1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224

# Copyright:	Public domain.
# Filename:	INPUT_OUTPUT_CHANNEL_BIT_DESCRIPTIONS.agc
# Purpose: 	Part of the source code for Luminary 1A build 099.
#		It is part of the source code for the Lunar Module's (LM)
#		Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:	yaYUL
# Contact:	Onno Hommes <ohommes@cmu.edu>.
# Website:	www.ibiblio.org/apollo.
# Pages:	0054-0060
# Mod history:	2009-05-14 OH	Transcribed from page images.
#
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum.  The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum.  Many thanks to both.  The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo.  If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
#	Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
#	16:27 JULY 14, 1969 

# Page 54

# *** CHANNEL DESCRIPTION WORDS ARE ALLOCATED IN ERASABLE ASSIGNMENTS ***

# CHANNEL 1	IDENTICAL TO COMPUTER REGISTER L (0001)

# CHANNEL 2	IDENTICAL TO COMPUTER REGISTER Q (0002)

# CHANNEL 3	HISCALAR: INPUT CHANNEL; MOST SIGNIFICANT 14 BITS FROM 33 STAGE BINARY COUNTER. SCALE
#		FACTOR IS B23 IN CSEC, SO MAX VALUE ABOUT 23.3 HOURS AND LEAST SIGNIFICANT BIT 5.12 SECS.

# CHANNEL 4	LOSCALAR: INPUT CHANNEL; NEXT MOST SIGNIFICANT 14 BITS FROM THE 33 STAGE BINARY COUNTER
#		ASSOCIATED WITH CHANNEL 3. SCALE FACTOR IS B9 IN CSEC. SO MAX VAL IS 5.12 SEC AND LEAST
#		SIGNIFICANT BIT IS 1/3200 SEC. SCALE FACTOR OF D.P. WORD WITH CHANNEL 3 IS B23 CSEC.

# CHANNEL 5	PYJETS:  OUTPUT CHANNEL; PITCH RCS JET CONTROL.  (REACTION CONTROL SYSTEM) USES BITS 1-8.

# CHANNEL 6	ROLLJETS: OUTPUT CHANNEL; ROLL RCS JET CONTROL.  (REACTION CONTROL SYSTEM) USES BIT 1-8.

# CHANNEL 7	SUPERBNK: OUTPUT CHANNEL; NOT RESET BY RESTART; FIXED EXTENSION BITS USED TO SELECT THE
#		APPROPRIATE FIXED MEMORY BANK IF FBANK IS 30 OCTAL OR MORE.  USES BITS 5-7.

# CHANNEL 10	OUT0: OUTPUT CHANNEL; REGISTER USED TO TRANSMIT LATCHING-RELAY DRIVING INFORMATION FOR
#		THE DISPLAY SYSTEM.  BITS 15-12 ARE SET TO THE ROW NUMBER (1-14 OCTAL) OF THE RELAY TO BE
#		CHANGED AND BITS 11-1 CONTAIN THE REQUIRED SETTINGS FOR THE RELAYS IN THE ROW.

# CHANNEL 11	DSALMOUT: OUTPUT CHANNEL; REGISTER WHOSE BITS ARE USED FOR ENGINE ON-OFF CONTROL AND TO
#		DRIVE INDIVIDUAL INDICATORS OF THE DISPLAY SYSTEM.  BITS 1-7 ARE A RELAYS.
#
#		BIT 1		ISS WARNING
#		BIT 2		LIGHT COMPUTER ACTIVITY LAMP
#		BIT 3		LIGHT UPLINK ACTIVITY LAMP
#		BIT 4		LIGHT TEMP CAUTION LAMP
#		BIT 5		LIGHT KEYBOARD RELEASE LAMP
#		BIT 6		FLASH VERB AND NOUN LAMPS
#		BIT 7		LIGHT OPERATOR ERROR LAMP
# Page 55
#		BIT 8		SPARE
#		BIT 9		TEST CONNECTOR OUTBIT
#		BIT 10		CAUTION RESET
#		BIT 11		SPARE
#		BIT 12		SPARE
#		BIT 13		ENGINE ON
#		BIT 14		ENGINE OFF
#		BIT 15		SPARE

# CHANNEL 12	CHAN12: OUTPUT CHANNEL; BITS USED TO DRIVE NAVIGATION AND SPACECRAFT HARDWARE.
#
#		BIT 1		ZERO RR CDU; CDU'S GIVE RRADAR INFORMATION FOR LM
#		BIT 2		ENABLE CDU RADAR ERROR COUNTERS
#		BIT 3		NOT USED
#		BIT 4		COARSE ALIGN ENABLE OF IMU
#		BIT 5		ZERO IMU CDU'S
#		BIT 6		ENABLE IMU ERROR COUNTER, CDU ERROR COUNTER.
#		BIT 7		SPARE
#		BIT 8		DISPLAY INERTIAL DATA
#		BIT 9		-PITCH GIMBAL TRIM (BELL MOTION) DESCENT ENGINE
#		BIT 10		+PITCH GIMBAL TRIM (BELL MOTION) DESCENT ENGINE
#		BIT 11		-ROLL GIMBAL TRIM (BELL MOTION) DESCENT ENGINE
#		BIT 12		+ROLL GIMBAL TRIM (BELL MOTION) DESCENT ENGINE
#		BIT 13		LR POSITION 2 COMMAND
#		BIT 14		ENABLE RENDEZVOUS RADAR LOCK-ON; AUTO ANGLE TRACK'G
#		BIT 15		ISS TURN ON DELAY COMPLETE

# Page 56
# CHANNEL 13	CHAN13: OUTPUT CHANNEL.
#
#		BIT 1		RADAR C		PROPER SETTING OF THE A,B,C MATRIX
#		BIT 2		RADAR B		SELECTS CERTAIN RADAR
#		BIT 3		RADAR A		PARAMETERS TO BE READ.
#		BIT 4		RADAR ACTIVITY
#		BIT 5		NOT USED (CONNECTS AN ALTERNATE INPUT TO UPLINK)
#		BIT 6		BLOCK INPUTS TO UPLINK CELL
#		BIT 7		DOWNLINK TELEMETRY WORD ORDER CODE BIT
#		BIT 8		RHC COUNTER ENABLE (READ HAND CONTROLLER ANGLES)
#		BIT 9		START RHC READ INTO COUNTERS IS BIT 8 SET
#		BIT 10		TEST ALARMS, TEST DSKY LIGHTS
#		BIT 11		ENABLE STANDBY
#		BIT 12		RESET TRAP 31-A		ALWAYS APPEAR TO BE SET TO 0
#		BIT 13		RESET TRAP 31-B		ALWAYS APPEAR TO BE SET TO 0
#		BIT 14		RESET TRAP 32		ALWAYS APPEAR TO BE SET TO 0
#		BIT 15		ENABLE T6 RUPT

# CHANNEL 14	CHAN14: OUTPUT CHANNEL; USED TO CONTROL COMPUTER COUNTER CELLS (CDU, GYRO, SPACECRAFT FUNC).
#
#		BIT 1		OUTLINK ACTIVITY (NOT USED)
#		BIT 2		ALTITUDE RATE OR ALTITUDE SELECTOR
#		BIT 3		ALTITUDE METER ACTIVITY
#		BIT 4		THRUST DRIVE ACTIVITY FOR DESCENT ENGINE
#		BIT 5		SPARE
#		BIT 6		GYRO ENABLE POWER FOR PULSES
#		BIT 7		GYRO SELECT B		PAIR OF BITS IDENTIFIES AXIS OF
#		BIT 8		GYRO SELECT A		GYRO SYSTEM TO BE TORQUED.
#		BIT 9		GYRO TORQUING COMMAND IN NEGATIVE DIRECTION.
# Page 57
#		BIT 10		GYRO ACTIVITY
#		BIT 11		DRIVE CDU S
#		BIT 12		DRIVE CDU T
#		BIT 13		DRIVE CDU Z
#		BIT 14		DRIVE CDU Y
#		BIT 15		DRIVE CDU X

# CHANNEL 15	MNKEYIN: INPUT CHANNEL; KEY CODE INPUT FROM KEYBOARD OF DSKY, SENSED BY PROGRAM WHEN
#		PROGRAM INTERRUPT #5 IS RECEIVED.  USED BITS 5-1

# CHANNEL 16	NAVKEYIN: INPUT CHANNEL; OPTICS MARK INFORMATION AND NAVIGATION PANEL DSKY (CM) OR THRUST
#		CONTROL (LM) SENSED BY PROGRAM THEN PROGRAM INTERRUPT #6 IS RECEIVED.  USES BITS 3-7 ONLY.
#
#		BIT 1		NOT ASSIGNED
#		BIT 2		NOT ASSIGNED
#		BIT 3		OPTICS X-AXIS MARK SIGNAL FOR ALIGN OPTICAL TSCOPE
#		BIT 4		OPTICS Y-AXIS MARK SIGNAL FOR AOT
#		BIT 5		OPTICS MARK REJECT SIGNAL
#		BIT 6		DESCENT+ ; CREW DESIRED SLOWING RATE OF DESCENT
#		BIT 7		DESCENT- ; CREW DESIRED SPEEDING UP RATE OF D'CENT

# NOTE: ALL BITS IN CHANNELS 30-33 ARE INVERTED AS SENSED BY THE PROGRAM, SO THAT A VALUE OF ZERO MEANS
# THAT THE INDICATED SIGNAL IS PRESENT.

# CHANNEL 30	INPUT CHANNEL
#
#		BIT 1		ABORT WITH DESCENT STAGE
#		BIT 2		UNUSED
#		BIT 3		ENGINE ARMED SIGNAL
#		BIT 4		ABORT WITH ASCENT ENGINE STAGE
#		BIT 5		AUTO THROTTLE; COMPUTER CONTROL OF DESCENT ENGINE
# Page 58
#		BIT 6		DISPLAY INERTIAL DATA
#		BIT 7		RR CDU FAIL
#		BIT 8		SPARE
#		BIT 9		IMU OPERATE WITH NO MALFUNCTION
#		BIT 10		LM COMPUTER (NOT AGS) HAS CONTROL OF LM.
#		BIT 11		IMU CAGE COMMAND TO DRIVE IMU GIMBAL ANGLES TO 0.
#		BIT 12		IMU CDU FAIL (MALFUNCTION OF IMU CDU,S)
#		BIT 13		IMU FAIL (MALFUCTION OF IMU STABILIZATION LOOPS)
#		BIT 14		ISS TURN ON REQUESTED
#		BIT 15		TEMPERATURE OF STABLE MEMBER WITHIN DESIGN LIMITS

# CHANNEL 31	INPUT CHANNEL; BITS ASSOCIATED WITH THE ATTITUDE CONTROLLER, TRANSLATIONAL CONTROLLER,
#		AND SPACECRAFT ATTITUDE CONTROL; USED BY RCS DAP.
#
#		BIT 1		ROTATION (BY RHC) COMMANDED IN POSITIVE PITCH DIRECTION; MUST BE IN MINIMUM IMPULSE MODE.
#				ALSO POSITIVE ELEVATION CHANGE FOR LANDING POINT DESIGNATOR
#		BIT 2		AS BIT 1 EXCEPT NEGATIVE PITCH AND ELEVATION.
#		BIT 3		ROTATION (BY RHC) COMMANDED IN POSITIVE YAW DIRECTION; MUST BE IN MINIMUM IMPULSE MODE.
#		BIT 4		AS BIT 3 EXCEPT NEGATIVE YAW
#		BIT 5		ROTATION (BY RHC) COMMANDED IN POSITIVE ROLL DIRECTION; MUST BE IN MINIMUM IMPULSE MODE.
#				ALSO POSITIVE AZIMUTH CHANGE FOR LANDING POINT DESIGNATOR.
#		BIT 6		AS BIT 5 EXCEPT NEGATIVE ROLL AND AZIMUTH
#		BIT 7		TRANSLATION IN +X DIRECTION COMMANDED BY THC
#		BIT 8		TRANSLATION IN -X DIRECTION COMMANDED BY THC
#		BIT 9		TRANSLATION IN +Y DIRECTION COMMANDED BY THC
#		BIT 10		TRANSLATION IN -Y DIRECTION COMMANDED BY THC
#		BIT 11		TRANSLATION IN +Z DIRECTION COMMANDED BY THC
#		BIT 12		TRANSLATION IN -Z DIRECTION COMMANDED BY THC
# Page 59
#		BIT 13		ATTITUDE HOLD MODE ON SCS MODE CONTROL SWITCH
#		BIT 14		AUTO STABILIZATION OF ATTITUDE ON SCS MODE SWITCH
#		BIT 15		ATTITUDE CONTROL OUT OF DETENT (RHC NOT IN NEUTRAL)

# CHANNEL 32	INPUT CHANNEL.
#
#		BIT 1		THRUSTERS 2 & 4 DISABLED BY CREW
#		BIT 2		THRUSTERS 5 & 8 DISABLED BY CREW
#		BIT 3		THRUSTERS 1 & 3 DISABLED BY CREW
#		BIT 4		THRUSTERS 6 & 7 DISABLED BY CREW
#		BIT 5		THRUSTERS 14 & 16 DISABLED BY CREW
#		BIT 6		THRUSTERS 13 & 15 DISABLED BY CREW
#		BIT 7		THRUSTERS 9 & 12 DISABLED BY CREW
#		BIT 8		THRUSTERS 10 & 11 DISABLED BY CREW
#		BIT 9		DESCENT ENGINE DISABLED BY CREW
#		BIT 10		APPARENT DESCENT ENGINE GIMBAL FAILURE
#		BIT 14		INDICATES PROCEED KEY IS DEPRESSED

# CHANNEL 33	CHAN33: INPUT CHANNEL; FOR HARDWARE STATUS AND COMMAND INFORMATION.  BITS 15-11 ARE FLIP-
#		FLOP BITS RESET BY A CHANNEL "WRITE" COMMAND THAT ARE RESET BY A RESTART & BY T4RUPT LOOP.
#
#		BIT 1		SPARE
#		BIT 2		RR AUTO-POWER ON
#		BIT 3		RR RANGE LOW SCALE
#		BIT 4		RR DATA GOOD
#		BIT 5		LR RANGE DATA GOOD
#		BIT 6		LR POS1
#		BIT 7		LR POS2
# Page 60
#		BIT 8		LR VEL DATA GOOD
#		BIT 9		LR RANGE LOW SCALE
#		BIT 10		BLOCK UPLINK INPUT
#		BIT 11		UPLINK TOO FAST
#		BIT 12		DOWNLINK TOO FAST
#		BIT 13		PIPA FAIL
#		BIT 14		WARNING OF REPEATED ALARMS: RESTART, COUNTER FAIL, VOLTAGE FAIL, AND SCALAR DOUBLE.
#		BIT 15		LGC OSCILLATOR STOPPED

# CHANNEL 34	DNT M1: OUTPUT CHANNEL; DOWNLINK 1: FIRST OF TWO WORDS SERIALIZATION.
# CHANNEL 35	DNT M2: OUTPUT CHANNEL; DOWNLINK 2: SECOND OF TWO WORDS SERIALIZATION.