zhspacing - Project Hosting on Google Code

Earlier this year May 16, 2009 issue 12 (我有一个请求) Status changed by yindian - Status: Done Status: Done May 16, 2009 issue 7 (Chinese Left "（" on the first char is wrong font. ) Status changed by yindian - Following is the patch file. It will be integrated in the future. Thanks for your bug report. --- orig\zhspacing.sty Wed Jan 02 15:29:18 2008 +++ zhspacing.sty Sat May 16 18:43:02 2009 @@ -535,2 +535,3 @@ \appendinterclasstoks{halfwidth}{\zhs@class}{\zhpunctfont} + \appendinterclasstoks{alphanum}{\zhs@class}{\zhpunctfont} } Status: Started Following is the patch file. It will be integrated in the future. Thanks for your bug report. --- orig\zhspacing.sty Wed Jan 02 15:29:18 2008 +++ zhspacing.sty Sat May 16 18:43:02 2009 @@ -535,2 +535,3 @@ \appendinterclasstoks{halfwidth}{\zhs@class}{\zhpunctfont} + \appendinterclasstoks{alphanum}{\zhs@class}{\zhpunctfont} } Status: Started May 16, 2009 issue 13 (使用zhmath后，数学环境中的全角符号的问题) commented on by luoq08 - Thanks,it works Thanks,it works May 16, 2009 issue 13 (使用zhmath后，数学环境中的全角符号的问题) Status changed by yindian - Hi. Using fullwidth punctuation in formula is not expected and to be avoided. There is currently no plan to add display support for fullwidth punctuations in future version. If you insist on using them, please add the following in the preamble. \makeatletter \zhmath@setXeTeXmathcodefam{"FF01}{"FF60}{\symhanzi} \makeatother Status: Accepted Hi. Using fullwidth punctuation in formula is not expected and to be avoided. There is currently no plan to add display support for fullwidth punctuations in future version. If you insist on using them, please add the following in the preamble. \makeatletter \zhmath@setXeTeXmathcodefam{"FF01}{"FF60}{\symhanzi} \makeatother Status: Accepted May 13, 2009 issue 13 (使用zhmath后，数学环境中的全角符号的问题) commented on by luoq08 - 不好意思，上面的tex传错了。不好意思，上面的tex传错了。 May 13, 2009 issue 13 (使用zhmath后，数学环境中的全角符号的问题) reported by luoq08 - 使用zhmath后，一些中文全角标点在数学环境中不能显示，只是空白。如，（）附件中为一个例子。使用xelatex编译使用zhmath后，一些中文全角标点在数学环境中不能显示，只是空白。如，（）附件中为一个例子。使用xelatex编译 Apr 22, 2009 issue 5 (If no SimSun in my linux system, then ......) commented on by owtgnaw - 如果使用 xetex (不是xelatex!) 把 \newfontfamily\zhfont="AR PL UMing CN" 放在 \input zhspacing.sty 前面也会报错 ! Undefined control sequence 而是要在 \input zhspacing.sty 前面使用 \font\zhfont="AR PL UMing CN"= at 10pt \font\zhpunctfont="AR PL UMing CN" at 10pt 才能代替 zhspacing.sty 里默认的设置如果使用 xetex (不是xelatex!) 把 \newfontfamily\zhfont="AR PL UMing CN" 放在 \input zhspacing.sty 前面也会报错 ! Undefined control sequence 而是要在 \input zhspacing.sty 前面使用 \font\zhfont="AR PL UMing CN"= at 10pt \font\zhpunctfont="AR PL UMing CN" at 10pt 才能代替 zhspacing.sty 里默认的设置 Feb 10, 2009 issue 12 (我有一个请求) Status changed by yindian - 精力有限，好久没有维护zhspacing了。委实抱歉。我会抽空做zhspacing2。将来会采用BSD license发布。 Status: Accepted 精力有限，好久没有维护zhspacing了。委实抱歉。我会抽空做zhspacing2。将来会采用BSD license发布。 Status: Accepted Feb 10, 2009 issue 12 (我有一个请求) commented on by yindian - 没问题:) 没问题:) Feb 10, 2009 issue 10 (默认的SimSun字体) changed by yindian - Status: Duplicate Status: Duplicate Feb 10, 2009 issue 5 (If no SimSun in my linux system, then ......) commented on by yindian - Issue 10 has been merged into this issue. Issue 10 has been merged into this issue. Feb 10, 2009 issue 5 (If no SimSun in my linux system, then ......) Status changed by yindian - Status: Accepted Status: Accepted Feb 10, 2009 issue 9 (建议) Status changed by yindian - Status: Accepted Status: Accepted Feb 10, 2009 issue 8 (建议) Status changed by yindian - Status: Invalid Status: Invalid Feb 09, 2009 issue 12 (我有一个请求) reported by KaiYanNju - 请看：http://code.google.com/p/open-chinese-xelatex/ 我是其所有人。这是基于zhspacing的一个项目。虽然是GPL开源，总觉得过意不去。我们只是旨在打包，简化各个发行版的安装过程。暂时没有什么能力来参与zhspacing 开发。如果您能容忍我们的行为，那么对我们最好。如果您不能容忍，那么我们立即撤销这个项目。但是请让我们成为您项目的一员，为我们喜爱的字体和系统打包。谢谢。请看：http://code.google.com/p/open-chinese-xelatex/ 我是其所有人。这是基于zhspacing的一个项目。虽然是GPL开源，总觉得过意不去。我们只是旨在打包，简化各个发行版的安装过程。暂时没有什么能力来参与zhspacing 开发。如果您能容忍我们的行为，那么对我们最好。如果您不能容忍，那么我们立即撤销这个项目。但是请让我们成为您项目的一员，为我们喜爱的字体和系统打包。谢谢。 Older Dec 09, 2008 issue 9 (建议) commented on by burwoad - 对啊，好歹贴个中文的手册出来。不然这给谁用啊对啊，好歹贴个中文的手册出来。不然这给谁用啊 Nov 25, 2008 issue 10 (默认的SimSun字体) reported by mgcgogo - zhspacing中有关于simsun/simhei/方正字体的一些设定。建议不要使用默认的simsun/simhei/方正字体，应该按照使用者的设定来。 zhspacing中有关于simsun/simhei/方正字体的一些设定。建议不要使用默认的simsun/simhei/方正字体，应该按照使用者的设定来。 Nov 24, 2008 issue 9 (建议) reported by mgcgogo - 你这个包是专门为中文排版设计的，可是你的使用手册之类的东西为什么是英文的？我认为至少要先有中文的再有英文的才对啊。你这个包是专门为中文排版设计的，可是你的使用手册之类的东西为什么是英文的？我认为至少要先有中文的再有英文的才对啊。 Nov 24, 2008 issue 8 (建议) reported by mgcgogo - What steps will reproduce the problem? 1. 2. 3. What is the expected output? What do you see instead? What version of the product are you using? On what operating system? Please provide any additional information below. What steps will reproduce the problem? 1. 2. 3. What is the expected output? What do you see instead? What version of the product are you using? On what operating system? Please provide any additional information below. Nov 14, 2008 issue 7 (Chinese Left "（" on the first char is wrong font. ) reported by fregister - What steps will reproduce the problem? 1. test.tex \documentclass[a4paper,11pt]{article} \usepackage{fontspec} \newfontfamily\zhfont[BoldFont=Adobe Heiti Std,ItalicFont=Adobe Kaiti Std]{Adobe Song Std} \newfontfamily\zhpunctfont{Adobe Song Std} \newcommand{\pozhehao}{\kern0.5ex\rule[.2\baselineskip]{1.5em}{.4pt}\kern0.5ex} \usepackage{color} \usepackage{indentfirst} \setlength{\parindent}{2em} \usepackage{zhspacing} \begin{document} \zhspacing \section{zhspacing 排版中的问题} \textit{（1）中文括号（1）文中} \textit{(1) 英文括号(1)文中} \textbf {（1）中文括号（1）文中 } \textbf {(1)英文括号(1) 文中 } \end{document} 2. xelatex test.tex What is the expected output? What do you see instead? From the pdf file, I can find the Chinese left "(" and right ")" are not in the same font. What version of the product are you using? On what operating system? The zhspacing-080102-r4 Please provide any additional information below. What steps will reproduce the problem? 1. test.tex \documentclass[a4paper,11pt]{article} \usepackage{fontspec} \newfontfamily\zhfont[BoldFont=Adobe Heiti Std,ItalicFont=Adobe Kaiti Std]{Adobe Song Std} \newfontfamily\zhpunctfont{Adobe Song Std} \newcommand{\pozhehao}{\kern0.5ex\rule[.2\baselineskip]{1.5em}{.4pt}\kern0.5ex} \usepackage{color} \usepackage{indentfirst} \setlength{\parindent}{2em} \usepackage{zhspacing} \begin{document} \zhspacing \section{zhspacing 排版中的问题} \textit{（1）中文括号（1）文中} \textit{(1) 英文括号(1)文中} \textbf {（1）中文括号（1）文中 } \textbf {(1)英文括号(1) 文中 } \end{document} 2. xelatex test.tex What is the expected output? What do you see instead? From the pdf file, I can find the Chinese left "(" and right ")" are not in the same font. What version of the product are you using? On what operating system? The zhspacing-080102-r4 Please provide any additional information below. Sep 15, 2008 issue 6 (zhfont can not working with unicode-math properly) commented on by acevery - Thank you for your response. I found that putting \def\lq{`}\def\rq{'} in preamble is not working as expected, and it needed to be put in document environment. I put it just before \zhspacing and it works fine :) Thank you for your response. I found that putting \def\lq{`}\def\rq{'} in preamble is not working as expected, and it needed to be put in document environment. I put it just before \zhspacing and it works fine :) Sep 15, 2008 issue 6 (zhfont can not working with unicode-math properly) Status changed by yindian - Yes, the problem is reproduced. Investigation shows that it is because unicode-math redefines \lq, which should be the ASCII left quote “`” and is used in zhspacing's \chartonum to convert character to number, but unicode-math has changed it to the CJK ambiguous left single quote “‘”. A temporary solution is to put \def\lq{`}\def\rq{'} in the preamble. It will be formally fixed in the next version (however no time warranty when to release :). Thanks for your submission. Status: Accepted Yes, the problem is reproduced. Investigation shows that it is because unicode-math redefines \lq, which should be the ASCII left quote “`” and is used in zhspacing's \chartonum to convert character to number, but unicode-math has changed it to the CJK ambiguous left single quote “‘”. A temporary solution is to put \def\lq{`}\def\rq{'} in the preamble. It will be formally fixed in the next version (however no time warranty when to release :). Thanks for your submission. Status: Accepted Sep 05, 2008 issue 6 (zhfont can not working with unicode-math properly) commented on by acevery - sorry should be zhspacing, not only zhfont sorry should be zhspacing, not only zhfont Sep 05, 2008 issue 6 (zhfont can not working with unicode-math properly) reported by acevery - What steps will reproduce the problem? 1. use zhfont and unicode-math, no matter which load first 2. \zhspacing in document environment 3. use any thing like "中文some words \n continue words" in document environment. 4. get error: ! Missing number, treated as zero. <to be read again> \XeTeXdelimiter l.104 落在世人的屋顶上，落在死者的坟墓上！在一片白... ? X What is the expected output? What do you see instead? process normally What version of the product are you using? On what operating system? 20080102 Please provide any additional information below. without zhspacing, unicode-math not cause this problem. without unicode-math, zhspaing not cause this problem. unicode-math: using math font in xelatex. What steps will reproduce the problem? 1. use zhfont and unicode-math, no matter which load first 2. \zhspacing in document environment 3. use any thing like "中文some words \n continue words" in document environment. 4. get error: ! Missing number, treated as zero. <to be read again> \XeTeXdelimiter l.104 落在世人的屋顶上，落在死者的坟墓上！在一片白... ? X What is the expected output? What do you see instead? process normally What version of the product are you using? On what operating system? 20080102 Please provide any additional information below. without zhspacing, unicode-math not cause this problem. without unicode-math, zhspaing not cause this problem. unicode-math: using math font in xelatex. Aug 24, 2008 r47 (update) committed by yindian - update update Aug 17, 2008 r46 (Check in new working branch.) committed by yindian - Check in new working branch. Check in new working branch.

issue 7 (Chinese Left "（" on the first char is wrong font. ) reported by fregister - What steps will reproduce the problem? 1. test.tex \documentclass[a4paper,11pt]{article} \usepackage{fontspec} \newfontfamily\zhfont[BoldFont=Adobe Heiti Std,ItalicFont=Adobe Kaiti Std]{Adobe Song Std} \newfontfamily\zhpunctfont{Adobe Song Std} \newcommand{\pozhehao}{\kern0.5ex\rule[.2\baselineskip]{1.5em}{.4pt}\kern0.5ex} \usepackage{color} \usepackage{indentfirst} \setlength{\parindent}{2em} \usepackage{zhspacing} \begin{document} \zhspacing \section{zhspacing 排版中的问题} \textit{（1）中文括号（1）文中} \textit{(1) 英文括号(1)文中} \textbf {（1）中文括号（1）文中 } \textbf {(1)英文括号(1) 文中 } \end{document} 2. xelatex test.tex What is the expected output? What do you see instead? From the pdf file, I can find the Chinese left "(" and right ")" are not in the same font. What version of the product are you using? On what operating system? The zhspacing-080102-r4 Please provide any additional information below.

What steps will reproduce the problem? 1. test.tex \documentclass[a4paper,11pt]{article} \usepackage{fontspec} \newfontfamily\zhfont[BoldFont=Adobe Heiti Std,ItalicFont=Adobe Kaiti Std]{Adobe Song Std} \newfontfamily\zhpunctfont{Adobe Song Std} \newcommand{\pozhehao}{\kern0.5ex\rule[.2\baselineskip]{1.5em}{.4pt}\kern0.5ex} \usepackage{color} \usepackage{indentfirst} \setlength{\parindent}{2em} \usepackage{zhspacing} \begin{document} \zhspacing \section{zhspacing 排版中的问题} \textit{（1）中文括号（1）文中} \textit{(1) 英文括号(1)文中} \textbf {（1）中文括号（1）文中 } \textbf {(1)英文括号(1) 文中 } \end{document} 2. xelatex test.tex What is the expected output? What do you see instead? From the pdf file, I can find the Chinese left "(" and right ")" are not in the same font. What version of the product are you using? On what operating system? The zhspacing-080102-r4 Please provide any additional information below.

Earlier this year

Older