My favorites | Sign in
Project Home Downloads Wiki Issues Source
A brief tutorial for new Thrust developers
Phase-Deploy, Featured
Updated Dec 28, 2011 by jaredhoberock


Thrust is a C++ template library for CUDA based on the Standard Template Library (STL). Thrust allows you to implement high performance parallel applications with minimal programming effort through a high-level interface that is fully interoperable with CUDA C.

Thrust provides a rich collection of data parallel primitives such as scan, sort, and reduce, which can be composed together to implement complex algorithms with concise, readable source code. By describing your computation in terms of these high-level abstractions you provide Thrust with the freedom to select the most efficient implementation automatically. As a result, Thrust can be utilized in rapid prototyping of CUDA applications, where programmer productivity matters most, as well as in production, where robustness and absolute performance are crucial.

This document describes how to develop CUDA applications with Thrust. The tutorial is intended to be accessible, even if you have limited C++ or CUDA experience.


Thrust v1.5.0 is compatible with CUDA 4.1 (preferred) and CUDA 4.0. You can confirm that CUDA is installed by running nvcc --version on the command line. For example on a Linux system,

$ nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2011 NVIDIA Corporation
Built on Fri_Mar_25_16:22:02_CDT_2011
Cuda compilation tools, release 4.0, V0.2.1221

outputs the compiler version information.

If you are using CUDA 4.0 or better then Thrust is already installed on your system and you can safely skip to the next section.

Since Thrust is a C++ template library there is nothing to "build". Simply download the newest version from the Downloads section and extract the contents of the zip file to a directory. We suggest installing Thrust to the CUDA include directory, which is usually

  • /usr/local/cuda/include/ on a Linux and Mac OSX
  • C:\CUDA\include\ on a Windows system

If you are unable to install Thrust to the CUDA include directory, then you can place Thrust somewhere in your home directory, for example: /home/nathan/cuda_libraries/.

Warning: Do not install Thrust to a standard include path like /usr/local/include/. It appears that nvcc treats such paths differently than the suggestions above which causes errors like error: expected primary-expression before ‘<’ token.

Simple Example

Let's compile a simple program with Thrust to make sure all the prerequisites are satisfied. Save the following source code to a file named

#include <thrust/version.h>
#include <iostream>

int main(void)
    int major = THRUST_MAJOR_VERSION;
    int minor = THRUST_MINOR_VERSION;

    std::cout << "Thrust v" << major << "." << minor << std::endl;

    return 0;

Now compile with nvcc. If Thrust was installed to the CUDA include directory then the following commands should work.

$ ls
$ nvcc -o version
$ ls
thrust  version
$ ./version
Thrust v1.5

If the thrust directory is placed somewhere else, use the -I option to tell nvcc where to look. For example, if thrust was placed in /home/nathan/cuda_libraries/ then the following command should be used.

$ nvcc -o version -I /home/nathan/cuda_libraries/


Thrust provides two vector containers, host_vector and device_vector. As the names suggest, host_vector is stored in host memory while device_vector lives in GPU device memory. Thrust's vector containers are just like std::vector in the C++ STL. Like std::vector, host_vector and device_vector are generic containers (able to store any data type) that can be resized dynamically. The following source code illustrates the use of Thrust's vector containers.

#include <thrust/host_vector.h>
#include <thrust/device_vector.h>

#include <iostream>

int main(void)
    // H has storage for 4 integers
    thrust::host_vector<int> H(4);

    // initialize individual elements
    H[0] = 14;
    H[1] = 20;
    H[2] = 38;
    H[3] = 46;
    // H.size() returns the size of vector H
    std::cout << "H has size " << H.size() << std::endl;

    // print contents of H
    for(int i = 0; i < H.size(); i++)
        std::cout << "H[" << i << "] = " << H[i] << std::endl;

    // resize H
    std::cout << "H now has size " << H.size() << std::endl;

    // Copy host_vector H to device_vector D
    thrust::device_vector<int> D = H;
    // elements of D can be modified
    D[0] = 99;
    D[1] = 88;
    // print contents of D
    for(int i = 0; i < D.size(); i++)
        std::cout << "D[" << i << "] = " << D[i] << std::endl;

    // H and D are automatically deleted when the function returns
    return 0;

As this example shows, the = operator can be used to copy a host_vector to a device_vector (or vice-versa). The = operator can also be used to copy host_vector to host_vector or device_vector to device_vector. Also note that individual elements of a device_vector can be accessed using the standard bracket notation. However, because each of these accesses requires a call to cudaMemcpy, they should be used sparingly. We'll look at some more efficient techniques later.

It's often useful to initialize all the elements of a vector to a specific value, or to copy only a certain set of values from one vector to another. Thrust provides a few ways to do these kinds of operations.

#include <thrust/host_vector.h>
#include <thrust/device_vector.h>

#include <thrust/copy.h>
#include <thrust/fill.h>
#include <thrust/sequence.h>

#include <iostream>

int main(void)
    // initialize all ten integers of a device_vector to 1
    thrust::device_vector<int> D(10, 1);

    // set the first seven elements of a vector to 9
    thrust::fill(D.begin(), D.begin() + 7, 9);

    // initialize a host_vector with the first five elements of D
    thrust::host_vector<int> H(D.begin(), D.begin() + 5);

    // set the elements of H to 0, 1, 2, 3, ...
    thrust::sequence(H.begin(), H.end());

    // copy all of H back to the beginning of D
    thrust::copy(H.begin(), H.end(), D.begin());

    // print D
    for(int i = 0; i < D.size(); i++)
        std::cout << "D[" << i << "] = " << D[i] << std::endl;

    return 0;

Here we've illustrated use of the fill, copy, and sequence functions. The copy function can be used to copy a range of host or device elements to another host or device vector. Like the corresponding STL function, thrust::fill simply sets a range of elements to a specific value. Thrust's sequence function can be used to a create a sequence of equally spaced values.

Thrust Namespace

You'll notice that we use things like thrust::host_vector or thrust::copy in our examples. The thrust:: part tells the C++ compiler that we want to look inside the thrust namespace for a specific function or class. Namespaces are a nice way to avoid name collisions. For instance, thrust::copy is different from std::copy provided in the STL. C++ namespaces allow us to distinguish between these two copy functions.

Iterators and Static Dispatching

In this section we used expressions like H.begin() and H.end() or offsets like D.begin() + 7. The result of begin() and end() is called an iterator in C++. In the case of vector containers, which are really just arrays, iterators can be thought of as pointers to array elements. Therefore, H.begin() is an iterator that points to the first element of the array stored inside the H vector. Similarly, H.end() points to the element one past the last element of the H vector.

Although vector iterators are similar to pointers they carry more information with them. Notice that we did not have to tell thrust::fill that it was operating on a device_vector iterator. This information is captured in the type of the iterator returned by D.begin() which is different than the type returned by H.begin(). When a Thrust function is called, it inspects the type of the iterator to determine whether to use a host or a device implementation. This process is known as static dispatching since the host/device dispatch is resolved at compile time. Note that this implies that there is no runtime overhead to the dispatch process.

You may wonder what happens when a "raw" pointer is used as an argument to a Thrust function. Like the STL, Thrust permits this usage and it will dispatch the host path of the algorithm. If the pointer in question is in fact a pointer to device memory then you'll need to wrap it with thrust::device_ptr before calling the function. For example:

size_t N = 10;

// raw pointer to device memory
int * raw_ptr;
cudaMalloc((void **) &raw_ptr, N * sizeof(int));

// wrap raw pointer with a device_ptr 
thrust::device_ptr<int> dev_ptr(raw_ptr);

// use device_ptr in thrust algorithms
thrust::fill(dev_ptr, dev_ptr + N, (int) 0);

To extract a raw pointer from a device_ptr the raw_pointer_cast should be applied as follows:

size_t N = 10;

// create a device_ptr 
thrust::device_ptr<int> dev_ptr = thrust::device_malloc<int>(N);
// extract raw pointer from device_ptr
int * raw_ptr = thrust::raw_pointer_cast(dev_ptr);

Another reason to distinguish between iterators and pointers is that iterators can be used to traverse many kinds of data structures. For example, the STL provides a linked list container (std::list) that provides bidirectional (but not random access) iterators. Although Thrust does not provide device implementations of such containers, it is compatible with them.

#include <thrust/device_vector.h>
#include <thrust/copy.h>
#include <list>
#include <vector>

int main(void)
    // create an STL list with 4 values
    std::list<int> stl_list;


    // initialize a device_vector with the list
    thrust::device_vector<int> D(stl_list.begin(), stl_list.end());

    // copy a device_vector into an STL vector
    std::vector<int> stl_vector(D.size());
    thrust::copy(D.begin(), D.end(), stl_vector.begin());

    return 0;

For Future Reference: The iterators we've covered so far are useful, but fairly basic. In addition to these normal iterators, Thrust also provides a collection of fancy iterators with names like counting_iterator and zip_iterator. While they look and feel like normal iterators, fancy iterators are capable of more exciting things. We'll revisit this topic later in the tutorial.


Thrust provides a large number of common parallel algorithms. Many of these algorithms have direct analogs in the STL, and when an equivalent STL function exists, we choose the name (e.g. thrust::sort and std::sort).

All algorithms in Thrust have implementations for both host and device. Specifically, when a Thrust algorithm is invoked with a host iterator, then the host path is dispatched. Similarly, a device implementation is called when a device iterator is used to define a range.

With the exception of thrust::copy, which can copy data between host and device, all iterator arguments to a Thrust algorithm should live in the same place: either all on the host or all on the device. When this requirement is violated the compiler will produce an error message.


Transformations are algorithms that apply an operation to each element in a set of (zero or more) input ranges and then stores the result in a destination range. One example we have already seen is thrust::fill, which sets all elements of a range to a specified value. Other transformations include thrust::sequence, thrust::replace, and of course thrust::transform. Refer to the documentation for a complete listing.

The following source code demonstrates several of the transformation algorithms. Note that thrust::negate and thrust::modulus are known as functors in C++ terminology. Thrust provides these and other common functors like plus and multiplies in the file thrust/functional.h.

#include <thrust/device_vector.h>
#include <thrust/transform.h>
#include <thrust/sequence.h>
#include <thrust/copy.h>
#include <thrust/fill.h>
#include <thrust/replace.h>
#include <thrust/functional.h>
#include <iostream>

int main(void)
    // allocate three device_vectors with 10 elements
    thrust::device_vector<int> X(10);
    thrust::device_vector<int> Y(10);
    thrust::device_vector<int> Z(10);

    // initialize X to 0,1,2,3, ....
    thrust::sequence(X.begin(), X.end());

    // compute Y = -X
    thrust::transform(X.begin(), X.end(), Y.begin(), thrust::negate<int>());

    // fill Z with twos
    thrust::fill(Z.begin(), Z.end(), 2);

    // compute Y = X mod 2
    thrust::transform(X.begin(), X.end(), Z.begin(), Y.begin(), thrust::modulus<int>());

    // replace all the ones in Y with tens
    thrust::replace(Y.begin(), Y.end(), 1, 10);

    // print Y
    thrust::copy(Y.begin(), Y.end(), std::ostream_iterator<int>(std::cout, "\n"));
    return 0;    

While the functors in thrust/functional.h cover most of the built-in arithmetic and comparison operations, we often want to do something different. For example, consider the vector operation y <- a * x + y where x and y are vectors and a is a scalar constant. This is the well-known SAXPY operation provided by any BLAS library.

If we want to implement SAXPY with Thrust we have a few options. The first is to use two transformations (one addition and one multiplication) and a temporary vector filled with the value a. A better choice is to use a single transformation with a user-defined functor that does exactly what we want. We illustrate both approaches in the source code below.

struct saxpy_functor
    const float a;

    saxpy_functor(float _a) : a(_a) {}

    __host__ __device__
        float operator()(const float& x, const float& y) const { 
            return a * x + y;

void saxpy_fast(float A, thrust::device_vector<float>& X, thrust::device_vector<float>& Y)
    // Y <- A * X + Y
    thrust::transform(X.begin(), X.end(), Y.begin(), Y.begin(), saxpy_functor(A));

void saxpy_slow(float A, thrust::device_vector<float>& X, thrust::device_vector<float>& Y)
    thrust::device_vector<float> temp(X.size());
    // temp <- A
    thrust::fill(temp.begin(), temp.end(), A);
    // temp <- A * X
    thrust::transform(X.begin(), X.end(), temp.begin(), temp.begin(), thrust::multiplies<float>());

    // Y <- A * X + Y
    thrust::transform(temp.begin(), temp.end(), Y.begin(), Y.begin(), thrust::plus<float>());

Both saxpy_fast and saxpy_slow are valid SAXPY implementations, however saxpy_fast will be significantly faster than saxpy_slow. Ignoring the cost of allocating the temp vector and the arithmetic operations we have the following costs:

  • fast_saxpy: performs 2N reads and N writes
  • slow_saxpy: performs 4N reads and 3N writes
Since SAXPY is memory bound (its performance is limited by memory bandwidth, not floating point performance) the larger number of reads and writes makes saxpy_slow much more expensive. In contrast, saxpy_fast will perform about as fast as SAXPY in an optimized BLAS implementation. In memory bound algorithms like SAXPY it is generally worthwhile to apply kernel fusion (combining multiple operations into a single kernel) to minimize the number of memory transactions.

thrust::transform only supports transformations with one or two input arguments (e.g. f(x) -> y and f(x,y) -> z). When a transformation uses more than two input arguments it is necessary to use a different approach. The arbitrary_transformation example demonstrates a solution that uses thrust::zip_iterator and thrust::for_each.


A reduction algorithm uses a binary operation to reduce an input sequence to a single value. For example, the sum of an array of numbers is obtained by reducing the array with a plus operation. Similarly, the maximum of an array is obtained by reducing with a operator that takes two inputs and returns the maximum. The sum of an array is implemented with thrust::reduce as follows:

  int sum = thrust::reduce(D.begin(), D.end(), (int) 0, thrust::plus<int>());

The first two arguments to reduce define the range of values while the third and fourth parameters provide the initial value and reduction operator respectively. Actually, this kind of reduction is so common that it is the default choice when no initial value or operator is provided. The following three lines are therefore equivalent:

  int sum = thrust::reduce(D.begin(), D.end(), (int) 0, thrust::plus<int>());
  int sum = thrust::reduce(D.begin(), D.end(), (int) 0);
  int sum = thrust::reduce(D.begin(), D.end())

Although thrust::reduce is sufficient to implement a wide variety of reductions, Thrust provides a few additional functions for convenience (like the STL). For example, thrust::count returns the number of instances of a specific value in a given sequence:

  #include <thrust/count.h>
  #include <thrust/device_vector.h>
  // put three 1s in a device_vector
  thrust::device_vector<int> vec(5,0);
  vec[1] = 1;
  vec[3] = 1;
  vec[4] = 1;
  // count the 1s
  int result = thrust::count(vec.begin(), vec.end(), 1);
  // result is three

Other reduction operations include thrust::count_if, thrust::min_element, thrust::max_element, thrust::is_sorted, thrust::inner_product, and several others. Refer to the documentation for a complete listing.

The SAXPY example in the Transformations section showed how kernel fusion can be used to reduce the number of memory transfers used by a transformation kernel. With thrust::transform_reduce we can also apply kernel fusion to reduction kernels. Consider the following example which computes the norm of a vector.

#include <thrust/transform_reduce.h>
#include <thrust/functional.h>
#include <thrust/device_vector.h>
#include <thrust/host_vector.h>
#include <cmath>

// square<T> computes the square of a number f(x) -> x*x
template <typename T>
struct square
    __host__ __device__
        T operator()(const T& x) const { 
            return x * x;

int main(void)
    // initialize host array
    float x[4] = {1.0, 2.0, 3.0, 4.0};

    // transfer to device
    thrust::device_vector<float> d_x(x, x + 4);

    // setup arguments
    square<float>        unary_op;
    thrust::plus<float> binary_op;
    float init = 0;

    // compute norm
    float norm = std::sqrt( thrust::transform_reduce(d_x.begin(), d_x.end(), unary_op, init, binary_op) );

    std::cout << norm << std::endl;

    return 0;

Here we have a unary operator called square that squares each element of the input sequence. The sum of squares is then computed using a standard plus reduction. Like the slower version of the SAXPY transformation, we could implement norm with multiple passes: first a transform using square or perhaps just multiplies and then a plus reduction over a temporary array. However this would be unnecessarily wasteful and considerably slower. By fusing the square operation with the reduction kernel we again have a highly optimized implementation which offers the same performance as hand-written kernels.


Parallel prefix-sums, or scan operations, are important building blocks in many parallel algorithms such as stream compaction and radix sort. Consider the following source code which illustrates an inclusive scan operation using the default plus operator:

#include <thrust/scan.h>
int data[6] = {1, 0, 2, 2, 1, 3};

thrust::inclusive_scan(data, data + 6, data); // in-place scan

// data is now {1, 1, 3, 5, 6, 9}

In an inclusive scan each element of the output is the corresponding partial sum of the input range. For example, data[2] = data[0] + data[1] + data[2]. An exclusive scan is similar, but shifted by one place to the right:

#include <thrust/scan.h>
int data[6] = {1, 0, 2, 2, 1, 3};

thrust::exclusive_scan(data, data + 6, data); // in-place scan

// data is now {0, 1, 1, 3, 5, 6}

So now data[2] = data[0] + data[1]. As these examples show, inclusive_scan and exclusive_scan are permitted to be performed in-place. Thrust also provides the functions transform_inclusive_scan and transform_exclusive_scan which apply a unary function to the input sequence before performing the scan. Refer to the documentation for a complete list of scan variants.


Thrust provides support for partitioning and stream compaction through the following algorithms:

  • copy_if : copy elements that pass a predicate test
  • partition : reorder elements according to a predicate (true values precede false values)
  • remove and remove_if : remove elements that fail a predicate test
  • unique: remove consecutive duplicates within a sequence
Refer to the documentation for a complete list of reordering functions and examples of their usage.


Thrust offers several functions to sort data or rearrange data according to a given criterion. The thrust::sort and thrust::stable_sort functions are direct analogs of sort and stable_sort in the STL.

  #include <thrust/sort.h>
  const int N = 6;
  int A[N] = {1, 4, 2, 8, 5, 7};
  thrust::sort(A, A + N);
  // A is now {1, 2, 4, 5, 7, 8}

In addition, Thrust provides thrust::sort_by_key and thrust::stable_sort_by_key, which sort key-value pairs stored in separate places.

  #include <thrust/sort.h>
  const int N = 6;
  int    keys[N] = {  1,   4,   2,   8,   5,   7};
  char values[N] = {'a', 'b', 'c', 'd', 'e', 'f'};
  thrust::sort_by_key(keys, keys + N, values);
  // keys is now   {  1,   2,   4,   5,   7,   8}
  // values is now {'a', 'c', 'b', 'e', 'f', 'd'}

Like their STL brethren, the sorting functions also accept user-defined comparison operators:

  #include <thrust/sort.h>
  #include <thrust/functional.h>
  const int N = 6;
  int A[N] = {1, 4, 2, 8, 5, 7};
  thrust::stable_sort(A, A + N, thrust::greater<int>());
  // A is now {8, 7, 5, 4, 2, 1}

Fancy Iterators

Fancy iterators perform a variety of valuable purposes. In this section we'll show how fancy iterators allow us to attack a broader class problems with the standard Thrust algorithms. For those familiar with the Boost C++ Library, note that our fancy iterators were inspired by (and generally derived from) those in Boost Iterator Library.


Arguably the simplest of the bunch, constant_iterator is simply an iterator that returns the same value whenever we access it. In the following example we initialize a constant iterator with the value 10.

#include <thrust/iterator/constant_iterator.h>
// create iterators
thrust::constant_iterator<int> first(10);
thrust::constant_iterator<int> last = first + 3;

first[0]   // returns 10
first[1]   // returns 10
first[100] // returns 10

// sum of [first, last)
thrust::reduce(first, last);   // returns 30 (i.e. 3 * 10)

Whenever an input sequence of constant values is needed, constant_iterator is a convenient and efficient solution.


If a sequence of increasing values is required, then counting_iterator is the appropriate choice. Here we initialize a counting_iterator with the value 10 and access it like an array.

#include <thrust/iterator/counting_iterator.h>
// create iterators
thrust::counting_iterator<int> first(10);
thrust::counting_iterator<int> last = first + 3;

first[0]   // returns 10
first[1]   // returns 11
first[100] // returns 110

// sum of [first, last)
thrust::reduce(first, last);   // returns 33 (i.e. 10 + 11 + 12)

While constant_iterator and counting_iterator act as arrays, they don't actually require any memory storage. Whenever we dereference one of these iterators it generates the appropriate value on-the-fly and returns it to the calling function.


In the Algorithms section we spoke about kernel fusion, i.e. combining separate algorithms like transform and reduce into a single transform_reduce operation. The transform_iterator allows us to apply the same technique, even when we don't have a special transform_xxx version of the algorithm. This example shows another way to fuse a transformation with a reduction, this time with just plain reduce applied to a transform_iterator.

#include <thrust/iterator/transform_iterator.h>
// initialize vector
thrust::device_vector<int> vec(3);
vec[0] = 10; vec[1] = 20; vec[2] = 30;

// create iterator (type omitted)
... first = thrust::make_transform_iterator(vec.begin(), negate<int>());
... last  = thrust::make_transform_iterator(vec.end(),   negate<int>());

first[0]   // returns -10
first[1]   // returns -20
first[2]   // returns -30

// sum of [first, last)
thrust::reduce(first, last);   // returns -60 (i.e. -10 + -20 + -30)

Note, we have omitted the types for iterators first and last for simplicity. One downside of transform_iterator is that it can be cumbersome to specify the full type of the iterator, which can be quite lengthy. For this reason, it is common practice to simply put the call to make_transform_iterator in the arguments of the algorithm being invoked. For example,

// sum of [first, last)
thrust::reduce(thrust::make_transform_iterator(vec.begin(), negate<int>()),
               thrust::make_transform_iterator(vec.end(),   negate<int>()));

allows us to avoid creating a variable to store first and last.


In the previous section we showed how transform_iterator is used to fuse a transformation with another algorithm to avoid unnecessary memory operations. The permutation_iterator is similar: it allows us to fuse gather and scatter operations with Thrust algorithms, or even other fancy iterators. The following example shows how to fuse a gather operation with a reduction.

#include <thrust/iterator/permutation_iterator.h>


// gather locations
thrust::device_vector<int> map(4);
map[0] = 3;
map[1] = 1;
map[2] = 0;
map[3] = 5;

// array to gather from
thrust::device_vector<int> source(6);
source[0] = 10;
source[1] = 20;
source[2] = 30;
source[3] = 40;
source[4] = 50;
source[5] = 60;

// fuse gather with reduction: 
//   sum = source[map[0]] + source[map[1]] + ...
int sum = thrust::reduce(thrust::make_permutation_iterator(source.begin(), map.begin()),
                         thrust::make_permutation_iterator(source.begin(), map.end()));

Here we have used the make_permutation_iterator function to simplify the construction of the permutation_iterators. The first argument to make_permutation_iterator is the source array of the gather operation and the second is the list of map indices. Note that we pass in source.begin() for the first argument in both cases, but vary the second argument to define the beginning and end of the sequence.

When a permutation_iterator is used as an output sequence of a function it is equivalent to fusing a scatter operation to the algorithm. In general permutation_iterator allows you to operate on specific set of values in a sequence instead of the entire sequence.


Keep reading, we've saved the best iterator for last! The zip_iterator is an extremely useful gadget: it takes multiple input sequences and yields a sequence of tuples. In this example we "zip" together a sequence of int and a sequence of char into a sequence of tuple<int,char> and compute the tuple with the maximum value.

#include <thrust/iterator/zip_iterator.h>
// initialize vectors
thrust::device_vector<int>  A(3);
thrust::device_vector<char> B(3);
A[0] = 10;  A[1] = 20;  A[2] = 30;
B[0] = 'x'; B[1] = 'y'; B[2] = 'z';

// create iterator (type omitted)
first = thrust::make_zip_iterator(thrust::make_tuple(A.begin(), B.begin()));
last  = thrust::make_zip_iterator(thrust::make_tuple(A.end(),   B.end()));

first[0]   // returns tuple(10, 'x')
first[1]   // returns tuple(20, 'y')
first[2]   // returns tuple(30, 'z')

// maximum of [first, last)
thrust::maximum< tuple<int,char> > binary_op;
thrust::tuple<int,char> init = first[0];
thrust::reduce(first, last, init, binary_op); // returns tuple(30, 'z')

What makes zip_iterator so useful is that most algorithms accept either one, or occasionally two, input sequences. The zip_iterator allows us to combine many independent sequences into a single sequence of tuples, which can be processed by a broad set of algorithms.

Refer to the arbitrary_transformation example to see how to implement a ternary transformation with zip_iterator and for_each. A simple extension of this example would allow you to compute transformations with multiple output sequences as well.

In addition to convenience, zip_iterator allows us to implement programs more efficiently. For example, storing 3d points as an array of float3 in CUDA is generally a bad idea, since array accesses are not properly coalesced. With zip_iterator we can store the three coordinates in three separate arrays, which does permit coalesced memory access. In this case, we use zip_iterator to create a virtual array of 3d vectors which we can feed in to Thrust algorithms. Refer to the dot_products_with_zip example for additional details.

Additional Resources

This guide only scratches the surface of what you can do with Thrust. The following resources can help you learn to do more with Thrust or provide assistance when problems arise.

We strongly encourage users to subscribe to the thrust-users mailing list. The mailing list is a great place to seek out help from the Thrust developers and other Thrust users.

Powered by Google Project Hosting