiel
Copy link
Owner

If LAV didn't change in 2 months, and the issue still came back, its probably something else, and not LAV.

@cmichaelhk
Copy link
Author

Yes I know. So I am now reinstall windows and will test again....

@cmichaelhk
Copy link
Author

cmichaelhk commented Aug 3, 2019

after re-install latest Windows 10 and only install rx480 driver, Lav filter, MPC-BE, same no sound problem found. Will it caused by windows update? As I found the problem in pervious installed windows seem occure after windows updated. And now, my workaround is change to dobly 5.1 then change back to atmos

@cmichaelhk
Copy link
Author

I am sorry that I seem found out the problems.
As the yamaha CX-A5100 default 4k mode is mode 2(just like safe mode in pc) that will cause HDMI in low bandwidth so that I think that caused the sound problem when playing 4k hdr content.

How to know you are in low bandwidth mode for me in windows 10? Goto the page that change screen resolution page. If the recommend resolution is 1920x1080 that is in mode 2.
To change back to 4k native mode, please visit
https://www.google.com/amp/s/www.avsforum.com/forum/90-receivers-amps-processors/2963648-how-fix-problem-yamaha-cx-a5100-other-yamaha-avrs-don-t-pass-hdr.html%3famp=1

This fucking setting already cause me confused when I just changed to 4k TV for a years.

P.S. If you got blank screen problem when switch on the PC after change to mode 1, try enable CSM support in BIOS (when I disabled the CSM, my PC with rx480 will not start + blank screen + no beep sound)

@Nevcairiel
Copy link
Owner

So just to be clear, with it set into proper 4K mode, Atmos now also functions properly?

@cmichaelhk
Copy link
Author

Yesterday I test the atmos sound seem ok.....but today sound will lost again.....

@danbezerra
Copy link

Atmos has been working flawless to me as well since the 0.74 update. But yesterday I watched Toy Story 4 (always a Disney title!) and first I could sense a micro drop of sound during what seems to be seamless branching points. That was very minor until the very end of the movie where the sound just dropped completely. I had to go back one chapter to get the sound going on again and then skip forward to where I was before. So it seems that this issue is not yet fully addressed, although much much better than pre 0.74. as FYI, I am using a Denon 3200.

@aoaaron
Copy link

aoaaron commented Oct 18, 2020

Same .. still ongoing issue.

@ParcelRot
Copy link

ParcelRot commented Oct 22, 2020

I found that if I enabled MSI interrupts (registry edit needed) for the NVIDIA drivers most playback issues disappear. I wonder if that is an option for you guys (even for AMD)?

@ParcelRot
Copy link

Oh another thing - remuxing Atmos titles (particularly Disney ones) into MKV could result in dropouts if the remuxing tool is not careful with how the Atmos packets are written. The discussion on this is pretty involved and out of scope here though.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

5 participants