moin

is there a bad changes when i installed PSP CFW 6.39 to my:

-psp 3000 -7g -ofw 6.39

pls reoly for this message....:D

tnx =)

I have a psp 2000 running 6.39 OFW and never been hacked.Do i need to have a pandora's battery/magic mem stick to run this or doijust follow your directions verbatim? thanks -J

No it is not necesary. Pandora battery died with this CFW you just run it and that´s all.

I take a moment to say to all people out there asking if it will work on their psps: YES! IT RUNS ON IT. IT RUNS ON EVERY SINGLE PSP MODEL OUT THERE!. Phew... I had to say that someday.

P.D.:English is my second language. Don´t comment about its horrible grammar or spelling.

Rodel, thanks for clarifying that for other people. Also, your spelling and grammar is much better than most people who have English as their 1st language.

Hi there! I'm new in the scene, and I´ve never been hacked my psp, so I have a stupid question: I must put the ISO/CSO images in the root of the MS?, or I should create a folder called "ISO" or "CSO" for it? or I must put teh image files in the PSP/GAME folder? thanks! and congrats for your excellent job!

Great guys! Congratulations for the job! It works perfectly! Thank you!

Wow so I take a year break from paying attention to the scene and then all of a sudden I come back to finding there has been about 8 months of coding miracles. Guess I was a bit too patient :x Thanks for the hard work guys :)!

I have already 6.20 PRO-B5 what i should do to instal PRO-B6?My psp is a 2000 model.

I tried to install the update, but the screen went black for a long time that I had to use the power button I have a 3004 with 6.20, I tried pro-b5, pro-B6 and faced this issue. Formatted the MS, and still got the same blank screen. Moved to OFW 6.35, and tried install the PRo-B6 version of that running the updatepro and got the same blank screen... Was advised to turn backlight auto adjust off, but it is already off, tried switching it on, then off as well. Same result. I am using the UPDATEPRO folder for that OFW version. I noticed 2 files that get created with each attempt installer.prx and Rebootex.prx In each attempt the PSP start loading and then goes blank, the ms would indicate some activity for few seconds then everything freeze with the blank screen still on. Waited like 20 min the used the power button to switch it on and off... Any advice? Please? Help !

the files people use for umd psps are backwards compatible with go models

"I have already 6.20 PRO-B5 what i should do to instal PRO-B6?My psp is a 2000 model."

I did. It was painless, just put the Proupdater on the Memstick, run it, press X to install and voila. I didn't even have to reinstall the perma-patch.

Two quick questions. First, is there any benefit to updating to 6.39 from 6.20?

And secondly, will anyone patch FuSa? to be compatible with 6.20+? They dropped their support of the project, and I really want to be able to play TV out in full screen..

what about TA88v3? I know you said every model, but this is a special case

So does this allow you to download free games for your psp and play them ?

When i turn on my psp with 6.39 I use usb connection and get ms0 but when i run fast recovery and enter usb mode i get flash0 is this normal

@carlilel... I trusted on the message above that this works on any PSP and so I installed 6.20 PRO-B6 on my PSP 2g with mobo TA88v3 and it worked, however I think I may have found a bug. Without the perma patch (which I haven't installed) when looking at the whatchumycallit menu (pressing "Select"), if you have the menu up and then you press "O" the psp will freeze into a black screen immediately and that's it, you have to reboot. After running PRO-B Fast Recovery, it's working normal again... so there you have it... Thanks to the devs for the great work and continues develoment! Very appreciated! Keep up the great work....

Hi i have a couple of questions - be great if someone could answer these.

1) when i posted this comment i am using my psp. can i still use cwcheat on this cfw or not? 2) HOW did they make these cfw? it is amazing!

=] i would love to know how to do this. Oh finaly 3)what would i benafit from using this and other types of cfw?

cmd

HELP ME when i hold l it does not work plz help

nvm figured it out i guess

What exactly happens to the patched OFW modules once you uninstall PRO CFW using the PROUPDATE Executable? Will they go back to their original state as if you had not installed PRO CFW?

Does installing an OFW after having installed PRO CFW on a PSP have the same effect as uninstalling PRO CFW using the PROUPDATE Executable? Can you revert a PSP to its original state, with only OFW files on its flash memory partitions and Reboot sector, after having installed PRO CFW on it?

The reason for this questions is that users of PRO CFW might want to revert their PSP to its original state before sending it to Sony for warranty service, and avoid a refusal of service from Sony by saying that they voided the warranty of their PSP by installing a CFW on it. Could they prove this fact by finding traces of such CFW on the system even after successfully uninstalling it?

@comment above

No Mate. NO OFW modules were patched when installing PRO.

The modules that were added ie. systemctrl.prx is just to patch the security check and run extra features and load other unsigned modules.

PRO never patches any OFW modules...the patch only works in memory(RAM)... If what you said happens then everyone who has pro installed have BRICKed their Precious...

Sony can't find it unless they dig in to your psp with their unleaked tools...unlikey to happen mate.BTW if you send it to them they will always update to the latest firmware at the moment"6.39"(but atm we can all downgrade without a problem).

IF you want to revert back to OFW without pro then run PROUPDATE and uninstall by pressing TRIANGLE. If you have 6.20 PERMANENT PATCH then i suggest UPDATING to 6.35...I have other tricks to avoid bricks like you can run a 6.20 UPDATE while in 6.20 PRO-B6(Official release) and doing so reflashes OFW files to the NAND without getting BSODs when your PSP restarts after finishing the update.

Good luck!

Thanks for your quick answer.

how do i run umd video ISOs? i added it to the ISO folder and it doesn't come up, all games do but not UMD video. I'm running 6.39 pro-b6

@Video UMD Mount Question

Make a Folder inside the ISO folder called VIDEO then put your umd video rips there.

note: to activate UMD video rips from the XMB: press select and go down to ISO Video Mount; then scroll using left and right button once you have chosen the MOVIE press X or Circle then your PSP will restart with the UMD VIDEO mounted under VIDEO.

have fun with your legally own Video rips. :D

I'm also running 6.39 PRO-B6 on PSP-3000 4g and my PRO VSH Menu doesn't have the option for ISO Video Mount. Do I have to install a plugin for it to be enabled? I googled it and only found info regarding CFW 3.71m33-4 which obviously doesn't apply here.

Great man. you are a good teacher. Mine is working now. Thank you.

@brutefor...@gmail.com

just like cont...@juanbernal.net said, there is no video mount in the vsh menu on 6.39 pro b-6.

oh my cfw is running a 3g kernel on a psp 3000.

@darkshin

Oh sorry mate :)

I was assuming you had a clone to PRO's source(latest revision)...and Compile it on your own.

You probably have the original 6.20 PRO-B6(It doesn't have UMD Video mount).

@brutefor...@gmail.com

you mean the nightly build one? from what i understood psp 3000s and Go models run risk of bricking, i never took a second look when i read that.

my psp is my baby :)

@darkshin

no not the nightly build one? I think it was last weeks or was it this Monday's revision that I compiled...I honestly don't remember.

all I know is that the revision I compiled was before the inferno bug fix by hramfaxi, after coldbird's code merge,and neur0n was added to the group. and renamed the owners to TEAM PRO.

does the monday rev. one have the umd mount option and is it stable on psp 3000 3g?

downloded the 6.39pro and put it in the psp/games

the sdk come up as corrupted?

im not even sure i did it right o.o but when i check the system info it says 6.39pro does that mean i did it corredctly?

Where do I put the update file (the one called EBOOT.PBP)?

@filipe u make a UPDATE folder in games and u put it in there

i got psp3004 9g and 6.35 prob6...and its totally perfect lcfw...no lags...frezes...no errors...can take every prx ...thx guys...da best...

I got a PSP 3000, 6.35OFW.. when i installed the 6.35pro-b6..it shows me the black screen but there are sounds when pressing the directional buttons. but when i am in OFW.. it shows me screen.. but when i am in CFW.. it shows a black screen.. do you know what is happening?

I have the firmware installed and it installed fine and everything but how I do play emulated games and such now.

confirmed working on my TA88v3. Finally I don't have to mess with the chicken scenario and I can turn of my power! Great work. Thanks for the help @trinit...

i have psp 2g 6.35ofw & used the 6.35pro-b6 updater. my problem is when im in a game then thinking to exit the game by pressing the Home button, i can't use the directional button & can't exit the game (even all the keys are working well). am i only encountering these? need help

@madjon it happens not at ofw?

it's ok now. i can exit the game LOL. dont mind what i said earlier. it works great on my psp 2g 6.35ofw & now im using 6.35 pro-b6 instead using my previous 6.35pro. thanks for the pro cfw.

Erm, how do you get plugins?

Uhm. Im running on 5.50 Prometheus, how do I do this?

Hello,

This is my first time hacking my PSP as well, so I have a question. I downloaded the 6.39 UMD version for my PSP 3001, and according to the instructions I should have two folders after I unpack the 7z file. However, I only see one folder named "UPDATE" which contains a 30MB file called "EBOOT.PDP". Is this all I need? I'm a bit confused.

Thanks,

J

ISO/CSO dump? run? Howto please.

Nevermind, I'm an idiot. I downloaded one of the mirror downloads of the original firmware update from this page.

I have PSP Fat 1004 Ceramic CFW 5.50 M33. I see in umd place IC1003 and IC6001, can use this? Need Update firsth to 6.39 OFW to conver to CFW? Need Pandora or can execute in this OFW? Thx.

@iamselli - It's possible using plugin's (tried but didn't work for me) and using apps. For 3xxx app is called UMDumper 0.30 D. WARNING After dumping your UMD connect PSP to PC and change iso name as it will have one additional character (looks like square). Then it should work via Inferno driver

Can anyone can describe me differences between M33driver and Inferno? :)

btw I'm on 6.39 4g PSP-3004 and don't have ISO Video Mount in PRO VSH Menu :) Not a biggie but I think authors forgot to put in in released files :)

If I can help any how please tell me :)

Hi, hoping someone can be kind enough to help. I am trying to hack a PSP 2000 running 6.37, all standard and never hacked before. I am trying to download this patch, and I essentially copy over the 639PRO_B6 Folder folder to the memory stick and...nothing. I have the 639PRO_B6 Folder folder and another folder called UPDATE into which I have copied the PROUPDATE eboot file (since it's frankly not made clear at any point what or how I should proceed, to be honest, you guys are worse than Linus users).

When I put the memory stick into the PSP and hit the O key I can see one movie there plus an icon for Corrupted Data, and I can't access it. So my question is, how do I load the custom firmware, how do I get past the "corrupted data" problem, and could the existence of these errors possibly be forseen by the people writing the above guide so that, you know, the large number of people who don't know what they're doing will know what to do next.

I hear random talk of recovery mode and so on, is there some other way I'm supposed to let the PSP know it should load or otherwise interact with the firmware files?

you first have to update to 6.39 of which eboot.pbp can be downloaded from sony.

6.39proupdate(installer) uses the explot of 6.39 firmware. so this hack doesnt function at other firmware. i think it's your "corrupted data" problem.

can anyone help me...i'm newbie and don't know about PSP... i have PSP Go with 6.20 TN-D, i want to change it into 6.20 PRO-B6... please, teach me step by step how to make the change on my PSP... thank you... (soory for my bad english...^^)

Download files at this site. Copy PROUPDATE folder(and FastRecovery or 620PRO_Permanent folder, if needed) into GAME folder in MS.

INSTALLER and UNINSTALLER of PRO's module: PROUPDATE (follow the message) LAUNCHER: PROUPDATE(later press x) or FastRecovery(you need only wait) Permanent Patch: almost same as TN's one

oh sorry for ugly break!

INSTALLER and UNINSTALLER of PRO's module: PROUPDATE (follow the message)

LAUNCHER: PROUPDATE(later press x) or FastRecovery(you need only wait)

Permanent Patch: almost same as TN's one

I have currently the cfw 5.50 GEN-D2 so can i install the PRO cfw?

i have installed the CFW 6.39 and it's all okay. I would just like to understand the psx emulation part. Have i to install something more? Have i to convert games to eboot or can i play ISOs? I'm trying to play Kurushi converted with POPCONV but it will block at the boot screen with PSX logo. Do i need to place somwhere a psx BIOS?

i have installed the CFW 6.39 and it's all okay. I would just like to understand the psx emulation part. Have i to install something more? Have i to convert games to eboot or can i play ISOs? I'm trying to play Kurushi converted with POPCONV but it will block at the boot screen with PSX logo. Do i need to place somwhere a psx BIOS?

run ISOS?? thx

Hi there, I´m new in this subject, if someone could help I would appreciate it very much. I have a PSP GO - N1001 running OFW 6.39, could this hack work on it?, if so, how can I install it?; I've downloaded the 639PRO_B6.rar file and extracted the 3 folders in it: PROUPDATE, sdk and FastRecovery"; Do I have to copy the three of them into the PSP/Game folder in my PSP GO?, or I have tu run another program first?. THX

where and how I am supposed to upload the game?

Wow i am new to this all... i cant seem to fund tha Programs need for this care to help me out? have a Psp-3001 V6.39 i just want to get this done with as quick as possible any help would be great!

What programs? What psp version do you have? Just find the latest pro-b for your version from the downloads page and follow the instructions

first time for this kinda cfw thing, so if your psp is official firmware 6.20 and you want get update it to 6.39 pro, you have to update to OFW 6.39 first then change it to 6.39 pro? and you cannot be 6.20 -> 6.20 pro -> 6.39 pro??? like example if now i get it to 6.39 pro, and in future if there is a 6.45 pro release, i have to change it to: 6.39 pro -> 6.45(OFW) -> 6.45 pro???

OFW UPDATE first, PROUPDATE second. It seems same in the future.

hi guys! just wondering if this requires a Memory Stick to install on a PSP Go? and does it run all ISO/CSO games like Metal Gear Solid Peace Walker? currently on OFW 6.39

hi to all, i have just install the 6.35 pro-b6 last week and it was fine. i just have a question. 1. how can i upgrade from 6.35 pro-b6 to 6.35 pro-b7? 2. do i need to un-install the pro-b6 or just shut down my psp so it will be on ofw and run the pro b-7? if yes, how to un-install pro-b6? 3. if i want to upgrade to 6.39 do i need to un-install also the pro-b6? or just shut down my psp so that it will be ofw 6.35 ofw and upgrade to 6.39 ofw? 4. and if i change my memory stick do i need to install again the cfw or just copy the recovery?

thanks in advance. and thank to the developer :)

Hi , I installed pro b6 on my psp 3000 9g 6.39OFW. I am able to launch VFS Menu and i created an iso out of my UMD. I put the iso in the root with in a folder named ISO. I cant see the game when i select the memory stick from game menu. I am using an 8gm memory stick. I tried changing the driver but no hope. NEED SOME HELP!!!!

1/2 just run PROUPDATE and press X 3 I'm not sure but uninstall it using PROUPDATE and pressing the triangle button 4 just copy the recovery

Thanks. 1 more question. If i want to un install the pro b-6 Do i need to be on OFW or CFW? Sorry for noob question. Just making sure what am i doing. :)

Hi, I´m new to this whole PSP Hacking Thing and I wonder if this is compatible with my PSP-2001 (currently on 6.39) I didn´t buy it new so I don´t really know what system version it had for the first time and I don´t know it´s motherboard.

work thanks very much

Im Downgrading. Updating. and im Testing all PRO-CFW.

a TIP-- In the next pro-version. please you can quit the Genesis Competition Image¿ xddd

Thanks A LOT.

Greetings from Mexico. Sorry for my extremly bad english

Will the 6.20 UMD version work my on PSP 3001? My PSP is on 6.20 TN-C.

where do I get the aftermarket firmware module?

Before i try this....

1) How easy is it to do this wrong? 2) how badly will i break things if i do things wrong? 3) How much use is cfw really...?

Sidenote, 3) is just out of curiosity, i just got the psp a week ago in return for a piece of chicken.... :P

OK, so I have a psp 3000 with 6.35 ofw. when I got it last week from a friend, it already had a program called "635 HEN by Coldbird & VF" which I have to run every time I turn on the PSP to change it to 6.35 PRO. What I don't know is if this program was already installed at first and this thing I have to run is like the Fast Recovery mentioned on the tutorial. If that's the case, can I install 6.35 PRO b7 even if I have this other cfw already installed?

hoping for answers!!

I get an error saying this program does not support my fw? any ideas?

@404ad...@gmail.com Yes you can download the PRO-B7 In the 6.35 PRO folder. you can find 3 folders the PRO Update, sdk and Fast Recovery. All you have to do is to place the PRo Update folder and Fast recovery at MSO/PSP/GAME. After you copied to you memory stick unplug your usb cable from the PC and then go to the XMB of your PSP, just choose game and hit the PRO update and follow the instruction to install the PRo update for PRO-B7. After you successfully installed the PRO-B7 delete it and fast recovery should remain it because there is a time that your PSP will Boot to OFW you can only hit the fast recovery to recover your PRO-B7 installed.

@amiaca...@gmail.com

Please state the error of your PSP please give the version of your PSP and the model also

@xRe...@gmail.com

Yes you can update to the and much better because it built in ISO/CSO and PSX

Guide in installing 6.20, 6.35 and 6.39 PRO CFW

1. Please check your version and model(PSP 1000,2000,3000 and go) 2. If your PSP has a model of PSP 1000, PSP 2000, go and PSP 3000 (03g) and (04g) all the PRO CFW is fit to your model but if your PSP has a model of PSP 3000 (07g) and (09g) it fir only the 6.35 and 6.39 PRO CFW. 3. Dowload the PRO CFW that fit to your version. 4.Extract the the PRO folder to your computer. 5. In 6.20 PRO, there are 4 folder in side the PRO folder. We have PRO Update, sdk, Permanent Patch and Fast Recovery. In 6.35 PRO there are 3 folder in side the PRO folder. We have PRO Update, sdk, and Fast Recovery. In 6.39 PRO, there are 4 folder in side the PRO folder. We have PRO Update, sdk, CIPL Flasher and Fast Recovery. 6. If you have a model of PSP 1000 and PSP 2000 Non-v3 motherboard (Search in the internet for more details in PSP motheer board). You can install all the PRo cfw with (perma patch in 6.20 version) (and with CIPL flasher. CIPL means full CFW). If your model is PSP 2000 V3 and up, PSp 3000 (03g) (04g) and go you can install the PRO CFW with perma patch in 6.20 except the CIPL flasher in 6.39. And if your model is PSP 3000 (07g and 09g) only 6.35 and 6.39 except the CIPL flasher in 6.39. 7. Put the necessary folder as stated in no. 6 in MSO/PSP/GAME and in PSP go EFO/PSP/GAME. 8. After you put it unplug your usb cable to your PSP. 9. On your XMB go to game category and choose PRO Update and hit it the X or start it depend on your default button. 10. Install the PRO CFW by following the instruction on your PSP. After you installed PRO UPDATE it goes back to your XMB. 11. For PSP 1000, 2000, Go and 3000 (03g and 04g) you can install perma patch just go to the Game category again and hit the Perma Patch. Install the perma patch by hitting x after that it ask you to install perma patch, if yes use the 0 button and if no use the x button.For PSP 1000 and 2000 non v3 you can install the CIPL flasher in 6.39 just do the same in instalingl the perma patch. 12. The fast recovery remain it in your game category for those who do not have full CFW and permanent patch.

More legible version of salve's comment up above.

Guide in installing 6.20, 6.35 and 6.39 PRO CFW

1. Please check your version and model(PSP 1000,2000,3000 and go)

2. If your PSP has a model of PSP 1000, PSP 2000, go and PSP 3000 (03g) and (04g) all the PRO CFW is fit to your model but if your PSP has a model of PSP 3000 (07g) and (09g) it fir only the 6.35 and 6.39 PRO CFW.

3. Dowload the PRO CFW that fit to your version.

4.Extract the the PRO folder to your computer.

5. In 6.20 PRO, there are 4 folder in side the PRO folder. We have PRO Update, sdk, Permanent Patch and Fast Recovery. In 6.35 PRO there are 3 folder in side the PRO folder. We have PRO Update, sdk, and Fast Recovery. In 6.39 PRO, there are 4 folder in side the PRO folder. We have PRO Update, sdk, CIPL Flasher and Fast Recovery.

6. If you have a model of PSP 1000 and PSP 2000 Non-v3 motherboard (Search in the internet for more details in PSP motheer board). You can install all the PRo cfw with (perma patch in 6.20 version) (and with CIPL flasher. CIPL means full CFW). If your model is PSP 2000 V3 and up, PSp 3000 (03g) (04g) and go you can install the PRO CFW with perma patch in 6.20 except the CIPL flasher in 6.39. And if your model is PSP 3000 (07g and 09g) only 6.35 and 6.39 except the CIPL flasher in 6.39.

7. Put the necessary folder as stated in no. 6 in MSO/PSP/GAME and in PSP go EFO/PSP/GAME.

8. After you put it unplug your usb cable to your PSP.

9. On your XMB go to game category and choose PRO Update and hit it the X or start it depend on your default button.

10. Install the PRO CFW by following the instruction on your PSP. After you installed PRO UPDATE it goes back to your XMB.

11. For PSP 1000, 2000, Go and 3000 (03g and 04g) you can install perma patch just go to the Game category again and hit the Perma Patch. Install the perma patch by hitting x after that it ask you to install perma patch, if yes use the 0 button and if no use the x button.For PSP 1000 and 2000 non v3 you can install the CIPL flasher in 6.39 just do the same in instalingl the perma patch. 12. The fast recovery remain it in your game category for those who do not have full CFW and permanent patch.

what do you mean by 03g 04g and such? I have no idea what those mean.

the best CFW ever

Well my question is, I have a PSP 1000 with 5.50 gen d3, in order to use 6.39 pro, do I have to upgrade first to Sony OFW 6.39 and then use the 6.39 pro files in order to use this CFW, and also what are the advantages and disadvantages between the 2,please reply, I will really appreciate it, regards.

03g, 04g are hardware generations. And btw - CIPL will NOT work on 6.39 Pro-B7 PSP 300X (04g) - tried ;) So comment above is not correct.

I would like to ask developers or someone with enough knowledge - is there a way to use CFW PSP to connect it to PS2 (two ;) and read memory card data? It could lead not only to easy back-up/recovery save files but more over with write mode it could lead to put memory card exploit on PS2 and enjoy those games which Sony hasn't re-relased on PS3 :)

@PCDra...@gmail.com 03g and 04g means that is the type of your motherboard in PSP 3000. If you install the PRo CFW go to your settings to system and to your system information. Under that category you can see the MAC address its define of what mother board of your PSP.

@Vdahb...@gmail.com You have to install first the OFW 6.39 before you install the PRO cfw just follow the instructions above under my guideliness in installing PRO CFW. Your model will able to install the Full CFW.

@hiry...@gmail.com Read the guidelines carefully before you comment its in there ok in No. 6.

Quick question, my friend is trying to install this on his psp-go. Will the CIPL launcher start up the CFW every time it cold-boots like it does for my psp phat for his GO?

And does the GO have any limitations to what can be put on it after its hacked?

@salve - Yes it is. But written using odd words imho ;)

In short - PSP's with motherboard v3 can't use perma or CIPL on software 6.39. Mine is 3004 4g , FW 6.39 and CIPL says it's not for my mobo :)

@elmendor - I'm not sure but you might need to run FastRecovery each time - which isn't a biggie ;)

To authors - with memory card speedup Crazy Taxi Fare Wars looses few frames - removing acceleration, or chaning it to VSH only fixes the problem :)

What about using CFW PSP to access PS2 and make it able to run back-up's? :)

@elmendor You can not install the CIPL flasher if you use PSP go because it will brick your PSP. PSP Go is not fully flashable. Use only the 6.20 permanent patch its better. But before you do that you have to downgarde your version if you are in 6.39. I will post the downgrader later.

@ hiry Your wrong mother board with PSP 2000 V3, PSP 3000 (03g and 04g) and PSP GO (05g)can install the permanent patch in 6.20 version "except 6.39 CIPL full CFW". Just read the instruction just go here all instruction you need for your PSP http://code.google.com/p/procfw/

@Salve:

I've read the instructions, yet you have not. So I'll copy exact line and using mark important words.

In short - PSP's with motherboard v3 can't use perma or CIPL on software 6.39.

If you READ what I've written, you will see easily that I'm referring to OFW 6.39. I even added line about MINE own PSP which is on this FW. I haven't said PSP v3 on 6.20 can't use CIPL/perma! I've exactly said that PSP v3 running 6.39 CAN'T do that. Read before you start posting :)

@hiry In OFW 6.39 there is no perma patch of PRO only CIPL flasher (CIPL means full cfw and perma patch is only available at 6.20 version this cfw is only a temporary because the kirk keys was locked for PSP mother board V3 up. Im not saying that PSP 03g and 04g is ok to use the CIPL flasher. Sorry im just clearing. Look at your first comment you said that my comment is wrong about 03g and 04g mother board. Please visit this site for more added information http://wololo.net/talk

i managed to bricked my PSP while installing the perma patch. i can't say if is fully bricked or not. i can't boot to recovery menu using HOLD R while booting. the emergency unistall for perma patch does not work also.

how do i know what motherboard version i have? im using a psp3000. thx for the help :)

Its working! Woaaahh!! Thanks alot!

@IZH.aL0n...@gmail.com You can only know your version if you are in cfw mode. What version of your system is? You can download here its either 6.20 PRo, 6.35 PRO and 6.39 PRO. After you successfully installed it go to your system settings to system information and take a look under the mac address it will say what model do you have its either 03g, 04g, 05g (psp go), .07g and 09g

@akocma...@gmail.com What happen when you install the perma patch. In unstalling your perma patch go to this site its a gudelines to avoin bricking your psp. http://wololo.net/talk/viewtopic.php?f=17&t=7365

Where are the PROUPDATE etc files?!?!

@salve...@gmail.com it so happen that i made a mistake while installing the perma patch i forgot to disable my plugins. i can't do the upgrade since i can't boot even in recovery menu.

@lonewolf...@gmail.com go to download page and down load it either 6.20, 6.35 or 6.39 PRO. @akocma...@gmail.com Try this method. Take out your battery and put it back before you pu it on you have to press select, start, O,X,Triangle, and square. You have to press it all and you put it on. It goes back to the original firmware.

Thanx a million guys... This is running flawlessly on my PSP 3001 slim... All ISO loads so far and I can do full backups of my UMD's... Keep up the good work, your followers got your backs...

One problem... I have a 9g 3001 at 6.39 and the CFW would go back to OFW when ever the PSP reboots. Any permanent install for this Mobo type yet? Or am I missing out on something. It works fine after reboot on my God of War Edition 2001 Slim previously on M33 5.50 GEN-d3. Thanks in advance for the help.

@shirlon...@gmail.com In 6.39 PRO there is no permanent patch (temporary CFW) its only a CIPL flasher full (CFW). You have to be carefull on that because you have a PSP 3001 brite so that is not fully hackable. If you want to have a perma patch in 6.20 PRO just use the downgrader by davee and some1 go to this site for more tutorial on how to use downgarder www.wololo.net/talk and go to downgrader section. But before you do that you have to check first your model if it is 03g, 04g, 07g 0r 09g. If you are in 6.39 PRO version,go to setting under system information and you can see the Name the version and what model do you have. Your PSP 2001 slim is a fully hackable so it can install Light CFW and Full CFW anytime. Hope it can help...

In addition to shirlon you have 9g so you can not use the downgrader to 6.20 PRo you can only downgrade to 6.35 and upper version.

thanks a millions :D this is the best CFW ever :D

so what games can i actualy play with this? i got it all installed and ready to roll

I tried putting the iso/cso files in psp/ISO folder but it doesnt show up then, if i put it in psp/game/ISO it does show up but as a corrupted file. Help?

@cheesedr

ms0:/ISO(Folder) ef0:/ISO(Folder)

Oh i see thanks, always thought psp/iso instead of F:/iso

Hi - Any chance of CFW PRO on 6.60 PSP ?

not yet

Hi, I installed the 6.39 cfw pro on my psp. It worked perfectly until i had the idea of leaving the game i was playing and do the 'remote play' thing on my ps3. I tried running the fast recovery and all i get is the psp white screen (the one you have everytime a game starts), after about 10 seconds the psp just shuts off. Same thing happens when i try and reinstall the pro update. I tried 'restore default settings' and it still won't work. Any Ideas?

i have psp 6.38 ofw what can i do now to hack?

update to 6.39 or downgrade it...

Does anybody have an answer to my problem?

I posted it 4 days ago: Hi, I installed the 6.39 cfw pro on my psp. It worked perfectly until i had the idea of leaving the game i was playing and do the 'remote play' thing on my ps3. I tried running the fast recovery and all i get is the psp white screen (the one you have everytime a game starts), after about 10 seconds the psp just shuts off. Same thing happens when i try and reinstall the pro update. I tried 'restore default settings' and it still won't work. Any Ideas?

@titri Maybe one of your plugins is the fault. Go to the seplugins folder and open game.txt, pops.txt and vsh.txt and change all the "1" to "0"

Anyone know if 6.60 pro is perm yet for psp go 5g

I have a question. I notice 6.35 PRO file size is smaller than others since B8. Is there anything specific why it's like that?

I do understand for no perm install on 6.35 but even compare to 6.39 and 6.60 PRO, the size is smaller. I'm curious why.

I have a PSP 3004 OFW 6.60 - model (9g) Is it hackable? I mean can I install CFW 6.60(fix1) inorder to play games via memory Stick? Please help me out!:)

PRO works on 9g model try it out :)

PSP GO 5g 6.60 Pro works :D

I am currently on 6.20 Pro-B8 Permanent I want to install Pro-B9. Someone told me its ok not to remove the permanent patch of Pro-B8. And just update directly to Pro-B9 without removing the permanent patch. But what if I want to uninstall the permanent patch. What permanent patch should I use Pro-B8's or Pro-B9's?

I installed Pro B9 without reinstalling permanent patch again

I think the patch has not changed at all since before B8

It works perfectly for me

Just run installer Hold L trigger and press x will reinstall B9 and you should be done :)

6.60 pro-b9 can not PLAY Djmax3

@randqalan so its ok to overwrite install a pro-b8 to pro-b9 and why hold the L trigger while installing?

Yea I had no problems installing PRO-B9 over B8 without removing perm patch :) Just hold L trigger and hit x that easy

The reason for L trigger I did not uninstall PRO-B8 I just installed over it with B9

@randqalan thanks for tip last question, if I want to remove the permanent patch and I'm in Pro-b9 but didn't remove the pro-b8 perma patch which one should I use in uninstalling the perma patch, pro-b8 or pro-b9 perma patch in case I want to go back to 6.20 OFW.

They should work the same on both versions so what ever is easiest for you to put on MS

But make sure you have vshorig.prx on root of MS before you try to uninstall perm

Thank you for the fast reply I have backed up my vshorig.prx in my pc and its always in my mem stick. Thank you again for helping me!

Thanks guys for your responses. I figured it had something to do with the 9g motherboard. This was very informative and I really appreciated all the help... You guys rock... Stay focused...

Can i install this on my PSP 3002?

It depends on your OFW.

Thanks to this downgrader Chronoswitch Downgrader v5 even 9g models can have 6.20 perm patch

I have successfully done this myself with PRO-B9 :D

@randqalan@yahoo.com Nice!

uh guys i have a problem here it seems that even if i successfully followed every instructions when it comes to down grading from 6.39 to 6.35 or 6.25 it always says u already have the latest version no need to update and i also tried some other down grading styles and frimwares i though it would work but when every time it finishes to install it definitely reverts to 6.39.... damn..

Download this http://psp.dashhacks.com/2011/09/01/psp-chronoswitch-downgrader-v5-released/

Put it in psp/games/Chronoswitch/EBOOT.PBP

Download firmware you want to go to

Put it in psp/games/UPDATE/EBOOT.PBP

boot system goto downgreader in ms or ef games and boot it say yes to it and let it downgrade

once done you should be on new OFW

Then get the same CFW to match your OFW

or try this downgrader works with 5g down http://psp.dashhacks.com/file/2094

Excuse me if I install the patch CIPL_Flasher over a console 9g (TA-088v3) what happens? Brick or error?

In the "System Information" MAC Address appears to me the words 9g. Indicates that I have a TA-088v3? A friend of mine is 1g.

Excuse me for the mistakes but my English is bad.

09g its a permanent brick and cannot be fix even by a pandora don't install the CIPL_Flasher that is for 01g & some 02g psp only.

The flasher will refuse to work anyway but if you are willing to downgrade with Chronoswitch Downgrader v5 and go 6.20 PRO then you can use perma patch and I have done it with 9g models :)

But the safest way is to just use FastRecovery if you turn you PSP off that is why if not perm then keep FastRecovery on MS

ok, thanks for the explanation, but if I have a 5g console can be installed the patch?

yes i have a 5g but you have to use PRO-B9 6.20 and run perm patch you install PRO run perm press x after perm to check make sure everything seams fine in xmb then run perm again and on last prompt press o it should say installed patch then it will boot xmb after it will be perm you can shut down and boot to CFW no need for FASTRECOVER so delete it if all went well

Ok, thanks for the answers. But I prefer to use the 660pro-b9 with FastRecovery.

hi there.. need some advice.. on updating to 6.60 pro B9. I just updated my CFW 5.50 prom4 to ofw 6.60. i have downloaded 660pro-B update but after running it, it just shut down without booting into pro-B9. what happen here? how to solve this. Thanks

Ok probably a plugin problem hold right trigger when you use quickstart disable your plugins in recovery menu

thanks but recovery not available in OFW. still in OFW trying to install CFW 660 pro-b but after successfully install prob-b it will reboot but it just shut down and not able to boot into pro-b.I had to on the power and it reboot back to OFW. Any suggestion?

after OFW use fastboot hold Rtriger until recovery menu disable pugins by recovery reboot but another method is just use OFW hook to pc and disable manually by changing 1 to 0 in vsh.txt then try to reboot fast recovery

yes...it works.. you save my day ..thank you very much...its because of the plugin..now can play again..thanks mate...

Just wanted to say thank you. I 've been using TN-Hen for a long time and i thought yo give PRO a try and i must say i am extremely pleased. Very easy installation, no need need for ISO loaders, one click to boot the cfw, can login to PSN without having the latest ofw. I am definetely sticking with PRO. Keep up the good work and thanks again.

I wanted to ask you one thing, with a plug-in which was applied to 550GEN-D was possible to connect your PSP to xlink kay without using WiFi?, with the USB cable. You can do with CFW PRO?

I have tested Xlink Kai on 6.20 PRO B9 and it works. Not sure about other revisions

without WiFi?, with the cable?

Tehering with the cable.

plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz help me i have psp 3004 9g v6.60 software version is 6.60 so plz tell me how should i hack it and get free games for psp in playstation store an wen i copy any firmare on psp their is error coming up like corrupted data and wen sum firmware works they come with error could not start the game

plzz help me i need to hack it with 5,03 or above

is any body der

i have psp 3004 9g running 6.60 i need to hack it but wen i download any firmware an put it in psp their is error coming up lyk data corrupt AND COULD NOT START GAME

You are creating Folder named UPDATE and putting EBOOT.PBP in folder then but folder in PSP/Games folder right

Will the popsloader v3 work on 6.39 Pro-B9 LCFW he won't let me downgrade it to 6.20.

Can any one HELP me.. :( :'( I have a psp 3004 v6.20 TN-(A), not a permanent custom firmware... I put the 6.60 OFW on the memory stick and when i was upgarding it...and then suddenly the battery came out...as the battry cover was not there... :/ and now its not displaying anyhing...i think it has been fully bricked... anyone know how to unbrick it?? Please HELP me.. :(

Pandora won't work so your psp 3004 is fully bricked sorry.

ok im on 6.20pro b8, how do i put game on it?and how do i play ps1/gba/snes games?

I have a problem, I download the 6.20 Nightly Build, but only get one file. Now what do I do with that file and where do I put it. Also why did they change it to one file?

i have a PSP 3004 (6.39) i hacked it to 6.39 pro b9 i am unable to install .ctf themes,, i have copied cxmb folder, seplugins folder in root( with cxmb and vsh.txt inside!!), enable cxmb in recovery menu. but my themes are not listed in themes settings( once a .ctf themes was listing in themes setting but when i clicked on it psp rebooted and switched it to original theme with small icons) actually i have seen(downloaded) two different size cxmb file,one is 24kb another 11 kb which one is for prob9?? and give me a link to download .ctf for prob9

hi. I want to ask about restore default setting.. If i restore my psp setting it will brick my psp? My psp model is psp go motherboard 05g..

thanks nice cfw , the best...thank you thank you thank you; so far all my iso and cso works and emulators run perfectly, iam using the 6.39 in my psp 3000.... any tutorial for ctf themes,? where to download?

Yes go here: http://wololo.net/talk/viewforum.php?f=27

WILL IT WORK ON MY PSP 3001

yes

is safe to use Skype on the PSP with CFW (active or not), there is no danger of the BAN console?

Im currently using a version 5.03 and im trying to upgrade to 6.60 Pro-B9 to play fifa 12. But idk how! Can someone pls guide me along! I need help urgently! Please reply to my message someone.

I installed the pro b10 on my psp, but when I run god of war ghost of sparta gives error 80010002 and when I run final fantasy type-0, the game crashes on loading screen and restarts psp, what might be happening?

Is pro-b10 stable now is there changelogs out there.

I have 6.20 PRO-B6 on my 3000 version PSP. I got 6.60 Fix cfw and tried to install it. When I run updater it tells me "Sorry. This software does not support your firmware version". What am I doing wrong? Sorry, it's my first time updating firmware myself.

Ok first if download 6.20 if perm remove perm first then uninstall 6.20 Then get Sony OFW update run it then get 6.60 PRO-B10 then install it to get 6.60

But if I was you I would just download and install 6.20 PRO-B10 so you can stay perm 6.60 has to use fastboot and 6.20 can still access PSN and works the same

can somebody help me on aim, msn, steam, or skype? i have psp 3000 with 6.20 pro-b6. I don't know if permanent or not. I want to get at least 6.39, maybe 6.60. I don't know how to update from 6.20 pro-b6 to higher.

thanks.

ok, i update to original 6.60, then i get 6.60 cfw and it works...i can play games on memory stick and everything. i restart psp and it's back to original 6.60 (non-cfw). D:

Why did you want to get 6.60? There is nothing new from 6.20. You'll have to run fast recovery every time you restart your psp.

i wanted higher cfw than 6.38 because Breath of Fire IV PSN game requires 6.38 or 6.39 (don't remember). I now downgraded from 6.60 to 6.20 and will install 6.20 cfw. it seems there is no 6.39 permanent cfw nor 6.60 perma cfw. ): maybe someday?

Try using a custom version.txt

I was kind of up set about this: my CFW stopped working, as in when I press fast recovery, it pauses and then shuts off. Detail: I cant reinstall it or uninstall and install, I've tried it already, and now all my games don't work.

BTW I CANT INSTALL A NEW CFW, IT JUST FREEZES IN ANY WAY!

hello, i got psp 3000 version 5.0.3 Gen C (Full). Can i instal the pro version

hello...1st,sory about my grammar..i'm not english man cause i'm malaysian boy..i have a psp go..then i upgrade it with the internet from psp updater..from 6.39 to 6.60..everythings working but after that all my games are missing..but if i check in the cpu in iso folder..it still in there..but in my psp there is no game..i try use the recovery..but still same the game not come out..help me please..i'm still a new user in using a psp..thank you..

Maybe you upgraded from 6.39 PRO to an official 6.60, hence, even if you have FastRecovery in your PSP it doesn't have anything to recover. Go to System Settings > System Information to check if you're using PRO or official firmware.

If that's the problem, run 6.60 PRO-B10.fix ProUpdater? and install PRO.

i got prob with my psp...it is 6.60..OFW ithink.. i tried to install CFW many times (from many sources though)but it just doesnt work.. when i tried to run PROUPDATE,,the screen turn black(the green light still on).. after quite a while it just turn off..i donno why.. i never hav prob with cfw b4 when using 6.39.. the battery is full though..donno why it just shut down.. thank u in advance.. btw im using psp3000 with module 4g

hey i guys i have a question my brothers psp is running 6.39 lme-9.1 and he wants to switch to pro because its on mine and likes how it runs its a psp fatboy can we get it back to ofw then put pro on it ? ceribdis.cree@gmail.com to drop me aline let me know thanks works great on my 6.60 psp2001slim vader issue .

Mr Ceribdis Cree

Lots of questions! I have a PSP-3001 with official firmware version 6.60, does this work for it? Are there other details I should know about my PSP before trying this out? Are there things I will not be able use do if I install Custom Firmware, like going to the PSN Store?

I read above that when you install the PRO-CFW on the PSP and turn it off and turn it on again, it won't be there? Is that a problem, how does it work? I don't quite understand the instructions, is there a video tutorial anywhere?

Just run the PROupdate for 6.60 the first time to install it. Then whenever you restart your PSP you'll have to run fastrecovery to enable it.

I'm sorry but I'm REALLY new to this. I just bought a PSP 3004 with version 4.21 installed on it. From what I understood, I can run anything from the above tutorial since my firmware is lower, right?

I also saw another hack called ChickHEN R2, and I really don't know which is better now?

I would really appreciate it if someone can give me some suggestions and help here.

Thanks in advance

I've got a PSP Go running 6.60 PRO-B9. Downloaded the ISOs but shows corrupted data. Tried making an ISO folder (both in ROOT and in GAME.) It either shows "corrupted data" while in GAME folder or nothing at all if in ROOT. Tried it either way, got nothing useful. Any suggestions?

Thanks

@prive

Really up to you what you want to run I prefer PRO myself you could also run ME

@Deep

it is suppose to be on root for iso BTW FOLDER x:\ISO make sure it is psp game and in iso or cso form and I would upgrade to B10

So I just installed 6.20 Pro-B fix. It works and plays games great. But for some reason I can't exit my games normally. Whenever I'm done playing a game, I press the PSP/Home button, then choose Exit game. The PSP goes to a black screen, hangs there and then it shuts down. I tried changing up the UMD IISO mode between M33 Driver, Inforno and the Sony one and none of them fix the problem. I finally upgraded from my 5.50 Prometheus and I install this since this actually has a Permanent patch. So I finally could have a permanent Custom Firmware on my PSP 3000. I was still doing the whole Chicken Tiff thing after every time my PSP accidently shut down.

@randgalan

Thanks for the quick response. Got B10 now. Still trying to get ANY isos working. Assume you're right though...game probably isn't the right type of file...

my 6.60 psp2001slim vader issue is just got sent a cso game and when it goes to load it locks up and shuts off 6060 pro-b10 any thoughts i have ISO folder shows game just wont load

Convert it to iso or try nightly builds the release B10 had a bug for cso

hi i have psp 3001 v5.50 i must update to 6.35 and then update to 6.35pro?

Do programs like CWCheat, Lion Editor (save editor for Final Fantasy War of Lions) and other cheating/save editing programs work with this type of Custom Firmware?

I have a PSP-3001 with 6.60 official and if they do work for it, I will install this CFW in an instant. My PSP is the one that came with the Kingdom Hearts Birth by Sleep bundle.

Thankfully, I found a quick tutorial on YouTube?, BUT, what do I do after place the Fast Recovery in my PSP? How is it used? Does it activate automatically or by pressing L while starting the PSP? Or is it that it starts as Official Software and when you want to use unofficial programs and stuff you switch to the CFW by executing the Fast Recovery? Any details will be appreciated!

I hope you guys have a tutorial if your already in your custom Aftermarket Firmware and wish to update to your latest Aftermarket Firmware... I have the PSP Go witch is 6.20 Pro-B9 with Permanent Patch and wish to update to your Latest 6.20 Pro-B10?? i have no idea how will i do this process.. and what step should i take.. all i see in your guide is if your running on the official firmware only..

@hyper

It is real easy just put Proupdate on internal memory run update on install screen Hold L and hit x should update and go back to xmb

@rand

So no need to uninstall just to be clear i just download the 6.20 Pro-B10 then run the Pro Update and install right away?? no uninstall needed and how about my Permanent Patch from 6.20 Pro-B9? will it overwrite when i run the 6.20 Pro-B10 Update or do i need to Re-permanent Patch my system again using the Pro-B10?? and how about the Fast Recovery.. do i need to reinstall this also?? and when doing an update do i need the "vshorig.prx" on the root of the system right??

Just run the installer and update by holding L trigger and then push x No need to redo perm have updated my 6.20 go almost every change no problems :)

I have 3 questions to ask. Now I'm using FW6.39 PSP-300x with PRO-B6 running on it. 1. What's the different between B6 and B10? I can't find any changes log. 2. Should I update to PRO-B10? 3. If I update to B10, do I need to remove plugin or uninstall CFW? or just put B10 in to Game folder and run Proupdate. 4. What are known issues for B10? Is there any risk? I came across Issues tracker and got confused.

Thanks for answers :)

I think I don't need to delete plugins, just disable plugin before update. Am I right?

You should be fine to jump from B5 to B10 no problems and it would be safest to disable plugins yes then try them one at a time to see if still compatible

Just run installer Hold L trigger and hit x and update as simple as that Most changes are improvements and bug fixes

Thanks a lot, Rand :)

Just finished installing custom firmware 6.60 pro-b10 and wanted to ask: how do I go into recovery mode with this?

In the xmb press select and choose recovery menu from the list.

i just tested 6.60PRO B10 on my brand new PSP Street (E-1004) and works like a charm. thx

Great, CFW 6.60 PRO B10 Activated... I took me long but, I got it now... woohoo!

Can anyone tell me how to play PSX games on 6.60? i copied the .iso to my psp go but it won't appear :(

You can't play psp isos. You have to make an eboot out of them (search on google there are a lot of programs and pages that explain how to use them) and then put that in a subfolder under Games folder (think it's /PSP/GAMES not sure though).

@ Elitolu

First you need to download pops plugin and add-ons, fill them up with files YOU have to rip from FW by yourself because those files are copyrighted and the developers of Pops plugin cant provide them to you, after you have all the pops plugin files ready on your PSP you need to download and install a PSX iso to eboot converter on your PC, convert your PSX game iso to eboot, put it on your PSP in /PSP/GAME/GAMESUBFOLDER/ and enjoy playing.

You can find a tutorial on the whole process on the popsloader plugin development page.

For every ones information PRO has built in pops and plays most converted PSX games you do not need pops loader unless you find a game that will not work so the above is only true for a small hand full of games usually you only need to convert and play :)

I didnt know that so I did it the old fashioned way. Thanks for the info.

hi guys plz help...i installed 6.60 PRO B9 and it worked fine..after few days i turned off my psp...the when i hacked it my psp is restarting!!!! plz help me

Ok will help if I can but first need info

what is it doing exactly what model do you have and if you are on OFW and want back to CFW the use fastrecovery to get back to CFW

I am currently running 5.50 Prometheus on a PSP 1000...How to I change to this CFW? I tried to install the Official FW 6.60 first, but it wont let me.

Ok if possible uninstall Prometheus if not make sure your version.txt is changed or delete it to 5.50 then try to upgrade official then install PRO

But if at all possible uninstall first less likely to cause you problems make sure all plugins are disabled in seplugins before you update to pro Connect to PC changing vsh.txt game.txt and pops.txt 1 to 0

Found the answer here:

http://www.devils-shadow.com/forums/psp-help/278982-cant-upgrade-cfw-5-50-prom-4-6-60-pro-b10.html

how i do tis

Go hear and take a look

http://psx-scene.com/forums/f160/noobs-guide-installing-6-60-pro-b9-custom-firmware-psp-96662/#post935395

wut does this doo all it does is sy strted cfw is on then reboot i no wut 2 do 0] but ya wut it dooooof

I hope you understand me if I am correct when you restart you are on OFW and want to know how to go to CFW again Keep FastRecovery in game folder or put it there again use it when you shut down PSP to get back to CFW PRO

I Found out that if i let my psp(3000 07g) standby when i am playing umd video , the Cfw will broken... Can Anyone Tell my why?

will this work on PSP 3004 with OFW 6.20????

Yes it will work like I have seen a lot hear PRO works on any PSP even seen it working on 11g model that is the new one for Europe only :)

can you tell me the steps for uninstalling PRO-B6 CFW..

If you installed permanent bootloader patch on 6.20 PRO-B6 then run the permanent bootloader patch Read if you have a question "Are you going to uninstall the patch?" and Press X to confirm that you want to uninstall the patch.

After you uninstall the permanent bootloader patch (or if you didnt install the permanent bootloader patch) run the PRO update and press the TRIANGLE button to uninstal PRO-B6 CFW.

And is that procedure the same with all the other PRO-B's... 10x a lot..

Yes.

how do i get in recovery mode wit dis its always in ofw never start in cfw

There is some problem for me. Psp 1004 here. Upgraded to 6.60. Used the pro update tool, and after it rebooted, my psp just hangs at the home screen. Can't move the cursor at al. No up no down no left no right u get the idea. It's like an invisible hold button which comes with your psp. Yes, already check that.

I have tried 6.20 pro b9, 6.60 pro b9 n 6.60 pro b10. All same problem. PLS HELP. Thanks >.< would even appreciate it if you could email me at hermitdudz@gmail.com

@julian press select at your xbm and the menu pops out. U can choose recovery mode there ^^

@ HermitD

Did you disable all plugins ? Did you uninstall CFW before you updated to 6.60 OFW ?

@ julianpe

What version of PRO ar you using ? If your not using 6.20 with permanent bootloader patch you need to run fast recovery every time you reboot your PSP to boot into CFW. While on CFW you can enter recovery menu just like HermitD said.

hello anybody wish answer my ? i have psp go system 6.20 pro b-9 model:05g how would i update too 620PRO-B10 sorry for noob question just download 620-b10 PROUPDATE folder boot in psp and just update ? thanks

since I have answered this before go up page and check nov 14

THANKS

I'm unable to run RemoteJoyLite? v0.19 on 6.60 PRO B-10. Using PSP-2001. Model 02g I think, that's what the system information says when I load up B-10.

Well actually, RemoteJoyLite? works in the XMB, but it hangs when I load a game. Is there a way to get it to run properly?

Maybe if you can recode remoteJoyLite I have not seen a release of RJL for 6.60

@ youxi_pw

The RemoteJoyLite? v0.19 that I have works perfectly with my PSP-2001, Model 02g running 6.60 PRO-B10 on the XMB and while I play a games. On some games RJL won't work but I haven't come across any that don't work.

i hv psp3004 with system software 6.60, i installed 660PRO-B9 all files like CIPL_Flasher, PROUPDATE,FastRecovery on my psp after that execute PROUPDATE file & got update but when execute CIPL_Flasher file mgs appeared This installer does support this model. What could be the reason? Does anybody help in this regard?

You do know that CIPL_Flasher only supports 1G and 2G models so will not work on that model so go with FastRecovery if you turn off psp or maybe roll back to 6.20 if you want a perm

i hv been reading most of the post here. my psp is 1001. this is my first im doing it. what is next after doing it? how can i back up my umd games? thanks to those who will be able to help me in advance...

1. Put the UMD inside your PSP. 2. Press SELECT while in XMB (to view the PRO VSH Menu). 3. Change "USB DEVICE" from "Memory Stick" to "UMD DISC". 4. Plug in your PSP to your PS using the USB cable. 5. Copy the .iso file to your PC. 6. Change back the USB device from "UMD DISC" to "Memory Stick" (so you can acces your Memory stick using the USB cable again). 7. You can play your backuped .iso games by placing them in /ISO/ folder on the root of your memory stick.

@piotrekh...hi thanks for the reply i did what i did as far as installation is concerned but when i am at provsh menu and change the usb device from MS to UMD then exit then the the usb cable to pc it say no memory stick inserted. although there is UMD disc inside. what went wrong? is there another third party software? pls reply asap. thanks again..

i found my mistake. i shouldnot deleted the CIPL_Flasher. now the i can see the iso file and started make backups of my UMD games. lets see how it goes from here...the file is a bit large 504mb. its a socom navy seal game.

thank you the game is working smoothly with no problem at all.

soo, this is the thing, i'm new to getting cfw altogether, so i have a psp 2001 and updated it to sony's 6.60 ofw, so the question to clarify is, download 6.60 pro cfw, make a fldr on the psp called UPDATE and put eboot.pbp inside of it FROM the 6.60cfw fldr, then put the rest of that folder into PSP/GAME then run it? was that correctly stated?

No. You need the UPDATE folder for OFW. You simply put 6.60 PRO cfw Folders (Update and Fast recovery) in PSP/GAME. Then you run PRO Update and proceed with the on screen instructions. After you have updated to 6.60 PRO you will have to use Fast Recovery every time you completely shut down your PSP (lik removing the battery).

where can i get the 6.60 ofw folder?

wait i'm so dumb, isnt a update folder already in the psp itself?

also wher do i find PROUPDATE and FASTRECOVERY download?

lemme sush b/c i finally noticed is everything is on this site, sorry im a noob to this, youre gona have to break it down for me, as if i was a little child.

where exctly need to put these fldrs?

follow my steps darius: 1.connect your psp at your pc 2.navigate to the PSP folder and open it 3.navigate to the GAME folder and open it 4.In the GAME folder put the PROUPDATE and FASTRECOVERY folders 5.disconnect your psp from the pc 6.Go to the game category of your psp then go to the Memory Stick and press X 7.Find the program that has a PRO Update background and press X to launch it 8.After you launched it you have to wait about 3-4 seconds and then a menu will come up.Press X. 9.Some files will be installed on the system.When that is done it will say "Press X to start the CFW".You press X. 10.Your psp will reboot and BAM you have custom firmware on your PSP! 11.Everytime your psp shut's down (not standby mode) you have to launch the fast recovery program.and you will be back to the cfw!

I believe its not hard to do it darius.

This is awesome...!!!!

turns out it worked lol thank you. now for isos

for the isos follow my steps: 1.Download an iso 2.Save it on your pc 3.Connect your psp to the pc 4.Make a folder called ISO in the root of the psp 5.Inside the ISO folder put your ISO game 6.disconnect your psp from the pc 7.navigate to the Game category then memory stick then press X 8.Your game will be showed and you will be able to launch it by pressing X

Enjoy ;)

iso will be hard to dl bc i dont have a file server and dont have money for it.

Google is your friend..... "iso name here" download usually works

virgin psp 1001 with ofw 6.39 only! (that means first timer like me) to check:

0. turn on your psp go to system settings > system information > if system software 6.39 proceed to next step. if not, you need to do your homework like i did and most of all read.

1. download 639PRO-B10.fix1.rar. extract rar file.

files are: /PSP folder/game/ cipl_flasher folder

/ proupdate folder

/ fastrecovery folder

/sdk folder /seplugins folder /credit.txt

2.plug psp to computer(make sure memorystick is in) and turn it on. your psp will be in usb mode.

you will see likely this (this is your psp directory):

removable disk(e):/mproot folder

/music folder /picture folder /psp folder/game/COPY AND PASTE folders cipl_flasher, proupdate and fastrecovery in here.

4. turn on your psp.

5. go to game icon and click the memorystick icon.

6. you'll see cipl flasher for pro-b icon and pro-update icon and a corrupted data

7. click the proupdate icon only and follow instruction and wait.

8. then click cipl flasher and follow instruction and wait.

9. you have succesfully done your homework.

10. go again to your psp system settings > system information > it should say: 6.39 pro-b10.

11. so what now!?

12. read "Comment by piotrekh...@gmail.com, Dec 4 (3 days ago)" and dont forget to thank the wonderful people for helping like you ...enjoy!

The above will work for all PRO for 1G and 2G models BTW Just match the OFW with PRO and follow the instruction :)

hi guys need your help.

after i succesfully modded my psp a week ago - man! how i'm enjoying this! playing games on your MMstick instead of the umd!)

as i said on my previous post its my firstime to modded my psp1001 since i've own this since 2007!(worth the wait)

i'm planning to buy a used psp 1001 in craiglist.

is there a way to test if they have modded thier psp? even if they denied modding it? so i wouldn't be scammed?

if so, what should i check or do? what are the risk? is resetting to default setting will work?

need your expert advice here guys.

thank you in advance! pls reply...

Hey guys I'm running sony's official 6.0 firmware on my psp how do I go about downgrading?

@parehasn... If they perform a full uninstall of any CFW or modifications there shouldnt be any signs of the PSP being modded. There might be some signs of modding if they leave some unoficial files on the PSP's internal Flash.

@wolfma... You can downgrade to the OFW you got your PSP with using a proper downgrader. You need 6.20 or higher OFW to install PRO. You wont be able to install it on 6.0 .

1 Question Guys Gonna buy my psp tomorrow PSP 2000 1.) Do I need to install the OFW before installing this CFW which is given above 2.) Other Instructions for hacking psp 2000 are appreciated :)

1 yes 2 same as Dec 8 post but chose your OFW :) 3 just to let you know most 2000 models can have any OFW for PRO and be Perm like Dec 8 post

Match OFW with PRO CFW to install

So I can go out in a few weeks, buy a new PSP, and I shouldn't have have any problems using this correct?

I was actually looking to buy a custom 2001 from pandorasales pre-installed with 5.00M33-6, but I was afraid that the newer games would be incapable of playing on it, and I would rather have a new system vs used.

PRO works with all models and is easy to install go for new I say

Hi i am using PSP 1000 version and I have successfully updated version 6.60 update and I have checked my version it saids 6.60 pro-810 and the patch is successful as it was mentioned.But I have installed Ridge_Racer?_USA_PSP-Dynarox from the link http://clementpspdownload.blogspot.com/2011/11/ridge-racer-mediafire-links-7zip470mb.html and unzipped it in my computer and send it in game directory in the mem stick pro duo,when I open it with my psp it said "corrupted data" and also several games.My point is the games from the link are really all corrupted or is the hack unsuccessful or my psp has problems.Plz enlighten me. My psp was bought from japan and yes it is japanese.

@ SLIboy If it is a .iso file you need to put it in /ISO/ folder on the root of your MS not in /PSP/GAME/. If it's an unencrypted EBOOT - it will probably not work on your PSP since each PSN downloaded EBOOT is signed for one device only.

Oh i c it worked thx alot.U r really a master :D

Hi I bought a PSP GO with the CFW already installed and a few games on it. But now I downloaded a bunch of ISO games to play, but when I set the PSP to USB and I click on the computer, it shows nothing but shortcuts ... no actual files!!! so I did the options in the folder in case they were hidden but no ... there are no files ...

Please help me ... thank you.

Hi guys i have psp 2000,s and i have version 5.50 prometheus-4.but i cannot play much iso games in it so i want to patch the latest custom firmware (6.39 PRO B10 ) in my psp. Please help me and thank you . (Please send me with clear instructions )

ok death let me give you a brief/tutorial like thingy.first of all you have to install official firmware 6.39 on your system.Download 6.39 from this link: http://www.mediafire.com/?j9igl4di15sz1h4 Update your PSP to 6.39 then follow the instructions above.make sure you also install the CIPL so you can have the PRO custom firmware permanent.

do the CFW's here runs Final Fantasy Type-0? can't get it to run with my current cfw... btw I even don't know what version of cfw i have in my MS My psp's version is 3004 V.6.20

I hope someone responds to my comment ^^

thanks in advance

ありがとうございました!!!

just tried Final Fantasy Type-0 with PRO_B7 still didn't work...

help please ^^

can i directly install the 6.39PRO B-10.fix1 ver before first installing the PRO ver provided on this page on my PSP 3004 V6.39?

i wanna instail pro-b10 on my 1000 can i instail from my 6.39 ME-5? i wanna know cuz im trying to play nanoha on there but it freezes my memory card when i start it thanks

vincent procfw is an amazing custom firmware but you should stay 6.39 ME-5. ME cfw is the best solution for the PSP 1000 and PSP 2000 and for the PSP 3000 and PSPgo the best solution is the procfw.

Can anyone please say me why i cant play games that i downloaded in my psp. My psp has custom firmware 5.50 prometheus -4 .

excuse me download@gmail.com, can u say me how to install CIPL ????

Hey download@gmail.com i downloaded the file that u gave but when i open my psp i cannot see the file and it is written corrupted data. Please give me a solution.(iam have kept that file in PSP-->GAME-->UPDATE)

And can u give me a better link for downloading the OFW

And can u give me a better link for downloading the OFW

And can u give me a better link for downloading the OFW

deathblezed@gmail.com

you are not supposed to put the folders in PSP\GAME\UPDATE.

you are supposed to put them in PSP\GAME

yea you supposed to put the EBOOT.PBP in PSP/GAME/UPDATE(you make this folder) then you put the 6.39 EBOOT.PBP on the UPDATE folder,go to Game,memory stick, then launch the update

how to hack PSP street 6.60 model 011g pro b9 an b10 does not work god does not work what should i do? please reply

hey guys, i bought a new psp 3001 it has v6.60 and its a 9g. ive installed pro b-10 and my system settings confirm its installed but i cant play downloaded games on it, even signed psp games. can anybody tell me the problem???? cutie0020@hotmail.com

it says that the games are corrupted when i try and load them off memory stick

If you downloaded .iso files make sure they are PSP games. you need to put them in the /ISO/ folder on the root of your MS (you can format your MS or create the folder yourself) not in /PSP/GAME/.

i created the ISO folder in mp_root folder but cant find where the game is located. can u help me 1 more time?? im new and would like to take advantage of free games on my psp.

ON the root fo your MS not in a subfolder called mp_root. x:/ISO/ ! not x:/mp_root/ISO/ !

Does it work on psp e1004 model?

i try play metal gear solid peace walker but its always freeze at stage 2. im using psp 3000 6.20 pro b10 03g.

it worked, thanks PRO Team. iso works apps work and emulators work but how do i get CXMB and CTF themes--- i have a psp 3000 on 6.60 pro b9

Hi I bought a PSP GO with the CFW 639 PRO-B installed and a few games on it. But now I downloaded a bunch of ISO games to play, but when I set the PSP to USB and I click on the computer, it shows nothing but shortcuts ... no actual files!!! so I did the options in the folder in case they were hidden but no ... there are no files ...

Please help me, I want to delete some games and add some more, but I can't because I can't access any folder.

Please advise on what to do. Maybe re install the CFW?

Thank you very much.

@adred...@yahoo.com It's The ISO, Get It Patched...

@wolfmanc...@gmail.com CXMB... You can google it, but you need to get the one for your firmware version, same for the themes. i.e. 6.20 CTF Themes are not compatible with the 6.60 CFW with CXMB

@crisc...@gmail.com That Happened To Me Once On My PSP 1000 (6.35 Pro-B10 Fix 1 At The Time). When I Plugged In My PSP To The Mac My Friend Had And Set It To USB Mode, It ed Up My Memory Stick. I Dunno Why That Happened, But If You Still See The Games On Your PSP, Check To See Whether Or Not You Set The Right USB Device. (Memory Stick/Internal Memory/Flash Memory...)

BTW Thanks Pro Team For Making This, I'd Still Be Using ISO To Eboot For My PSPs If It Weren't For you Guys! :3

@ollivier...@gmail.com Unpatched MGS PW works fine. Finished the whole game multiple times on an unpatched ISO. Thats not the problem.

thank u ollivier

when i runing the update it say does not support your FW is what is mean?Please help me!thx

@laualvin...@hotmail.com You neet to update your original firmware to 6.20,6.35,6.39 or 6.60 (your choice which one) and install a matching CFW afterwards.

I need some help please. I recently pulled out my original PSP 1g after about a year, It had version 6.20 from the last time I did and update. I installed version 6.60 but then later found that I could not play games from the internet with that firmware. So I downgraded back to version 6.20 but then when I go to play the games it now says I need version 6.31 or higher. Where do I find that firmware so that I can download it? The stuff I have found says corrupt file when I load it. I am not a hacker and so it takes me a bit to understand things, so please keep it as simple as possible please. Thank you for any help you can provide.

google the firmware

@RSL4Lif...@gmail.com Higher version firmware save files usually dont work with lower firmwares (after downgrading). You should stay with 6.20. Enabling "Use version.txt" in the recovery menu could help your problem since it should show your firmware as 9.90 afterwards (or any other you will define in "version.txt").

What do I do with seplugin folder? Installed the Pro CFW fine and it works but left the seplugin and sdk folder off the card.

sdk (software developement kit) is for developers only. You can put the /seplugins/ folder on the root of your MS if your planing to use additional plugins for your CFW. If not - you dont need it as well.

Is it possible to install PRO 6.60 On PSP 3004?

Yes.

Thanks and how do i do that?

Follow the instruction writen above.

i upgraded my psp from 6.39 to 6.60 and now not even 1 game is working on my psp i have the neccessary CFW and i cracked it too but still it was of no use Can anyone help?

1. Did you match the PRO version with your OFW version (6.60)? 2. Did you install any other CFW before? If yes did you uninstall it? Did you use additional plugins? Did you disable or remove them ? Plugins compatibile with 6.39 usually wont be compatibile with 6.60. 3. Did you check you PSP's model with PSP ident? What is it? (for example My PSP 3004 is 03g model). 4. Is your MS original? Does it support Magic Gate? 5. Did you install the CIPL flasher ?

dear sir(or whatever)pls tell me how to install cxmb themes on psp 660 pro b9 pls pls pls

dear sir(or whatever)pls tell me how to install cxmb themes on psp 660 pro b9 pls pls pls

You need to find a CXMB plugin for 6.60 CFW and 6.60 custom themes. Everything else should be provided in ReadMe? files attached to the plugin and themes.

if you find an incomatibile CXMB plugin it may prevent your PSP from booting. In that case you neet so start your PSP without your MS.

when i load the updater on my psp 1000 it says "Sorry, this program doesn't support your FW(0x05000310).

I was wondering if anyone could explain to me what to do to fix this. I really wanna play monster hunter portable 3rd.

Please and Thank You.

You need to instal OFW of the same version before you install PRO CFW.

so i found something you can directly dl iso directly from your psp calles sneaaky-media.com

I just installed an ofw 6.60 from 5.50 gen-d(full) on my PSP-1000 and wants to install 6.60 Pro10(fix 1) but whenever i press start on the pro installer it always go to a blank screen. What is wrong with it? I could not install the pro cfw? Is there any ways to fix this?

will this work on psp phat(1000)?

Yes you can install PRO on PSP 100x. Did you uninstall your previous CFW first? Did you disable/delete all your 5.50 plugins ? They wont be compatibile with 6.60 and can interefere with the instalation process. Did you match the PRO CFW version with your OFW ?

psp 2000- 6.60. pro installed now bt cant find "iso" folder to copy games... so please helpp...

You need to create it on the root of your memory stick or format your memory stick (just remember to backup your save's and files before you format your MS.

thanks man.. and which sort of files.. this cfw will run.. sorry kinda new to it. i mean iso /cso or both

i have copied both type of files bt still it shows them as corrupted data...

Both.

confirm to work on PSP E1002 (Street)

I'm using OFW 6.60 and CFW PRO-B10 fix 1. But can run only iso, any eboot file appears as corrupted data, no matter if it's on the right place (PSP/GAMES/ANYNAME/EBOOT.PBP). And what's even more strange, the same eboot files that worked before (6.35 and PRO-B3, I guess) now stop working. Any ideas? Thanks in advance!

PSN Eboot's get "installed" and signed for ONE particular PSP. These kind of eboot's wont work on another PSP. Some Homebrew Eboots might simply not be compatibile with the latest CFW. PSX/PSONE images converted to eboot's might not be patched or can be faultly converted.

My Psp Go is 6.37 , i can't access to my recovery menu . Please help me :(

can I install CFW 6.60 Pro-B10 fix to my psp 3001 09g 6.60 OFW?

Guys, I have a PSP-3000 with the CFW fully working, but I want to know if I can use the CIPL Flasher as well to apply a permanent patch. (I have the 09g model).

Nevermind, found out it's not possible. The installer itself even says it's not possible. (To prevent bricking I guess).

Hey download@gmail.com I did What u said placing it even in game folder . But it shows corrupted data . Pleasae someone help me out

Hey can anyone help me how to play games on my 2001 psp. I have 5.50 PROME - 4 .

Where can i download the aftermarket module?please help..noob here

Is there any way for us that have used the CIPL Flasher to start up in OFW mode?

Either Uninstall the CIPL flasher or hold HOME wgile booting up your PSP.

Thank you very much

MY PSP IS PSP-3000 6.60 04g.. is it ok to install the ciplflasher?

No. YOu should read the instruction above: (for 1g and 2g-first gen units only)!

Guys, I have a psp 1006 with 5.50 gen d3 CFW. I'm having trouble installing 6.60 OFW, I tried to Change USB device to Flash0, Opened version.txt using notepad or wordpad, change the 9.90 to 5.50 and save, change the USB device back to Memory stick in vsh menu, Downloaded OFW 6.60, Copied EBOOT.PBP to PSP/GAME/UPDATE/, From the xmb (main psp menu) run the update from Game – Memory Stick, then I get an error - THE SYSTEM CONFIGURATION OF THIS PSP SYSTEM DOES NOT APPEAR TO BE CORRECT. THE UPDATE COULD NOT BE STARTED-(DRNFFFFFFCD). Any suggestions? Thanks

I encountered something like this before. You need to get yourself a MMS and a pandora, run the 5.50 or (better) 5.00 m33-6 from the pandora menu and there you'll have some nand and index keys recovery options - you need to fix those. After you fix those the should be no more peoblems with updateing to 6.60OFW. If you dont know how to od it properly I strongly recoment leavint this for someone that already did it.

first time user here only one hour in and everything was cut and dry easy to install. Great job guys, I had put my psp away because of just trying to keep up to date your project is a dream for anyone who is beginner or advanced will donate soon for sure

Hi guys, I downgraded to 1.50 ofw from 5.50 gen d3, using hellcats recovery flasher. Then I upgraded to 2.81 ofw via umd. Now the problem is that when im trying to update to 6.60 ofw using ofw update on a memory stick, an error shows up - "The system configuration on this psp is not correct, cannot start update". Im using psp 1006. Any suggestions guys? Thanks

Your Nand keys are corrupted. You should use the Pandora battery and a MMS with 5.00m33-6 installer to reapir the Nand keys and region keys as well as your Mac adresses.

hi guys, i gave somebody my new psp 3004pb 6.39 to help me mod for me, he said he was not successful with it so when i collected it back, i found prometheus in the games menu and another chinese game, i also found some games saved data under the saved data utility. The promestheus writes corrupt data if i try to run it. My question is that how do i clear these leftover files (from the first attempt to mod it) because i dont want them interfering with my procfw installation? Will just formatting the memory card & restoring default setting be enough? Could there be some left over files in the internal memory that could interfere with the procfw installation? My psp still runs ofw 6.39. Am a complete newcomer when it comes to psp.

well seguntai i would say to first of all format your memory stick then restoring the default settings.im not really sure what your friend did on your psp while trying to hack it.so im going to say go and try out the PRO CFW for 6.39.Basically download the 639PRO-B10 file at the downloads section.if you have problems trying the pro cfw please tell me so i can help you.

Regards -Alex

@ downloads

Tanxs very much for the reply, i av installed the 6.39 b10 fix and it works gud, no problems @ all. Tanx for your support. I appreciate it. Regards

No problem :)

I got a psp 1000 which i bought a few weeks ago and I want to downgrade fro 6.60 pro b9 to 5.50 prometheus is there any way it could be done as i tried different methods but the files are corupted or require other things my psp module is 01g.

well mr.bladelig. try to search on google: hellcats recovery flasher 5.50 gen-d3. im pretty sure there will be a tutorial. if you dont find one , tell me to help you

-Regards A dude xD

I am completely lost. i have a psp 3000 that runs 6.39 firmware and even with all of the information you guys are giving me I still can't figure this out. If someone can please help me. I'm not sure which files to download, where to download it from, and where to put it on the psp.

Mr.volta first of all i would like to say that this is extremely easy.Download the 6.39 Version for the UMD Models that is above on the tutorial and then follow the tutorial.

Regards -A dude xD

Hi, i'm really new to all this stuff and to my knowledge; i do not have a CFW, I have a PSP-1003 v6.60 . I do not want to risk downloading a virus or i heard that i could "brick" my psp by doing this - where my psp is completely beyond repair. Is this what i need to download to put iso's on my psp and is it safe/does it work? I do not want to risk damaging my psp for a couple of games but it would be nice if it works. PLEASE HELP ME!!! Is this legal aswell?

Mister polbora . The process of installing procfw on your PSP-1003 v6.60 is 100% safe.Yes this is also 100& legal.If you need more help , tell me :P

Regards - A dude

hello i have installed the pro executor but the cipl flasher says installer not compadible with this modle psp 3001 barcode incase it helps: at267530005-psp3001 if you can help send me an email to ms.ca.nub@gmail.com plz cause im lost asof this part

hello I need help with my psp 2003, Im a total noob with this stuff, i hust want to know how could i use my download ISO games. I have 6.20 OFW, i dont know how or what to install, im afraid of bricking my psp. thanks !!

tnx youtube

Every time I make a backup of my UMD I: 1) Press the Select button and "USB DEVICE" set "UMD Disc"; 2) Insert the UMD into the console and connect to the computer; 3) Copy the ISO to your Desktop; 4) Disconnect your PSP and press select "USB DEVICE" set "Memory Stick"; 5) Connect the console to the computer and move the game into the ISO folder on the Memory Stick.

Would not it be easier to create a command that copies the contents of ISO UMD in the Memory Stick directly from the console?

I have a problem. my bf updated his psp 3000 slim to the 6.60 firmware. Now he wants to make it to where he can play iso games. The chickHEN won't work cause the firmware needs to be in the original firmware 5.03? or something like that. Can anyone help me? What can we do to make it work?

Do v need a pandora battery or other thing to crack or we need just d software n I'm nt a pro in cracking so cud u explain me I've got psp 3004 version 6.60

Whoever has a problem can check out this video on YouTube? it 100% works http://www.youtube.com/watch?v=oCINGZpDr9A%26sns=em

The version is good but u need a panorama battery

1 - Hi, I have cfw version 6.60 PRO-B10 but whwn I want to launch the cfw it says "Unknown model 011g" "Completed" "Press X to continue" What is this mean?

2 - Did I really need to install OFW?

3 - CWCheat was not work on my games. I try holding SELECT button but cheat menu was not appear? Why? I have already put cwcheat folder into psp seplugins folder. I also has enable it.

4 - I still cant open recovery menu while opening my psp while pressing R button. Please help me out here.

5 - My psp info: PSP Street E1004, 6.60 PRO-B10, 011g

My PSP is 3000 Model is 04g. My PSP already have 6.39 PRO-B10 can i install this CFW PRO-B9 to my PSP? Will it affect any memories in my PSP?

I'm using psp 3000 6.39 pro cfw B-10 fix1 and when im trying to use psn (via media go) it's telling me to do a system software update. Will this affect my firmware? and if so how could I use media go without installing that system update?

it seems no reply our question... how sad...

Hey the program works great, but I have a few legit UMD's and the PSP can no longer read them. Haven't dropped the PSP and taken pretty good care of it. I haven't used a UMD since December though, so not sure if the event is related to the software. Has anyone else had this problem?

Hi there, I'm a total Noob and confused, would be greatful for some help please.

1. I have a PSP Go, its running software 6.35.

My questions.

1. Do I need to upgrade this to 6.60 before I do anything? 2. Once I have downloaded and installed the appropriate CFW, will the solution be permanent? 3. I'm assuming that the best and latest CFW to use is something called Pro B10? Whats this FIX 1 version I'm hearing about, which one shall i use?

Any help greatfully recieved! :-)

Ok mister uzyta . So : Answers in your questions: 1.Yes you NEED to install firmware 6.60 before doing anything. 2.On 6.60 there is no way to make the PRO-B10 permanent.There's a way on firmware 6.20 but it is very dangerous and i honestly dont recommend it.I recommend you to update to 6.60 and install 6.60 PRO-B10. DONT USE THE CIPL FLASHER ON THE PSP GO!!!!! 3.Yes Pro-B10 is the BEST CFW right now.FIX 1 is basically PR0-B10 just with a fix.I recommend PRO-B10 FIX1.

Hi, thanks for that.

I did actually manage to work it out just after my post, but the one difference is that I left it on 6.35 and Pro-B10 fix1. It all seems to be working perfectly, just wondering if I would have got anything extra by upgrading to 6.60? If so, can i just go ahead and apply the upgrade?

Many thanks once again, much appreciated.

there's no additional extra on 6.60 actually.If you have PRO-B10 on firmware 6.35 then its good.There's absolutely NO NEED to upgrade to firmware 6.60.

I install 6.6 pro-v10 on my psp slim 2003 hackable and I shut it down and now , when i try to restart it nothing goes on exepted my green led. Pandora & magic memory stick black screen no memory stick light flashing. I put the Pandora & magic memory stick in my sons slim 2003 (02g) TA-088v1/v2 as this is the same slim 2003 and i will boot in to the magic memory stick. So i no the magic memory stick and Pandora is ok. Any HELP PLEASE.

One day I open pro update on may PSP and I uninstall it.Then I open the Fast recovery suddenly my psp shutdown.when I open it the green light is on but the screen is block.Pls help me.CAN I STILL FIX IT?.add a comment or send your help to my email account kzedricjoaquincruz@yahoo.com(My real email address) Thank u !!! For Helping me.CAN I STILL FIX IT?OR WHAT CAN I DO TO FIX IT?

Guys , frm where do I hav to download all the aftermarket modules please help

!!

Guys , frm where do I hav to download all the aftermarket modules please help

!!

Hello

I have a psp slim 3004 PB and I have cfw 6.39 PRO-B6. It has been a long time that I didnt touch my psp. I tried to copy a game to my psp but it didnt work it says I need to upgrade?SO I am not sure anymore what to do or if I need to upgrade. Do i need to install 6.39 PRo-B10 or 6.60 Pro-B10?

I upgrade like I installed the first time? DO I lose any of my save games? Thank you in advance!!

Hey, guys, I'm running CFW 6.60 ME v1.7 here (on a PSP 1001) and would like to know if trying to temporarily flash PRO-B10 without using C-IPL Flasher ("temporary" install) would fuck my PSP up? The reason I'm doing this is to get the best of both worlds:

6.60 ME v1.7 = Great compatibility with homebrew and apps. ISO/CSO launcher has some strict standards. 6.60 PRO-B10 = Wide range of ISO/CSO games it can handle. Doesn't give a shit-- consumes all. Homebrew... not so much.

Basically, I don't like being limited in what games I can and cannot play. From what I know, it is possible to run PRO-B9 with ME v1.4, so why would trying to run PRO-B10 while on ME v1.7 be any different? Thanks in advance for any reply, just want to be somewhat sure about myself before running headlong into what may brick my PSP.

P.S. I don't own a Pandora Battery... So bricking is not an option since I don't want to sacrifice my own battery.

Source for running ME v1.4 with PRO-B9: http://www.tjsdaily.com/2011/09/how-to-updateupgradeinstall-psp-cfw-to.html

I'm sure by the time Pro-C Online gets released that it would have pretty much on par compatibility homebrew wise with ME by then with leda and the rest of the non working being compatible by then.

I guess it's all about you guys being patent and waiting for the first build of PRO-C when it's out of Beta.

I believe that PRO CFW is going to make it as Coldbird, Vicious Flame & Neri0n won't stop with PRO-C until it's perfected like the Minimum Edition is now.

It is believed that Minimum Edition 1.8 is codenamed Lightspeed Final which gives indication that it could be the very final version of it.

So, yeah I'd say for the moment grab ME 1.8 first before grabbing a PRO CFW if you were to Dual Boot your PSP.

With N0 finishing ME now I guess he is now free to help with the PRO side with CB & VF full time to get the Online PRO-C perfected on the other features side to make PRO a proper full featured edition version of 6.60 CFW?

I can see this Lightspeed Final thing as a positive to the PRO CFW and a perfected PRO CFW being on the horizon with this extra expertise of a full time 3 man team if the 1.8 being the final ME revision is 100% true because what would one of the most loved developers ne0rion have left to do if he has finished with his own CFW he shouldn't quit as along with Coldbird he is the best developer left right now after Dark Alex/Dark Alek was no more.

Does this void your warranty?

Does this void your warranty?

Does this void your warranty?

Does this void your warranty?

Does this void your warranty?

Does this void your warranty?

Does this void your warranty?

Hi to all,i know this sounds really stupid,but i am really not geared up about this.i am a mother of 5 just trying to get youtube on the psp slim for my kids(the psp was given to me by my bored teenage sister).it seems as if im doing this all backwards,first i put gotube on the psp,then i found out i need cfw to run it,so i followed all the steps on wololo,but instead on my psp it shows that the cfw is corrupted data,am i missing something here?i am updated to version6.60 ofw.i have never put anything else on the psp.can someone please help as i am trying for the last three days and am very frustrated now. and by the way i need a step by step guide,coz it took me a few hours to realise im supposed to do this through the pc.

Comment by download...@gmail.com, Dec 6, 2011 1.connect your psp at your pc 2.navigate to the PSP folder and open it 3.navigate to the GAME folder and open it 4.In the GAME folder put the PROUPDATE and FASTRECOVERY folders (you should find these 2 from the '660PRO-B10.fix1.rar' file you can download under the "download" tab on this site - "download" tab is at the very top of this page) 5.disconnect your psp from the pc 6.Turn on the psp and go to the game category of your psp then go to the Memory Stick and press X 7.Find the program that has a PRO Update background and press X to launch it 8.After you launched it you have to wait about 3-4 seconds and then a menu will come up. Press X. 9.Some files will be installed on the system. When that is done it will say "Press X to start the CFW". You press X. 10.Your psp will reboot and BAM you have custom firmware on your PSP! 11.Everytime your psp shut's down (not standby mode) you have to launch the fast recovery program and you will be back to the cfw!

That should get the cfw all set.

Just to save some people some time:

Upgrade to 6.60 and install the CFW. 6.20 is not recommended because even though it has the permanent bootloader, it is not fully safe to use the permanent bootloader.

I Did Everything But I Didnt Appear In My PSP Game Downloa Area HELP!!!!!!

http://baldassano.blogspot.com ALL YOUR PSP CFW NEEDS & live chatbox HELP

wa

hi...ahm i hav a 6.39 god version...i would like to upgrade my psp to 6.60...is this good or bad?

6.60PRO b is GREAT

also depends on which PSP u have & its perma on 1000/2000 but not perma on 3000/PSPGo

hi people ummm i need some help..! I have a slim psp 3004 with pro b-10...04g model well i really need help in how to download and play games on my psp... really will be helpful if i am helped..:D thanks.....

you can visit my blog & download TONS of stuff & games for ur PSP http://baldassano.blogspot.com

Will it work i insert my memory stick Pro of my PSP in the PC to copy these files??