netbook-installer - Project Hosting on Google Code

Yesterday 29 hours ago Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by rnirnber - thank you so much for the work you guys do, really appreciate it! thank you so much for the work you guys do, really appreciate it! 39 hours ago Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by deberli - @Stefan Brownies Congratulations. You are one of the first to get Snow Leopard going on a D250. Please post a step by step guide or the links to the sites you used and downloaded from. There are still so many open questions. How did you install 10.6.2, I only have a 10.6 retail version? NBI did not do much for me!? What "windows"-keys did you press to enter in Save mode. Where did you get the kext for audio and wifi. I am sure the community would very much appreciate your insight. Thank you for your help. Daniel (deberli- at- google -com) @Stefan Brownies Congratulations. You are one of the first to get Snow Leopard going on a D250. Please post a step by step guide or the links to the sites you used and downloaded from. There are still so many open questions. How did you install 10.6.2, I only have a 10.6 retail version? NBI did not do much for me!? What "windows"-keys did you press to enter in Save mode. Where did you get the kext for audio and wifi. I am sure the community would very much appreciate your insight. Thank you for your help. Daniel (deberli- at- google -com) Last 7 days Dec 31, 2009 issue 42 (Time Machine browser locks up OS) commented on by brovius - Do you have QuartzGL enabled? Maybe it can't view Time Machine if you don't. To enable QuartzGL: defaults write com.apple.windowserver QuartzGLEnabled -bool true Do you have QuartzGL enabled? Maybe it can't view Time Machine if you don't. To enable QuartzGL: defaults write com.apple.windowserver QuartzGLEnabled -bool true Dec 31, 2009 issue 61 (.8.3 broken install after repairing permissions) commented on by brovius - I used NBI 0.8.2 final to install 10.6.2 on my Dell Inspiron 910. BIOS A04, Does have Bluetooth. I have NOT experienced this after repairing permissions. I used NBI 0.8.2 final to install 10.6.2 on my Dell Inspiron 910. BIOS A04, Does have Bluetooth. I have NOT experienced this after repairing permissions. Dec 31, 2009 issue 140 (Hibernate Image file too old by XXX Seconds (Message always ...) commented on by brovius - The same on Dell Optiplex 910, BIOS A04 Mac OS X 10.6.2 NetBookInstaller 0.8.2 final. It says "Hibernate Image file too old by xxx seconds." and something about "ForceWakeUp=y", but because of quiet boot I can't seem to enter it. The same on Dell Optiplex 910, BIOS A04 Mac OS X 10.6.2 NetBookInstaller 0.8.2 final. It says "Hibernate Image file too old by xxx seconds." and something about "ForceWakeUp=y", but because of quiet boot I can't seem to enter it. Dec 30, 2009 issue 177 (Kernel Panic - Unsupported CPU type on boot from USB stick p...) commented on by merrilln - UPDATE ~ Tried the install using iAtkos 7 then NetbookMaker 0.8.3 RC5 and success! You MUST remove the battery or install will fail. I now have OSX 10.5.7 installed and running "mostly"... I have to use an external keyboard and mouse as the built-in ones do not yet work. I also have no wired or wireless access yet and oddly, my USB keys refuse to mount even though they do appear in System Profiler. Will post more as I get further along... UPDATE ~ Tried the install using iAtkos 7 then NetbookMaker 0.8.3 RC5 and success! You MUST remove the battery or install will fail. I now have OSX 10.5.7 installed and running "mostly"... I have to use an external keyboard and mouse as the built-in ones do not yet work. I also have no wired or wireless access yet and oddly, my USB keys refuse to mount even though they do appear in System Profiler. Will post more as I get further along... Dec 30, 2009 issue 34 (restart not works mini 10v, blue screen) commented on by dew912 - Fixed. 8.3 Fixed. 8.3 Dec 30, 2009 issue 20 (SpeedStepping Request) commented on by Meklort - Issue 153 has been merged into this issue. Issue 153 has been merged into this issue. Dec 30, 2009 issue 153 (Speedstep Support for Intel Atom) changed by Meklort - Status: Duplicate Status: Duplicate Dec 30, 2009 issue 106 (Visual Issue with iTunes Visualizer) Status changed by Meklort - Status: Fixed Status: Fixed Dec 30, 2009 issue 58 (Desktop Icon Overlap) Status changed by Meklort - Status: WontFix Status: WontFix Dec 30, 2009 issue 37 (UpdateExtra after replacing a kext in Extra/mini10vext got a...) Status changed by Meklort - Using an SMBios.plist is file will break UpdateExtra. Marking this as wont fix (we don't support using an SMBios plist file). Status: WontFix Using an SMBios.plist is file will break UpdateExtra. Marking this as wont fix (we don't support using an SMBios plist file). Status: WontFix Dec 30, 2009 issue 34 (restart not works mini 10v, blue screen) Status changed by Meklort - Let me know if you still have this issue, otherwise I'm closing it. Status: WontFix Let me know if you still have this issue, otherwise I'm closing it. Status: WontFix Dec 30, 2009 r111 (PostbootMounter changes. 64bit support included) committed by Meklort - PostbootMounter changes. 64bit support included PostbootMounter changes. 64bit support included Dec 30, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by thomasafine - Hey. Microcenter is selling something that they don't call a 10v, but it looks a lot lie the 10v, with the extended 6-cell battery, for $299: http://www.microcenter.com/single_product_results.phtml?product_id=0320528 One thing that I see is different is it says it has a 950 GPU, not a 945. Is this in fact a 10v? Or close enough? Does anyone else have this 950 GPU? Also, I noticed that the Dell website says that the Mini 10 and Mini 10v both support 2G of memory. Is this an easy upgrade? Hey. Microcenter is selling something that they don't call a 10v, but it looks a lot lie the 10v, with the extended 6-cell battery, for $299: http://www.microcenter.com/single_product_results.phtml?product_id=0320528 One thing that I see is different is it says it has a 950 GPU, not a 945. Is this in fact a 10v? Or close enough? Does anyone else have this 950 GPU? Also, I noticed that the Dell website says that the Mini 10 and Mini 10v both support 2G of memory. Is this an easy upgrade? Dec 30, 2009 r110 (Initial work on 0.8.4 (resources)) committed by Meklort - Initial work on 0.8.4 (resources) Initial work on 0.8.4 (resources) Dec 30, 2009 r109 (Initial work on 0.8.4) committed by Meklort - Initial work on 0.8.4 Initial work on 0.8.4 Dec 30, 2009 r108 (Initial work on 0.8.4) committed by Meklort - Initial work on 0.8.4 Initial work on 0.8.4 Dec 30, 2009 issue 20 (SpeedStepping Request) commented on by tillgavaller - With the final release 0.8.3 VoodooPowerMini.kext doesn't work for me. Clean install with Snow Leopard and upgraded to 10.6.2 (BIOS A05). Native Speedstepping with NBI would be totally awesome! With the final release 0.8.3 VoodooPowerMini.kext doesn't work for me. Clean install with Snow Leopard and upgraded to 10.6.2 (BIOS A05). Native Speedstepping with NBI would be totally awesome! Dec 30, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by stefan.brownies - working great on ACER One D250-1dk. (OSX 10.6.2 installed with NBM/NBI 0.8.3 (alpha) uploaded 25th DEC) Never got any KP, 3 days running now. Wifi, webcam, sd/hc, Bluetooth, touchpad and keyboard special keys work out of the box. I use voodooHDA.kext for audio out (internal speakers). Do no work : Audio In, Sleep&Hibernation. working great on ACER One D250-1dk. (OSX 10.6.2 installed with NBM/NBI 0.8.3 (alpha) uploaded 25th DEC) Never got any KP, 3 days running now. Wifi, webcam, sd/hc, Bluetooth, touchpad and keyboard special keys work out of the box. I use voodooHDA.kext for audio out (internal speakers). Do no work : Audio In, Sleep&Hibernation. Dec 30, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by pierre.lespagnard - working great on ACER One D250-1dk. (OSX 10.6.2 installed) Never got any KP, 3 days running now. Wifi, webcam, sd/hc, Bluetooth work out of the box. A voodooHDA.kext required for audio out. Do no work : - Audio In - Sleep&Hibernation working great on ACER One D250-1dk. (OSX 10.6.2 installed) Never got any KP, 3 days running now. Wifi, webcam, sd/hc, Bluetooth work out of the box. A voodooHDA.kext required for audio out. Do no work : - Audio In - Sleep&Hibernation Dec 30, 2009 issue 164 (Ethernet not working properly on dell mini 10v) commented on by jayster4...@msn.com - I have just the opposite issue. Have a Dell Mini 10V and the Ethernet works fine but the WiFi doesn't work at all. I have the DW 1397 card on my PC and haven't attempted to replace it yet to verify the card is good but if I buy a replacement card, would like to know if I install the DW 1510 card if would be compatible with Snow L 10.6.1 installed, What is your advice here? I installed SL using NetbookBootLoader and NBI 0.8.3 RC 5. I have just the opposite issue. Have a Dell Mini 10V and the Ethernet works fine but the WiFi doesn't work at all. I have the DW 1397 card on my PC and haven't attempted to replace it yet to verify the card is good but if I buy a replacement card, would like to know if I install the DW 1510 card if would be compatible with Snow L 10.6.1 installed, What is your advice here? I installed SL using NetbookBootLoader and NBI 0.8.3 RC 5. Dec 28, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by ary.pramudito - hmm my wifi AR5007EG not working on acer aspire one D150-1577 on RC5 hmm my wifi AR5007EG not working on acer aspire one D150-1577 on RC5 Dec 27, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by grazykid - hello, thats great. I still have the same issues as u do. but kinf of gave up hope that they will be fixed... its xmas tho u never know:P hello, thats great. I still have the same issues as u do. but kinf of gave up hope that they will be fixed... its xmas tho u never know:P Dec 27, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by Ilovemontanasnow - Hey Grazykid, Via email I pointed mrfoggy in the right direction. We chatted earlier and he was at 10.6.0. I have been stable for 10 days straight with no kernel panics. I don't have wired ethernet, sleep, or internal mic yet. But everything else is rock solid at 10.6.2. I used NBI/NBM 0.8.3RC4 and the USB install method. My Acer is the D250-1962. Do you have any of the above issues working yet? Hey Grazykid, Via email I pointed mrfoggy in the right direction. We chatted earlier and he was at 10.6.0. I have been stable for 10 days straight with no kernel panics. I don't have wired ethernet, sleep, or internal mic yet. But everything else is rock solid at 10.6.2. I used NBI/NBM 0.8.3RC4 and the USB install method. My Acer is the D250-1962. Do you have any of the above issues working yet? Dec 27, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by grazykid - mrfoggy what kind of netbook do u have? mrfoggy what kind of netbook do u have? Dec 27, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by dmelpi - Any chance to revitalize my old IBM (Lenovo) T60p? Any chance to revitalize my old IBM (Lenovo) T60p? Dec 27, 2009 issue 178 (Installer fails in post-install on EeePC 1005HA) commented on by TheVelocityOfc - was this issue ever fixed? was this issue ever fixed? Dec 26, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by mrfoggy - @Ilovemontanasnow Hi, I've tried NBM 0.8.3 (25dec2009) onto dvd retail SL. After install the system reboot, apple logo comes and than looping reboot. Do you suggest me NBM 0.8.3RC4? How did you manage sl install. Please give me some tips. Thank you yashijoe @Ilovemontanasnow Hi, I've tried NBM 0.8.3 (25dec2009) onto dvd retail SL. After install the system reboot, apple logo comes and than looping reboot. Do you suggest me NBM 0.8.3RC4? How did you manage sl install. Please give me some tips. Thank you yashijoe Dec 26, 2009 issue 181 (Hard disk won't sleep) reported by threeonparfive - What steps will reproduce the problem? 1.Lowered disk sleep timer with pmset to 5 minutes 2.Removed power adapter for 10 minutes 3.Held netbook to ear listening for disk to spin down (never happened) What netbook are you using this on? Dell Mini 10v What is the expected output? What do you see instead? Expecting disk to sleep but it never happens. What version of the product are you using? On what operating system? OSX 10.6.2 / NBI 0.8.3 final Please provide any additional information below. What steps will reproduce the problem? 1.Lowered disk sleep timer with pmset to 5 minutes 2.Removed power adapter for 10 minutes 3.Held netbook to ear listening for disk to spin down (never happened) What netbook are you using this on? Dell Mini 10v What is the expected output? What do you see instead? Expecting disk to sleep but it never happens. What version of the product are you using? On what operating system? OSX 10.6.2 / NBI 0.8.3 final Please provide any additional information below. Dec 26, 2009 issue 35 (bluetooth not visible after install if was disabled in windo...) commented on by dr.kaos - Although low priority, it plagues me as well. Have you found a way to fix this, lacking a copy of Windows and the Dell utility? BT is enabled in the BIOS on my mini9 (v.a05), and I've tried "fixing BT" via DellEFI, but cannot seem to make OSX see that the adapter even exists. Interested in any tips on correcting this! Although low priority, it plagues me as well. Have you found a way to fix this, lacking a copy of Windows and the Dell utility? BT is enabled in the BIOS on my mini9 (v.a05), and I've tried "fixing BT" via DellEFI, but cannot seem to make OSX see that the adapter even exists. Interested in any tips on correcting this! Last 30 days Dec 25, 2009 NetbookBootMaker 0.8.3.app.zip (NetbookBootMaker 0.8.3 (alpha).) file uploaded by Meklort - Labels: Featured Labels: Featured Dec 25, 2009 NetbookInstaller 0.8.3.app.zip (NetbookInstaller 0.8.3 (alpha).) file uploaded by Meklort - Labels: Featured Labels: Featured Dec 24, 2009 NetbookBootMaker 0.8.3.app.zip (NetbookBootMaker 0.8.3 (alpha).) file uploaded by Meklort - Labels: Featured Labels: Featured Dec 24, 2009 NetbookInstaller 0.8.3.app.zip (NetbookInstaller 0.8.3 (alpha).) file uploaded by Meklort - Labels: Featured Labels: Featured Dec 24, 2009 issue 180 (Can't boot after running RC5) reported by 42.matt - What steps will reproduce the problem? 1. start with: 10.6.2, NBI 0.8.3 RC 4 installed 2. ran 0.8.3 RC 5 3. apple logo appears, spinner appears, wait approx 1 minute, circle with line through it appears on top of apple logo, system will not boot. 4. boot into safe mode, re-run RC 5, system will now boot but with sound disabled. 5. re-re-run RC 5 in normal mode to try and reacquire sound, reverts to step 3. What netbook are you using this on? mini 10v What is the expected output? What do you see instead? machine boots/machine doesn't boot What version of the product are you using? On what operating system? see above Please provide any additional information below. What steps will reproduce the problem? 1. start with: 10.6.2, NBI 0.8.3 RC 4 installed 2. ran 0.8.3 RC 5 3. apple logo appears, spinner appears, wait approx 1 minute, circle with line through it appears on top of apple logo, system will not boot. 4. boot into safe mode, re-run RC 5, system will now boot but with sound disabled. 5. re-re-run RC 5 in normal mode to try and reacquire sound, reverts to step 3. What netbook are you using this on? mini 10v What is the expected output? What do you see instead? machine boots/machine doesn't boot What version of the product are you using? On what operating system? see above Please provide any additional information below. Dec 23, 2009 issue 43 (Installation fails on Compaq Mini 700) commented on by T...@TJSHAFER.COM - Same happens with my hp mini 1031 using 0.8.3 RC5 Same happens with my hp mini 1031 using 0.8.3 RC5 Dec 23, 2009 issue 179 (Install stuck in loop.) reported by T...@TJSHAFER.COM - What steps will reproduce the problem? Setup a usb install with .8.3 RC5 What netbook are you using this on? HP MINI 1030 What is the expected output? What do you see instead? Install should complete. I am stuck in a loop, the error log says ./postinstall: cd: /Volumes/ramdisk/dsdt/lasest_dsdl.dsl: No such file or directory What version of the product are you using? On what operating system? I am using 10.6 install dvd with .8.3 RC5 Please provide any additional information below. What steps will reproduce the problem? Setup a usb install with .8.3 RC5 What netbook are you using this on? HP MINI 1030 What is the expected output? What do you see instead? Install should complete. I am stuck in a loop, the error log says ./postinstall: cd: /Volumes/ramdisk/dsdt/lasest_dsdl.dsl: No such file or directory What version of the product are you using? On what operating system? I am using 10.6 install dvd with .8.3 RC5 Please provide any additional information below. Dec 23, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by m.m.novak - How about support for the LG X120's? WiFi is a pain...RealTek 8187SE, or RaLink 2700 Ethernet, Graphics, Cardreader work vanilla... Bluetooth should but for some damn reason it only works once, and then disappears from hardware Sleep... I'm working on ;) How about support for the LG X120's? WiFi is a pain...RealTek 8187SE, or RaLink 2700 Ethernet, Graphics, Cardreader work vanilla... Bluetooth should but for some damn reason it only works once, and then disappears from hardware Sleep... I'm working on ;) Dec 23, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by ori.zelak - Contrary to the table above, the headphone jack works beautifully on my Vostro A90 with the latest release (RC5).. Thanks so much for this! Contrary to the table above, the headphone jack works beautifully on my Vostro A90 with the latest release (RC5).. Thanks so much for this! Dec 22, 2009 Supported_Devices (Table of devices supported by NetbookInstaller.) Wiki page commented on by halhhalh - Hello - For what it's worth, 10.6.1 Snow Leopard-Retail runs on the HP Mini 110. Used the guides/utilities from http://osx.mechdrew.com/guides/. Wasn't as straight forward as I had hoped, but the OS is up and running and I'm currently working on the extensions for audio and wifi/ethernet. Hopefully can get those going soon. I also have an AT&T 3G USB "air card" that I hope to use if all else fails. At any rate, just wanted to let you know that it does work, mostly. Thanks... Hello - For what it's worth, 10.6.1 Snow Leopard-Retail runs on the HP Mini 110. Used the guides/utilities from http://osx.mechdrew.com/guides/. Wasn't as straight forward as I had hoped, but the OS is up and running and I'm currently working on the extensions for audio and wifi/ethernet. Hopefully can get those going soon. I also have an AT&T 3G USB "air card" that I hope to use if all else fails. At any rate, just wanted to let you know that it does work, mostly. Thanks... Dec 22, 2009 issue 172 (I installed it on my Macbook!) commented on by stewart.midwinter - This is not a defect of the software, but of the user. Try deleting the partition that Leopard is installed in, and then recreating it (use GUID Partition type). This is not a defect of the software, but of the user. Try deleting the partition that Leopard is installed in, and then recreating it (use GUID Partition type). Dec 22, 2009 issue 178 (Installer fails in post-install on EeePC 1005HA) reported by stewart.midwinter - What steps will reproduce the problem? 1. Run Snow Leopard Installer using NBI 0.8.3 RC5 2. Installation stops at "Time remaining: 8 minutes" 3. What netbook are you using this on? I'm running this on an EeePC 1005HA What is the expected output? What do you see instead? I expect to see the Snow Leopard installer complete. Instead, it appears to stop with 8 minutes remaining. What version of the product are you using? On what operating system? I'm using NBI 0.8.3 RC5 with Snow Leopard 10.6.0 Please provide any additional information below. When I open the installer log and display errors, I can see the following problem: "./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No such file or device" The installer then repeats this message endlessly. I'm unable to find out how to edit the post-install script to step over this problem, so at this point my request is for you to fix this. I see from forum postings on insanelymac.com that other people with the EeePC 1005HA are also seeing this problem. Thanks! What steps will reproduce the problem? 1. Run Snow Leopard Installer using NBI 0.8.3 RC5 2. Installation stops at "Time remaining: 8 minutes" 3. What netbook are you using this on? I'm running this on an EeePC 1005HA What is the expected output? What do you see instead? I expect to see the Snow Leopard installer complete. Instead, it appears to stop with 8 minutes remaining. What version of the product are you using? On what operating system? I'm using NBI 0.8.3 RC5 with Snow Leopard 10.6.0 Please provide any additional information below. When I open the installer log and display errors, I can see the following problem: "./postinstall: cp: /Volumes/ramdisk/dsdt/latest_dsdl.dsl: No such file or device" The installer then repeats this message endlessly. I'm unable to find out how to edit the post-install script to step over this problem, so at this point my request is for you to fix this. I see from forum postings on insanelymac.com that other people with the EeePC 1005HA are also seeing this problem. Thanks! Dec 22, 2009 issue 177 (Kernel Panic - Unsupported CPU type on boot from USB stick p...) commented on by Ilovemontanasnow - The only way I got this to install was with the battery out (which you have tried). Double check that your USB was Formatted to: Mac OS Extended and as Master Boot Record. I used retail 10.6 and NBI&NBM RC4 on my D250. This is the problem kext I believe AppleACPIBatteryManager.kext when it comes to the battery KP's. The only way I got this to install was with the battery out (which you have tried). Double check that your USB was Formatted to: Mac OS Extended and as Master Boot Record. I used retail 10.6 and NBI&NBM RC4 on my D250. This is the problem kext I believe AppleACPIBatteryManager.kext when it comes to the battery KP's. Dec 22, 2009 issue 175 (no sound after sleep) commented on by spy974 - Thank you. I copied AppleHDA.kext into /System/Library/Extensions/ (thank to the mydellmini forum) and it works like a charm. Thank you. I copied AppleHDA.kext into /System/Library/Extensions/ (thank to the mydellmini forum) and it works like a charm. Dec 22, 2009 issue 161 (Running 'Update Extra' on SL 10.6.2 causes KP after Restart) commented on by l4urence2.uk - No problems on the 10v with bios A04 - same configuration as stated No problems on the 10v with bios A04 - same configuration as stated Dec 22, 2009 issue 175 (no sound after sleep) commented on by l4urence2.uk - confirmed same issue on 10v. replaced the hdaenabler kext for this one (1.0.0d1, Copyright © 2008 by Kabyl) and ran updateextra - sound works again albeit with pops and crackles - I believe this is the voodoo script (attached). I've not yet tested microphone which I also see reported. Otherwise RC5 is brilliant stuff - no issues after updating to 10.6.2 using downloaded combo update. confirmed same issue on 10v. replaced the hdaenabler kext for this one (1.0.0d1, Copyright © 2008 by Kabyl) and ran updateextra - sound works again albeit with pops and crackles - I believe this is the voodoo script (attached). I've not yet tested microphone which I also see reported. Otherwise RC5 is brilliant stuff - no issues after updating to 10.6.2 using downloaded combo update. Dec 21, 2009 issue 177 (Kernel Panic - Unsupported CPU type on boot from USB stick p...) reported by merrilln - What steps will reproduce the problem? 1. Boot from USB stick prepared with NetbookMaker 0.8.3 rc4 and retail 10.6 2. 3. What netbook are you using this on? Acer Aspire One D250 - N270, 1GB RAM, 160GB HD What is the expected output? What do you see instead? Immediate kernel panic on boot from USB stick - unsupported CPU type What version of the product are you using? On what operating system? NetbookMaker 0.8.3 RC4 and retail 10.6 or iAtkos 7 Please provide any additional information below. Trying to install 10.6 from USB stick on my Acer Aspire One D250 - N270, 1GB RAM, 160GB HD. I have attempted to install several times using both retail 10.6 and iAtkos 7 with the same results each time. I have removed the AppleIntelCPUPowerManagement kexts and replaced with NullCPUPowerManagement kext which gets me a bit further with no kernel panic but then hangs just before the main install screen is supposed to appear. I have tried the remove battery trick to no avail. Each time it hangs, if I press the power button briefly, the mouse pointer changes to the spinning beachball and then nothing. What steps will reproduce the problem? 1. Boot from USB stick prepared with NetbookMaker 0.8.3 rc4 and retail 10.6 2. 3. What netbook are you using this on? Acer Aspire One D250 - N270, 1GB RAM, 160GB HD What is the expected output? What do you see instead? Immediate kernel panic on boot from USB stick - unsupported CPU type What version of the product are you using? On what operating system? NetbookMaker 0.8.3 RC4 and retail 10.6 or iAtkos 7 Please provide any additional information below. Trying to install 10.6 from USB stick on my Acer Aspire One D250 - N270, 1GB RAM, 160GB HD. I have attempted to install several times using both retail 10.6 and iAtkos 7 with the same results each time. I have removed the AppleIntelCPUPowerManagement kexts and replaced with NullCPUPowerManagement kext which gets me a bit further with no kernel panic but then hangs just before the main install screen is supposed to appear. I have tried the remove battery trick to no avail. Each time it hangs, if I press the power button briefly, the mouse pointer changes to the spinning beachball and then nothing. Dec 21, 2009 issue 176 (Internal Microphone not functioning with RC5) reported by j...@martinsweb.org - What steps will reproduce the problem? 1. Any use. After fresh boot or after sleep What netbook are you using this on? Dell Mini 9 What is the expected output? What do you see instead? new AppleHDA included in RC5 "internal" microphone does not work. When I plug in an external mic it does work thru that external mic. What version of the product are you using? On what operating system? RC5 on 10.6.2 Please provide any additional information below. Speaker and Headset work fine. External Mic works fine. Internal Mic does not function. When I click on it in pref's it shows a quick flash of "sound" and then goes dead. In the meantime I installed the AppleHDA that is I believe build 243 of voodoo...one one with the pops and clicks and it is working fine. What steps will reproduce the problem? 1. Any use. After fresh boot or after sleep What netbook are you using this on? Dell Mini 9 What is the expected output? What do you see instead? new AppleHDA included in RC5 "internal" microphone does not work. When I plug in an external mic it does work thru that external mic. What version of the product are you using? On what operating system? RC5 on 10.6.2 Please provide any additional information below. Speaker and Headset work fine. External Mic works fine. Internal Mic does not function. When I click on it in pref's it shows a quick flash of "sound" and then goes dead. In the meantime I installed the AppleHDA that is I believe build 243 of voodoo...one one with the pops and clicks and it is working fine. Dec 20, 2009 issue 175 (no sound after sleep) reported by spy974 - What steps will reproduce the problem? 1.Install NBI 0.8.3RC5 2.Reboot (sound work) 3.Go into Sleep mode 4.Get back from sleep (no sound) What netbook are you using this on? Mini9 What is the expected output? What do you see instead? Sound playing anytime. What version of the product are you using? On what operating system? Leopard 10.5.8 Please provide any additional information below. What steps will reproduce the problem? 1.Install NBI 0.8.3RC5 2.Reboot (sound work) 3.Go into Sleep mode 4.Get back from sleep (no sound) What netbook are you using this on? Mini9 What is the expected output? What do you see instead? Sound playing anytime. What version of the product are you using? On what operating system? Leopard 10.5.8 Please provide any additional information below.

issue 177 (Kernel Panic - Unsupported CPU type on boot from USB stick p...) reported by merrilln - What steps will reproduce the problem? 1. Boot from USB stick prepared with NetbookMaker 0.8.3 rc4 and retail 10.6 2. 3. What netbook are you using this on? Acer Aspire One D250 - N270, 1GB RAM, 160GB HD What is the expected output? What do you see instead? Immediate kernel panic on boot from USB stick - unsupported CPU type What version of the product are you using? On what operating system? NetbookMaker 0.8.3 RC4 and retail 10.6 or iAtkos 7 Please provide any additional information below. Trying to install 10.6 from USB stick on my Acer Aspire One D250 - N270, 1GB RAM, 160GB HD. I have attempted to install several times using both retail 10.6 and iAtkos 7 with the same results each time. I have removed the AppleIntelCPUPowerManagement kexts and replaced with NullCPUPowerManagement kext which gets me a bit further with no kernel panic but then hangs just before the main install screen is supposed to appear. I have tried the remove battery trick to no avail. Each time it hangs, if I press the power button briefly, the mouse pointer changes to the spinning beachball and then nothing.

What steps will reproduce the problem? 1. Boot from USB stick prepared with NetbookMaker 0.8.3 rc4 and retail 10.6 2. 3. What netbook are you using this on? Acer Aspire One D250 - N270, 1GB RAM, 160GB HD What is the expected output? What do you see instead? Immediate kernel panic on boot from USB stick - unsupported CPU type What version of the product are you using? On what operating system? NetbookMaker 0.8.3 RC4 and retail 10.6 or iAtkos 7 Please provide any additional information below. Trying to install 10.6 from USB stick on my Acer Aspire One D250 - N270, 1GB RAM, 160GB HD. I have attempted to install several times using both retail 10.6 and iAtkos 7 with the same results each time. I have removed the AppleIntelCPUPowerManagement kexts and replaced with NullCPUPowerManagement kext which gets me a bit further with no kernel panic but then hangs just before the main install screen is supposed to appear. I have tried the remove battery trick to no avail. Each time it hangs, if I press the power button briefly, the mouse pointer changes to the spinning beachball and then nothing.

Yesterday

Last 7 days

Last 30 days