What steps will reproduce the problem? 1.buying a Leadtek 9553 (Bluetooth GPS module) 2. Install BTstack GPS on a iPad WiFi 16GB 3.ehm... nothing, it will connect, but no satellites or data

What is the expected output? What do you see instead? Wel... no data, or anything, only that it is connected

What version of the product are you using? On what operating system? BTStack GPS 1.5-25900 on an iPad Wifi 16GB with 4.2.1 and jailbreak Greenpoison And all Cydia updates installed. With a Leadtek 9553 with an on/off switch It will connect via bluetooth, but is don't see any data. I see a map of europe, but no satellites, or positioning. The device works correctly on my Nokia N91 an E75.

Please provide any additional information below. Specs Leadtek 9553 Chipset; SiRF StarIII Technology Frequency; L1, 1575.42Mhz C/A Code; 1.023Mhz chip rate Channels; 20 Protocol; NMEA-0183 @ 57600bps Electrical interface; Two full duplex serial TTL interface Bluetooth; 2.4GHz ISM Band Bluetooth Specification v1.2 Profile; Serial Port Profile (SPP)

I have the same Problem with IPhone 3G 4.2.1 and Leadtek 9553

Me too. Iphone 3GS 4.2.1 and Leadtek 9553.

hi. can anyone of you connect to your GPS devices using BTstack and let it running for a few minutes, with the GPS receiver in clear sight of some satellites. Then disconnect and attach the file /tmp/hci_dump.pklg from your iOS device here please. I"ll try to see if I can see what's going on.

Hi.This is the file. I hope that can be useful.

I also comment that in the tmp folder are a gpsserial file who was unistalled, but still present in this folder. I don't know if it could be the cause.

Same problem here with IPAD 2 Wifi 32 GB and Leadtek 9553. Sometimes the program show the position. but it's only a still image that is not updates. I also attach the file.

PD: sorry for my english

Hello,

i have the same problem with my GPS-Mouse Leadtek 9553 and the IPad 1 Wifi 32GB. Thera are a answer to this problem?

Greetings

My Solution; Bought a TomTom Wireless Bluetooth GPS Dongle (MKII) It works perfect, and is quicker than waiting for a solution!

Hello,

and the TomTom Wireless Bluetooth GPS Dongle works also with the Navigon App on the IPad (WiFi only)?

Could you try with the newer BTstack GPS 1.7.2 and post new packet logs if it doesn't work?

Getting error: registration check failed after upgrade to 1.7.2

Any help on this please?

(Cannot do much without more information)