Introduction
Please read through the basic install and setup instructions to get started using iMixHD.
- note: a serial cable (RS-232) will need to be connected in order for this app to run.
Details
Current version of iMixHD is configured and tested to be used with TV-One 1t-c2-750 Dual Scaler. Other TV-One units are not tested.
Hardware Requirement
- TV-One 1t-c2-750 Dual Scaler
- Serial (RS-232) to USB cable
Software Requirements
- Serial (RS-232) to USB cable drivers.
- iMixHD software for PC or Mac.
- Drivers for your MIDI device (if using a MIDI controller).
Installation
- Install drivers for your serial (RS-232) to USB cable.
- Download the latest standalone version of iMixHD for your operating system (PC/Mac).
- No software installation is required, just run the app.
Setup
- Connect the computer to your TV-One unit using serial to USB cable.
- Launch iMixHD and you will see a setup screen.
- Choose the port number for your serial to USB cable.
- After the setup is complete, click on Setup button to continue.
- If iMidHD is not responding after clicking on Setup, you might of picked the wrong serial port, please restart and try again.
- If available, choose your MIDI device.
MIDI Setup
- Click/Toggle the Learn MIDI button to On (located on the lower right).
- Click on a button or a slider graphical UI first, then move a knob/slider/button on your MIDI controller to assign.
- Click/Toggle the Lean MIDI button to Off
- Your setting are now saved.