How do I launch NetworkSelector ? From what I understand here, it is part of the DMG.

I just downloaded "PROSet/Wireless 2200b/g and 2915a/b/g OS X 10.5 SVN latest" and noticed that when i opened the dmg on my mac, there is only the package and no Network Selector. Is there another way of getting this?

As federalhotdog said there is no netselector in the pack

To those concerned about missing NetworkSelector: You have to install the package first, and it will be listed under Applications. On mine, the NSGUI app doesn't work, but the command line Network Selector works fine.

Anyhow, when you open the DMG, all you see is the install package. Install it, THEN look for Network Selector. :)

but it doesn't work properly from the latest version of 2200 bg, mates, pls help or anyone has earlier versions which works well??

If you want to extract the NetworkSelector from the install package, control click on it and hit Show Package Contents, then look for it in Archive.pax.gz

I have a 2200 bg wireless adapter on my dell, and network selector sees the SSDI, but when I enter the wep key, it say bus error and terminates. any thoughts?

it's keep showing like the following...

Welcome to the insanelyMac SpacePort?? 0.1

1) Turn card on/off 2) Start scan 5) Close Program 0) Refresh

Enter Option:

networks found: 1) 00:19:e3:e5:22:63 ('Apple Network e52263') cap 401 hw 3 ch 1 2) 00:18:39:84:4b:07 ('sh84028087') cap 401 hw 3 ch 6 3) 00:1e:c7:73:0b:a9 ('2WIRE482') cap 431 hw 3 ch 6 4) 00:1a:04:f9:d0:39 ('2WIRE646') cap 431 hw 3 ch 6 5) 00:04:e2:d8:77:e8 ('Chua') cap 431 hw 3 ch 6 6) 00:16:b6:ed:66:47 ('linksys_SES_59942') cap 411 hw 3 ch 11 7) 00:18:f8:d7:30:41 ('KSK') cap 401 hw 3 ch 11 8) 00:1a:c4:53:ea:71 ('2WIRE595') cap 431 hw 3 ch 6 9) 00:1a:c4:c5:9b:79 ('2WIRE774') cap 431 hw 3 ch 6

type unsecure network number to associate or 0 to return trying to associate Welcome to the insanelyMac SpacePort?? 0.1

1) Turn card on/off 2) Start scan 5) Close Program 0) Refresh

i am using Intel 4965AGN with kalyway 10.5.2. i can see wireless network list like shown above.but can't connect..can someone help me?

todo flota en el aire;

After installing iwi3945, I started the networkSelector and received the following error:

"Could not get ID for kernel control. 2 logout completed?"

What can I do from here?

I have the same problem as J.Hlibichuk, and I really don't know what to do.

Except I installed the iwi2200.

J.Hlibichuk, I had the same problem, but then I found out I was using the osx tiger version, just download the version which belongs to your OS

Hi, Im using intel iwi 3945 and never found any nsgui.app after installation. I have a single file "networkSelector", which seems to work :

- I can't turn wifi on or off. - I don't see any (3) or (4) option, only 1-2-5, 1 not working - But... I can see networks !! How exciting, as I never had kernel panics, and never saw anyone reporting network list under 3945 driver.

But... Trying association does nothing, except return to back menu.

How can I find how to make it work ? I'm not a Mac Programmer but I have good. roots.

Help me...

c_cool_la_vie3, at yahoo (.fr)

Networkselector 3945 is NOT included with the latest iwi3945.dmg. Where can I get the correct version ? thx suurban berlin

Hello, I have a Dell Inspiron 1520 with Intel 4965, so I installed iwi4965. The system boots normally and I can see my wireless card in Network. Then I do a scan with networkSelector and it reveals my wireless network correctly, but when I try to connect to it, it shows "Trying to associate" and it returns to main menu without connecting. The network is without WEP. Any help?

Hello, I installed the iwi4965 and hte system boots normally, but when I open the networkselector it does not come up with any options. It only says:

Last Login: d m t on ttys000 /Applications/networkSelector ; exit; Macintosh:~JMAC$ /Applications/networkSelector ; exit; Could not get ID for kernel control. 2 logout

completed? So what does this mean and how can it be fixed? I did make sure the the NetowrkSelector? was the correct version with iwi3945 and os x leopard 10.5 So i'm not sure what to do from here. Thanks :)

I have the same problem as most people. I downloaded the correct iwi4965 driver for 10.5 and when I run NetworkSelector I get "Could not get ID for kernel control. 2". AirPort? Wifi does not appear in my system preferences either. Pleeeeeze college is coming up soon and I really want this! lol -MotoX- aka -trf-

Hello, I installed iwi3945, no problems during installation or after rebooting (nor kernel panics or anyother things), but: 1. My system does not detect any wifi car, nor airport or other 2. When I try to run NetworkSelector, it happens the same to JCalhoun.ajmac: "Applications/networkSelector ; exit; Could not get ID for kernel control. 2 logout" What should I do?

Quote: Comment by pmsHarlequin, Jun 08, 2008 I have a 2200 bg wireless adapter on my dell, and network selector sees the SSDI, but when I enter the wep key, it say bus error and terminates. any thoughts?

I'm getting the same thing. If i use NS thru terminal i get BUS ERROR after entering the wep key. Or if i use the NSGUI i click connect after hightlight my access point but after i enter the key, i get a loading circle and then nothings happens :(

And after i intalled the IWI drivers, my network preferences screen crashes/closes within 3 seconds of me opening it.

Does anyone have any suggestions?

Thanks in advance!

"Could not get ID for kernel control.2 logout",so anyone tell me why? and how to do then?

menuda mierda de wifi.......

I have iDeneb 10.5.5 working out of the box on my HP DV9312tx except for the Input Device for Audio(Conexant) and the Wifi (Intel Pro Wireless 3945ABG) I had tried the latest DMG fir iwi3945 it asked me for the ethernet 2 also and had added to the network settings also. But i was not able to do anything further. The DMG doesn't include the network selector so was not able to see the working also. Please Help if anyone has solved this issue.

Hi, ive got a Intel Pro Wireless 4965Agn with bluetooth so i downloaded the 4965 driver for my Hp dv2700 with Mac OsX 10.5.2 Installed with iatkos 2.0i .... i did everything that you guys say and i got this

networks found

1) 00:1e:e5:2f:43:ff ('dipietrowifi') cap 411 hw 3 ch 11

then i put 1 and it says Trying to associate >> S:

Thanks for help.

Can somebody provide detail instructions on how and where to install the Network Selector and how to install the driver?

I have the Intel 4965. I have the same problem as the majority of people. The installation went fine. It rebooted normally. It detected the network connection. When I run Network selector I have only option 1, 2, 5, 0. With Option 2 I see my network, I select it but does not associate with it nor asks me for the password to connect to.

Any help on how to make it work will be greatly appreciated.

ditto 4965 - I was so happy to see it detect networks however, cannot seem to get anything to associate. it just goes back to the main menu?

I have the same problem as shellina.damji. What do I do?

Hello, I installed iwi3945, no problems during installation or after rebooting (nor kernel panics or anyother things), but: 1. My system does not detect any wifi car, nor airport or other 2. When I try to run NetworkSelector, it happens the same to JCalhoun.ajmac: "Applications/networkSelector ; exit; Could not get ID for kernel control. 2 logout" What should I do?

any luck? i too am having the "trying to associate" problem. 4965 intel pro. dell 1420. please help.

Muchos tnemos el mismo problema con el driver iwi4965 "trying to associate" ¿Por qué no nos ayudan?

Hello,

i have iwi3945 and when i setup the iwidriver nothing appear after restart and when i open the network selector it says :

Last login: Fri Jan 2 23:04:25 on console /Applications/networkSelector ; exit; Unknown-00-1a-80-24-ce-af:~ elamrihedi$ /Applications/networkSelector ; exit; Could not get ID for kernel control. 2 logout

completed?

any help !!

thanks in advance

so nobody knows how to connect to a network. I too see networks, but can't associate to any of them. I also get Welcome to the insanelyMac SpacePort??? 0.1

1) Turn card on/off 2) Start scan 5) Close Program 0) Refresh

Developers care to help out?

I had the "Could not get ID for kernel control" problem. After I updated from Kalyway 10.5.2 to 10.5.6, this problem was solved. However, since - as far as I understand - only unencrypted networks are possible to connect to, this whole thing is quite useless, isn't it? Correct me if I'm wrong!

Sincerely yours chris

For those who want to know how to update: Check out http://forum.insanelymac.com/index.php?s=1130d4890e1e9ea0f2ac09bb00a3ac5a&showtopic=109102 (however, I updated to version 10.5.6, not to 10.5.5 as mentioned in the tutorial)

Sincerely yours chris

Like FranzJagt?, I updated my Kayway from 10.5.2 to 10.5.5. It fixed the 'Could not get ID for kernel' issue for intel 3945 driver. However, I was unable to connect to a 'secure' wifi, nor did the 'trying to associate' work..

Anyone else?

Is NetworkSelector accepting secure (WPA, WPA2) connections already?

I can't seem to associate with an network with no security with this. I can see my nearby routers, but it won't connect.

drumthrasher109@gmail.com

hello,

I would like to thank you guys for the hard working and the effort u giving to get our Wireless Card Works on Mac OS X,so I'm one of this tragedy I love Mac OS and can't afford to to buy mac Book laptop, Therefore I'm using fujitsu siemens ( AMILO Pi 1556)and my wireless card is 3945abg, as I can see a lot people been wining or killing themselves to get it Work and me I'm willing to kill myself to get it work on Mac OS :), anyway If anyone Get 3945abg working on this mac can u plz share your experience and how u get it work.

I download it 3945abg and followed the instruction giving by the webmaster and when it's come to NetworkSelector it seems the app can see my wireless card, it's just show the following: Wellcome to the insanelyMac SpacePort? 0.1

1) Turn card off/on 2) Starscan 5) Close Program 0) Refresh

Enter Option: and when i choose 2 it says Network found: anyone to assist me please :)

first off thank you for your effort! For the most part everything is working, I chose my unprotected netork from the scan list it reports "Trying to associate" for a split second then goes to the main menu. appart from that, is there something else that i need to do to get it to work? ok, thank you!

btw... its an intelPRO 4965agn

Hi, there, it's been some time already. When are you guys planning on developing the secure connections (WPA and WPA2) for Network Selector?

has anyone yet found a way to connect to networks using w3945abg? thank you.

I as well have the 1, 2, 5, or 0 option on my network selector.

I cannot connect to the internets I am running 10.5.4

Its showing my router and gets ip adres but after that NO INTERNET CONNECTION. Is it driver or computer ? (10.4.5.,2200 b/g)

if it does'nt work for me...and others, then its a piece of crap (sorry)

I'm note getting any networks found. How do i know if the card is on or off? I too have a w3945 and would like to get this working asap.

For the people who shows the message "Could not get ID for kernel", you should change "IO80211Family.kext" for "IO80211Family.kext.origin".

En español. Para los que les salta el problema de "Could not get ID for kernel", hay que cambiar el archivo "IO80211Family.kext" por "IO80211Family.kext.origin", para eso lo mas sencillo es usar el kext helper.

un saludo

I download dmg for 3945abg, after install, I could not find where to start networkselector, please help. Thanks.

Hello, i've an acer 6920g whit an intel wifi 4965agn. whith ideneb 1.5.1 osx 10.5.7 in dualboot. i dowloaded the dmg for 4965 and intall it. After the reboot i don't find network selector nowhere. so i download nsgui from another link. When i run it, nothing happened and if i run it after the right clik and show content it gave me the message "Could not get ID for kernel". After that, i try to change "IO80211Family.kext" for "IO80211Family.kext.origin" but when i rename it, it gave me the message that i don't have the permision to do that. Someone can help me? Sorry for my english...