I installed the 3945 driver and my system crashed. I was unable to restart the system. So I have to re-install. Is that a normal problem? If you please can respond me in my e-mail.... andre@thinnet.com.br

I am crazy looking for this driver... Sorry for my poor english!

Same thing here - crash after install, no need to reinstall - boot dvd, in terminal uninstall as instructed...

Same thing here - crash after install, no need to reinstall - boot dvd, in terminal uninstall as instructed...

same thing here

same thing here

Worked like a charm on my Gateway M275 Tablet with the 2200BG. Nice work!!

Worked like a charm on my Gateway M275 Tablet with the 2200BG. Nice work!!

Worked like a charm on my Gateway M275 Tablet with the 2200BG. Nice work!!

2200 Works fine but still has same old Problem! Cant work with Encrypted network Even i disable brodcast NW for security reason and i could not connect the NW is anyone working for Encrypted to work? Thanks

2200 worked great...until I restarted, now it doesn't work anymore...any suggestions? toney.colin@gmail.com Thanks

2200 worked great...until I restarted, now it doesn't work anymore...any suggestions? toney.colin@gmail.com Thanks

2200 worked great...until I restarted, now it doesn't work anymore...any suggestions? toney.colin@gmail.com Thanks

2200 worked great...until I restarted, now it doesn't work anymore...any suggestions? toney.colin@gmail.com Thanks

2200 worked great...until I restarted, now it doesn't work anymore...any suggestions? toney.colin@gmail.com Thanks

2200 works for me (10.4.3). I'm very happy!But ... because my wlan does not turn on automatically,is there a method to force networkSelector to turn on it after login? I have an hardware switch but it doen not work properly on macosx86.

thanx very much.

when is 395abg gonna work

hi! i´m tried to install but my 3945 abg wireless don´t work. we know when u´ll have a revision of this pack installation? thanks...great job!!

I installed the 3945 driver and my system crashed. I was unable to restart the system. So I have to re-install.

Same thing here, HP 2415US with Intel 3945abg, after the driver installation, the system crashes.. damn;

For all who are having the crash problem, I had the exact same problem, you DON'T have to re-install, to fix this there are two ways to fix it without reinstalling: 1. boot from os86x install cd, when you get to the install page, on top choose utilities->terminal, then type in: rm -rf /System/Library/Extensions/iwi, now reboot regular, you should be fine. 2. boot from ubuntu cd, do apt-get install hfsutils, mount -t hfsplus /dev/partition? /mnt/mac, rm -rf /mnt/mac/System/Library/Extensions/iwi, now reboot

this will get rid of the driver and not cause the crash.

the command that post kaaspad to remove without a reinstall of mac dont work, plz finish the driver for 3945, i have a lenovo v200 3000 and i cant load the drivers because it got me crashes anytime T_T

Plz Help T_T

I installed PROSet/Wireless 4965a/g/n on my Built-in mini-PCI Intel® PRO/Wireless 4965 802.11A/G/N Wireless and my system crashed too. Unable to boot again...

idem.. i've a r50 ibm laptop with 2100 pro wireless.. osx 10.4.7 i've tested iwi3945 .. crash.. then iwi2100 .. crash then iwi2200 .. crash..

sob.. crash :(

Hi, I also have the intel Pro/wireless 2100 card. I tested it with mac os x 10.4.8 on my Acer travelmate 6 type. (BTW, it works faster then windows xp, and runs with sound and good graphics) but no ethernet or wirelless.For the ethernet problem I use IONetworkFamily.kext wich works. But i really want to get that wireless internet too, so i tried the iwi2100 wich did ligthed up the network card but it didn't become a network port in the preference "network" of mac os x. So i guess that's why the network selector crashed when i tried to list the wireless networks. ( Mac os X self, didn't crash , so that's oke ). Anyway I would like to help out by testing new drivers for the 2100 card. you may send them to the follow adres "fffffff123456789@hotmail.com". And then one more thing , it's probably quit stupid to ask, but is there a way to install a linux driver on mac os x ? Or does it have to be recompiled and rewritten ? thx

Keep up the good work:)

Install the iwi4965.dmg cause me lost the HD boot. It's says something like "Can not fild com.apple.Boot.pList" when I use DVD to boot.

I'm installing Leopard on my Toshiba Laptop which has an intel4965agn in it, and patched with BrazilMac? files.

Also when I use kextload -t to load the driver, it make it freeze.

I'm trying to rm -f iwi4965.kext from Terminal, and reboot, still don't boot.

It didn't work for my laptop.

Same crashes for me with Leo (ToH RC2) on a Toshiba P200 (4965AGN).

It does not work for me (2200 on Thinkpad T42). It can scan and get network list, But I don't know how to specify the WEP or WPA key. any idea?

re: intel 3945abg wireless pro/set

luckyly my system didn't crushed and it reboot normally tough once it says so that system crashed with panic symol at start up, but reboot again solves this problem. then it works as it described here in. net work preference shows new adaptor, with messege got new port and listed ethernet slot pci8086 and then nothin....until now no operation, wireless led dosen't wake up for once.

network selector dosen't work, it's operation hang when tried to lunce.

Thinkpad x31 Intel 2200bg Installed iwi2200svn

Everything worked great as far as activating the card, and it can see available networks. But when I type in my wep key, it cannot get a valid dhcp address. Will only get 169.254.253.109.

I should also mention that it DOES connect if I turn off encryption. I have a d-link di-624 router.

WPA personal security doesn't work at all. It never even asks for key, but when I disable the key on my network, it works fine.

Dell Latitude D820 3945 with Leopard 10.5.1. Panic's and first time it removed my Darwin Bootloader.

I patched my Hard drive with EFI 8.0 and GUID partition. I have PrePatched? BrazilMac?'s Installed on First partition and Vanilla Leopard on 2nd partition. Both OS's updated to 10.5.1.

Both have NVinjectGO for the Graphics.

Rest of the D820 is pretty much the same as any other D820.

Hopefully with all that I have written here the driver can be updated or fixed. Once that is done I will donate!!

hi, i have installed the 2100 on my intel centrino.....and now i don't know why don't want to open the nsgui!!!!!!!.....please help me.....the software nsgui don't work.......what's the problem?

It's crash on my Leopard after completed installation :( good project but it should be more stable than now.

someone have news for the intel wireless card of the travelmate 290?.....it's the 2100......please if it's ok.....tell me something......bye

same thing here too!!!!!!! 3945 made my 10.5.1 crashed

I had Kalyway leopard 10.5.1 crashed no go.

I cant set my SSID , Why ???

My Kalyway leopard 10.5.1 crashed also becouse the 4965AGN driver...

i am using Leopard on laptop integrated wireless 2200abg. I really need wireless connection, but it's not available now. Does anybody know when it will be release?

Much appreciated!

quote... I'm also using Leopard but this driver (iwi2200) don't works.

no need

For all who are having the crash problem, I had the exact same problem, you DON'T have to re-install, to fix this there are two ways to fix it without reinstalling: 1. boot from os86x install cd, when you get to the install page, on top choose utilities->terminal, then type in: rm -rf /System/Library/Extensions/iwi, now reboot regular, you should be fine. 2. boot from ubuntu cd, do apt-get install hfsutils, mount -t hfsplus /dev/partition? /mnt/mac, rm -rf /mnt/mac/System/Library/Extensions/iwi, now reboot

this will get rid of the driver and not cause the crash.

just:

-s
mount -a 
rm -rf /System/Library/Extensions/iwi* 
reboot

Hi , I'm using 10.4.8(Jas) , this driver(iwi2200) is works on my nx8220, but when I chose Restart , my Lapi goes to black display and stop . I must press Power button to shut down . Please help me to fix that .

3945abg support need!!!!! any news????

395 driver network selector error on tiger. if I install i get many language reboot screen as soon as startup. any info I appreciate a mail psychosonic_00@hotmail.com IM WILLING TO PAY FOR A GOOD DRIVER i have Intel(R) PRO/Wireless 3945ABG Network Connection

Last login: Sun Feb 3 09:32:14 on console /Users/Xsonic/Desktop/networkSelector; exit

Welcome to Darwin! xsonics-computer:~ Xsonic$ /Users/Xsonic/Desktop/networkSelector; exit Could not get ID for kernel control. 2 logout completed?

IM WILLING TO PAY FOR A GOOD DRIVER i have Intel(R) PRO/Wireless 3945ABG Network Connection TOO

Reporting: Boot error on Kalyway 10.5.2 w/ 3945ABG (Lenovo 3000 V100). I was able to repair the instalation from -s mode by removing the extensions. Keep working on it guys. Thanks.

I've installed PROSet/Wireless 3945a/b/g OS X 10.5 IOEthernetController on my iATKOS 10.5.1 Leopard, but it crashed.

Trying to install 2200bg on osx86 10.4.1 on Gateway 8510gz; Installer runs fine, no crashes. However, NS will not run, GUI or otherwise.

Also: 3) Mount the DMG file you have downloaded 4) Copy the matching version of NetworkSelector to a place that is easy to remember and run it to configure your card 5) Open the package in the newly mounted drive to load the installer program.

I don't understand how to perform step 4.

Not a noob, but not extremely experenced, just need assistance...any would be greatly appriciated.

2200bg worked perfectly on ACER travelmate 2420, Tiger 10.4.10 thx for everyone

Hello same as aaroncov,

when i launch the networkSelector I get : Could not get ID for kernel control. 2

DELL D630 (intel 3945a/b/g)

KALYWAY 10.5.1 + combo 10.5.2

When I run network selector i get the message "Could not get ID from kernel control. 2 " and my OS is Kalyway 10.5.1. someone please help. I have a Dell 9300 with intel Pro 2915 a/b/g

same. install, cant boot, had to reinstall, GAY

i... WANT ... wireless!!!

Hello all. Install went fine. but it seems like it cycles my card on and off. in nsgui it shows my network (unencrypted) when i press connect it says scanning then getting ip, then it cycles from scanning to getting ip constantly. PLEASE HELP

am not able to download the Intel 3945 Driver i think the download link is broken.

I have an Intel 3945 on-board.

I too had nothing but crashes after loading iwi3945.kext but was able to remove it using the removal instructions below...

I'm going to try the 2200 for fun next....

INSTALL INSTRUCTIONS

1) Installed iwi-3945 per instructions

2) Rebooted to install DVD

3) Utilities, Disk Utility, Repair Disk Permissions (nothing changed)

-- this step was just for good measure

4) Utilities, Terminal

cd /Volumes/<volumename>/System/Library/Extensions chown -R root:wheel iwi3945.kext chmod -R 755 iwi3945.kext cd .. rm Extensions.mkext kextcache -k /Volumes/<volumename>/System/Library/Extensions

5) Rebooted to Leopard

!!! GSOD - Grey screen of death !!!

REMOVAL INSTRUCTIONS

Hit enter at boot prompt

-s

mount -a

rm -rf /System/Library/Extensions/iwi

rm /System/Library/Extensions.mkext kextcache -k /System/Library/Extensions

REBOOT to Leopard

iAtkos v1.0i Dell Latitude D620 (Multi-CPU disabled) Intel 3945 Wireless Sigmatel 9200 series nVidia Quadro NVS 110M

my t61 crashed as well

Keep The good work Guys! hope to se a Intel 3945abg driver working soon!

IWI 2100 on HP Compaq nx5000(upgraded to 1,2GB ram,100gb hdd) and 10.4.7 JaS killing kernel...on starting there is only screen : You need to reboot! and thats all, after 10 reboots i lost mind and remove in safe mode driver....

i have a compaq presario x1000 running 10.4.8 JaS.. I too would love to get the 2100 wireless working.. can test new drivers!

2915 Won't work on newly installed 10.5.2.... Thought this would work. Just gives me error when loading up and just crashes and sits there. Has diag. Message to.

Hi, i need some help, i tried to install the driver for the 3945 but i can't to do it work. i can't see my wireless card anywhere.

i tried to do a manual kextload and i receive a message telling me about failed dependencies.

mlazy, about your file iwi3945r750, i didnt have problemas with it.

"Could not get ID for kernel control. 2" Anyone figured out how to get around this problem when trying to run networkSelector?

"Could not get ID for kernel control. 2" - What to do? Help me!

if the access point is configured as security WPA/PSK. The Network Selector can't be established successfully. Just flat wireless network (unsecure). I am not try with WEP key security. Has anyone succeeded with it (wep)?

My wireless card is 2915abg on Thinkpad T43. I am waiting for the next iwi driver update.

Thanks for excellent work.

;)

"Could not get ID for kernel control. 2" with iwi3945r748 and 10.5.2. Any clue ?

JUst installed driver software( newest 2200 Build), after installation my nsgui not working giving me error that says" application is Incomplete or damaged" please someone help, i m dying to get to to work, is there any where i can get last build, like archive or build history ??? thnx a lot

Hi I have 4965 wireless card after I installed the beta driver it adds an extra "Ethernet" adapter to the laptop but after that what do I do? add the config manually? and in case I have to I have WEP encryption as well, so what can I do in my case then? Does it appears as a wireless device to everybody else here? Thanks

same here 4965AGN.show as Ethernet in the network list..but don't know how to configure.

I have a LG E500 and I'm running Kalyway 10.5.2 only sound and wireless don't work. Check the wifi model directly from LG web site.http://www.lge.com/products/model/detail/e500.jhtml

Please HELP

I have a Sony Vaio VGN-B1XP and have got XxX os x86 10.4.11 rev2 installed, I have installed iwi2200 but having no joy, as the wifi card is not being detected as airport and also the wireless hardware is not showing up on system profiler.

Any help would me greatly appreciated........

Could not get ID for kernel control. 2" with iwi3945r748 and 10.5.2. Any clue

Same Problem - anybody figure this one out?

To all who given messages "Could not get ID for kernel control. 2"

This error means one of the following

1. The iwi2200 driver is not installed
2. The driver is installed but you have not rebooted
3. The kext did not load for some reason (are you in safe mode?)

My steps:

1. Update my 10.5.1 to 10.5.2
2. Install iwi2200
3. Uninstall (open Terminal)

sudo -s
rm -rf /System/Library/Extensions/iwiXXXX.kext (replace XXXX with your specific driver)
rm -rf /Library/Receipts/iwiXXXX.pkg
rm /System/Library/Extensions.*
kextcache -k /System/Library/Extensions

4. Install iwi2200 again
5. Reboot

Now driver is working good!

Guys, I tried to install the 4965. I've a HP dv6563 with intel 4965 inside. Its not working. Not even show a new option on Network. Any clue?

When I try to do the uninstall listed above I get error messages: sudo does not exist -s does not work

how do i uninstall? help please, the drivers wrecked my install and don't want to do it all over again

I am trying with the 4965. Nothing :(

Hello, I tried to install the drivers for my Dell Latitude D410 with the Intel 2200 wlan card. But after reboot I get the blue screen and it hangs on that screen. Can you tell me how to fix it?

Regards, Rob.

Could not get ID for kernel control. 2" with iwi3945 and 10.5.2.

Hey i installed iwi4965 my toshiba A200-19L booted fine no issues...

but in d dmg network selector is not present...wot shud i do

im stuck on scanning..... it doesnt move a bunch. help?

Hello, I have a Dell Inspiron 1520 with Intel 4965, so I installed iwi4965. The system boots normally and I can see my wireless card in Network. Then I do a scan with networkSelector and it reveals my wireless network correctly, but when I try to connect to it, it shows "Trying to associate" and it returns to main menu without connecting. The network is without WEP. Any help?

Hi, I have Dell XPS 1530 install Kalyway 10.5.2 everything went smoothly but the wireless card not working. I have Intel 4965 wireless card follow the instruction everything look good but when I try to scan with Network Selector its see my router but won't connect exact same problem as Giacomofazio described above any idea what is wrong? Please drop in some advise. Thanks,

Just installed 10.5 on Toshiba A100 and got it working fine except for the wireless 3495 . Any help?

Hi, Fresh install Kaliway 10.5.2 on IBM R61 with Intel 4965agn, so I installed iwi4965. Same problem than giacomofazio & xenoxe. I can see Wireless Networks with NetworkSelector but no connection possible. Thanks in advance for your help

Hi, kalyway 10.5.4 on HP dv9500cto with Intel 4965agn has the same association problem as yogiman, giacomofazio and xenoxe. Interesting thing, without the 10.2 or 10.3 update, the wifi hardware doesn't even show up in networks. Hope breakthroughs are coming soon. Thanks for all your hard work.

How can I help you in the development of th 3945 Drivers?

It works fine on my 2915ABG, on my Acer 8104 laptop, with JaS 10.5.4

Pardon my ignorance, but the instructions say to copy the "networkSelector" to a prefer directory; however, when i downloaded teh iwi drivers only 1 DMG file is provided and when mounted into the macOS only the iwi2200.pkg file is in there, if i double click on it, then the installation starts? I'm I supposed to get the NetworkSelector from somewhere else?

I appreciate any help.

Thanks,

Will V.

I cant find the network selector in all the files

that's exactly what i posted right before you but still no reply :(

I downloaded the file from the site but its just the pckg file. No networkselector is provided.

So I found the NetworkSelector. For those who are looking for it in the "zip file" dont bother. The actual NS gets placed under your applications menua after you run and install the package (you'll find both there NetworkSelector & NSGUI) I guess the instructions need to be updated as we no longer need to place the NS file anywhere (again, it gets placed under your applications menu)

Now, I was able to installed the IWI2200 drivers, the installation went fine and the system did not crash after rebooting; however, as listed in the instrucitos, once I rebooted every time i try to access "Network Preferences" the window crashes/closes after 3 seconds of opening it. I am able to load both NS and NSGUI and i am able to see the access points around me (including mine) but when i try to connect thru NS (terminal) and get prompt for the key, i enter it then get BUS ERROR. If i use the NSGUI i enter the key, then get a loading circle and nothing else happens (it never connects)

I tried the steps listed by Glebov.iv but i got the same results.

My steps:

Update my 10.5.1 to 10.5.2 Install iwi2200 Uninstall (open Terminal)

sudo -srm -rf /System/Library/Extensions/iwiXXXX.kext (replace XXXX with your specific driver)rm -rf /Library/Receipts/iwiXXXX.pkgrm /System/Library/Extensions.kextcache -k /System/Library/ExtensionsInstall? iwi2200 again Reboot

Anyone who can provide any other ideas or suggestions i would really appreciate it!

Will V.

For all those people who have 10.5.2 and are getting "Could not get ID for kernel control. 2". upgrade to kalway 10.5.3 combo update. reboot. and voila this application works.

you know what i don't really understand is why you don't just fuckin buy the intel 3945 abg from ncix.com (sorry for swearing) or something.... it's only like $30 bucks and pci-e, i'm sure you don't need a full laptop donation for that

im stuck man when i go to networkselector and hit scan my qwest router shows up n i enter the code but i dont now what to do from the point. should i jus hit enter or do something else HELP PLEASE

Hi guys, I have a very strange problem. My network works perfectly at home. the nsGUI appears and everything. Today I brought my laptop to work and the nsGUI icon does not appear, but I still can see the card on Network preferences. I uninstall, reboob, and reinstall the iwi2100, reboot again. For a second the icon appeared in the bar. I went to the network preferences because it recognize a new device, I hit apply, and automatically the icon dissapear and I could not connect to the network. I went to terminal and use the networkSelector and it try to connect for a second to the unsecure network I choose but after less than a minute it lost connectivity. I did the same procedure for a while, but now it won't connect. I am using OSX 10.4.9 Any suggestions how to fix it?

aitkos 10.5.4 Could not get ID for kernel control. 2 3945 intel card.

No luck here. -(

iDeneb 1.3, tried the 2200 stable for 1.5 -> stuck at scanning, SVN version crash at boot :-(

I have a nexoc Osiris S620 II Notebook with an 4965 agn card... It works fine to find Networks with NetworkSelector, but when i'm trying to associate i get the message "you have to restart your computer"...

I will commit 20 of the 100 Euros needed to get the tools to allow this great coder to complete the driver for the popular 4965 card.

If 4 other people will do the same, we'll all get the driver we so desperately need.

It's well worth it and good Karma to give back to this developer.

Anyone else ready to help?

System crashed by 3945 driver. Had to removed it. Where can i find the driver that works Thank you

is it going on???

Hey, I installed the 3945 without any problems. Before the installation, under Airport, it I dont think it found anything, and you could press Turn On, but nothing happened. Now, It says that the cable for airport is not plugged in. Any ideas?

Hello, got the 3945 detecting access points, also got it compiling with 22 errors. (normal?) Can any developers give me a little direction for debugging and continuing development on the 3945 drivers. It is VERY close to working. I'm running iDeneb v1.3 10.5.5 9.4 Vanila kernel, kernel flags (cpus=1 -f) Toshiba Tecra M7 tablet. Wireless and tablet drivers are the only things not working for me right now. (Audio works through speakers) I'm going to start hanging out in the IRC channel. Just need a little dev insight. Please project owners, allow me to help.

john.e.b.good@gmail.com

quote? Hey, I installed the 3945 without any problems. Before the installation, under Airport, it I dont think it found anything, and you could press Turn On, but nothing happened. Now, It says that the cable for airport is not plugged in. Any ideas? /quote?

Same to me. Installed without any problems, but cannot enable the device ( the wlan led didnt turn on )

i installed the 3945 on a T60 w/ that wireless card... I am dying for this driver and just tried it again out of desperation... I have been waiting over a year now (officially) for this thing, any feedback I can give that will help the development please let me know I really need this thing (i have a ton of lenovo machines)

good luck thx.

exact same symptoms as make4u2d0 btw... let me know if I can be more detailed to help out debugging :)

Installed 3945. Tells me that my ethernet cable is not connected...wireless obviously is not working still...

NetworkSelector doesn't do anything on my toshiba a100.

Tried the default iwi3945 and had no luck getting it to work - NetworkSelector did nothing and the network panel said "cable not connected". Uncommented the IO80211 define and the driver began crashing at start - "super::start failed" and it was calling free() after that and that free() was causing a panic.

no go - refuses to allow unload with a "hanging reference"... still no idea why it reports "super::start failed"

Went back to the default and it still refuses to associate. But I do see some lines in the source that were commented out - they seem to be related to telling the drivers private 802.11 code to associate. Uncommenting them leads to a kext that doesn't load. Will try adding them as 'extern "C" { ... }' later and trying that...

Hi, I installed 4965 AGN driver. It installed great, I reboot.

BUT it seems to not recognize my card because I when I scan in neworkSelector, there is nothing :(

Can someone help ?

Thanks.

3945 not working this suckz

iwi4965 not working. I can get it to scan, but it won't do anything else. I tried with 2 unencrypted networks and 1 encrypted network, and 'associating' with them did nothing in all 3 situations.

I have a Lenovo X60 with 3945. I dont know how its working, but Its working... Maybe has something to do with me using Osx86 on VMware

i haven't been following this awhile. but can any1 tell me if iwi2200 driver is able to support wpa yet? i got it to work with open wireless network, but not with wep or wpa.

Has anyone been able to get this to work? I need he 3945 but it doesnt look like its gonna work :(

i have a dell inspiron 8600 with 2200bg wifi i download the driver reboot then open network selecter... wont work same message over and over againe! "could not get kernel ID" WHAT THE HECK DOES THAT MEAN!! IM IN NEED OF WIFI!! I HAVE TO USE MY DESKTOpS LAN TO GET INTERNET PLEASE HELP!!!

oh and i tried to update to 10.5.3 from 10.5.2 in crashed! please help!

I can't get this to work either; Although I do have the blue light on, but it won't detect any networks.

to anyone with intel 3945 driver or any other that is under development: it looks like that after reboot it crashes! :P thats probably normal because the driver is not ready yet...

if you need to connect via wifi wait for the driver to be developed or buy a cheap USB wifi adapter driver is developed? to do your job...

Thanx for the developers for trying and i'll be also waiting for the drivers to be ready...

I'm on an Aspire 9410 with the 3945 driver.. No crashes, no kernel panic, and NetworkSelector can see networks, though I assume WEP/any other kind of encryption still doesn't have support because I can't actually connect to any of them, and I know they all have encryption. I'll try with an unencrypted network tomorrow when I have access to my own router. Although I'm not expecting it will work.

Dell 700M running Kalyway 10.5.1 - 2200 b/g drivers. Works with WEP only. Have to turn the power on for the Network Selector upon each boot up. Only seem to be able to get it work using DHCP with manual address. Also have to re-detect the ssid, and re-enter the WEP key. All things considered, my hats off to the developers working so hard to bring us these cool drivers.

On a HP Pavilion dv9500. Installed the drivers, but nothing works.

The solution for the "trying to associate" issue is the following

boot: -s

mount -uw /

rm -rf /System/Library/Extensions/iwi

rm /System/Library/Extensions.mkext kextcache -k /System/Library/Extensions

reboot

and after this don't try to install it again so you'll never have this issue again. I checked the code and it is crap, I 'm really surprised that someone got it working. Don't waste your time.

Thanks a lot for your uninteressed job. It's very usefull. I will try tris driver soon. :-)

I have a dell latitude 820 with the 3495. All have tried all the possilities and nothing in the internet make it work properly.

The only way that I found to have internet on my hackintosh was setting up a bluetooth lan between two computer using PAN and configuring the mac to use the computer (windows by the way) with internet access to be my proxy. It works fine indeed :-)

Hi, I have a Dell latitude D630 with a intel 3495 wifi card. Installed iAtkos 5i. Works like a charm, but when I install iwi3945.kext, I can see networks in the networkselector, but cannot connect (no security)...

Please Help!

garbage code make your own

I'm having trouble trying to get my 2915ABG card working. After installing the driver package on iPC 10.5.6, the Network Preferences always crashes and opeing Airport results in a kernel panic. Plus, through the NUGUI, it gets to "obtaining IP address" but not further. Has anyone else have trouble with the 2915 ABG?

Please fix this driver!!!!!!!!!!!!!!!

Please make the driver intel wireless 3945a/b/g. Please ............!

If have problem , please developer team post to this forum for everyone can see and discuss. This driver is take for along time but it not going. Please help.

2200. iDeneb 10.5.6. Installs fine, networks showing... but can't connect to any. Loading Network in System Preferences causing a "The application System Preferences quit unexpectedly.". Any ideas?