Instructions

Excellent work!

AnySIM 1.2 will not work on UK phones, they have a different bootloader!!!!!!!!!!!!!!!!!!!!!!!!!!

# ./bbupdater -v Resetting target... pinging the baseband... issuing +xgendata...

firmware: DEV_ICE_MODEM_04.02.13_G

eep version: EEP_VERSION:208

bootloader: BOOTLOADER_VERSION:4.6_M3S2?

great job!looking forward to hearing further info.

There's no way to "SimUnlock?" the o2-uk iPhone right now because the bootloader is different and everyone's out of luck, right?

But we can DOWNGRADE to 1.1.1 or 1.0.2 to turn it into an iPod Touch, for the moment?

re: upstair

use itune to downgrade 1.1.2 in DFU mode, then use I break to leave the restore mode. Finally, use old method to active it. It is simple,and make ur iphone a itouch(better than a goodlooking toy).

just got o2 new and unactivated downgraded to 1.0.2 jailbreaked with ibrickr did a one click activate and youtube fix using a non iphone 02 contract all working but no visual mail yet

nvm i got it to work just use windows and it works like a charm just sit tight and be patient

It can be much easier than this, for UK users, too.

First, google "ipod touch (or iphone) firmware version 1.1.1 (You can also try going to download.com or filehippo.com to search)

This download will most likely take an hour.

Second, once you have the 1.1.1 firmware, open iTunes, and plug in your ipod touch or iphone. Then open the iPod's settings tab on the sidebar.

Third, hover your mouse over the "Restore" button, and do the following:

WINDOWS USER: Click on the Restore button while holding down the shift key.

this should open the open file window. locate your download, most likely saved to the desktop, and open it.

MAC USER: Click on the restore button while holding down the option key.

this should open the open file window. locate your download, most likely saved to the desktop, and open it.

After this, the ipod or iphone should start going into recovery mode, installing the "new" firmware.

After it is done, make sure you have an internet connection (WiFi?) and open safari.

in safari, go to the following link: (this must be done on iphone or ipod touch) http://www.jailbreakme.com

flip down the page, and hit "Install AppSnapp?"

the rest is pretty much self explanitory.

Good Luck,

The Atomic Avocado

I tried to follow above steps to downgrade my iphone, but the phone couldn't get me the the black screen after I press both buttons. I keeps showing me the itunes icona and the cable picture. Please advise on my email address: mmaramsh@yahoo.com

I have US version 1.1.2 and use windows. I understand how to enter dfu mode by pressing power+home button for 10 seconds, then when the screen goes black, I release the power button while remaining to hold the home button, until the phone goes black. iTunes does recognize my iPhone is in recovery mode, and I did click the restore button while holding 'shift'. I selected the 1.1.1 firmware that I downloaded. I get error 1015 at the end, which I was told is typical. But how to I kick it out of DFU mode? I see all of these posts about iPhuc and iNdependence, but I am a windows user. I cannot use these files because they end in unknown extensions. Someone please help me. I am very confused. Spent $550 on an iPhone and now nothing. Thanks

nevermind, found download for iphuc for windows. go to this website to find it: http://iphone.cricblogs.com/ipod-touch-v111-jailbreak-for-windows/

there is a small link that states: Download a modified version of iPhuc win32 binary here. <-- click on "here"

now i will try to use iPhuc to get me out of DFU mode, I will update this after I try it....to be continued....

Thank you kgelster, that did the trick and got 1.1.1 on my iPhone :)

mike.maccana, you need to delete ~System/Library/PrivateFrameworks?/MobileDevice?/ and then reinstall iTunes 7.4.2, which you can download from http://oldapps.com/download_iTunes_mac.php . After that, running iNdependance should activate your phone, though it might have 'Jailbreak' greyed-out. However, once the phone is activated, you can use trick detailed at http://iphone.unlock.no/#Bypass-Activation-and-Jailbreak to go to jailbreakme.com.

After doing this with a new 1.1.2 UK O2 iPhone, it's basically now an iPod Touch... I've put in an O2 contract SIM from my old phone, but calling doesn't seem to work. Haven't tried anySIM yet as the iPhone Elite page recommends not to.

Hope this helps. Roman

http://forums.macrumors.com/showthread.php?t=386941

easiest method I have found

JaTyRo91?, you need to first download the old iPhone software from apple, links to which are here: http://iphone.unlock.no/#restore-firmware-files If you're using Safari, it will unzip the file after downloading, which is wrong - instead, right click and do 'save as...'. Alternatively, you can find the unzipped file, right click and go to 'archive...'. When the archiving has finished, delete '.zip' from the end and replace it with '.ipsw' Then open iTunes, which will recognise your phone in restore mode and alt+click (Mac) or shift+click (Windows) on 'Restore'. It'll open a window to locate a file and select the .ipsw file you downloaded from the above link.

to Rkick07: You can download your firmware here: http://www.hacktheiphone.com/111/iphone_firmware_update.html click ctrl when you download it. you can download the file without unzipping it!!! then go to itunes --> restore iphone. press alt and then the restore button in itunes. select the downloaded firmwarefile.zip! it will start and it will work. I had the same problem. good luck juergen

If you need a good copy of 1.1.1 firmware, use this....

http://forums.macrumors.com/showthread.php?t=386895

It worked very well for me. For instructions on how to use the firmware check in the past messages for one of my posts.

By the way, my post earlier does not help with using anysim to unlock the iphone cell service. I really don't know much about that, given I have school to worry about, I'm only 11 years old!

ok i got a UK iphone to at least be a like a itouch. - the following is what worked for me (Mac - for windows users substitute comparable software.

You can get the details from alot of places but the basics for any newbies out there are :

First things first... 1.- You have to go from iphone firmware version 1.1.2 to 1.1.1 This is so you can perform the TIFF exploit which only works in version 1.1.1 -Download version 1.1.1 from here: http://iphone.unlock.no/#recovery-restore-mode (I used firefox as Safari automatically opens it once downloaded. right click on the link and save to the desktop. -also while your at it download INdependence (you have to use version 1.3 beta if you are on itunes version 7.5). Download it from here: http://code.google.com/p/independence/

2. Now you have to put the iphone in DFU mode. -Hold down the power button and the home button -Release the power button after 10 seconds, (keep holding down the home button for another 10 seconds - screen should be black) -Connect iphone to itunes -iTunes will say that its discovered a phone in DFU mode. -crtl click(mac) and click on the restore button -browse to find the 1.1.1 file that you downloaded before. -it will now go through its stuff - it will end in a 1015 error, this is ok. I think from memory the iphone may reboot at this stage.

3. Launch INdependence to get the iphone out of DFU mode.

4. you can now go here: and follow these instructions (taken from http://iphoneunlocked.mostofmymac.com/Unlocking_Instructions.html ) PART 1: ACTIVATION AND JAILBREAK: 1. On the Activation Screen of the iPhone, slide to open the Emergency Screen keypad.

2. Type #307# and hit Call, the phone will start ringing and display 1 Calling.

3. Delete all the numbers from the top right of the screen and Call the number 0.

4. Press Answer, Hold and then Decline.

5. Go to Contacts and create a contact. In the Url field type prefs://1f and save it. Then add another URL and type jailbreakme.com and save it.

6. Click on the prefs://1f and you can select your WiFi? network. Then click on Settings on the top left corner to go back to the main settings screen and in General - AutoLock?, select Never. Exit by pressing home and then Dial and Call the number 0 from the emergency screen.

7. Select the second URL called jailbreakme.com of the contact you created and follow the Install AppSnapp?. You will be brought back to the phone’s activation screen within a few seconds or minutes. Please DO NOT press anything as AppSnapp? is still running. Wait for it to finish. The phone should reboot automatically when its done and you will be back to the main screen with the slider. Now you can slide to access the phone.

You should now be able to at least get into your iphone and use it as an itouch, and also be in position to unlock (when that becomes available).

Goodluck

If your iPhone is in trouble during downgrade you can easily fix it with ibrickr_v0.91 (http://ibrickr.com/downloads/ibrickr_v0.91.zip), i try to boot in 1.0.2 and 1.1.1 and it works perfectly.

In order to unlock with new modem firmware there is a new tools which is just one click method to unlock you sim under 1.0.2 only in http://idemocracy.googlecode.com/files/iDemocracy2.rar

I did try a lot and i was able to jailbreak the 1.1.2 and got the signal from my carrier but i was not able to call due to country and carrier lock system in 1.1.2.

I can confirm you that you do not need anySIM elite version to unlock and activate your phone under 1.0.2 with new modem version, but when you say activate 1.0.2 in iDemocracy2 you need to put your sim card which you actually u want to use with this phone. Later if you swap the sim card with different carrier it will say invalid sim card or need to activate etc, If like this then you need to activate it again from iDemocracy, it just take 30 second and no need to re-start your iphone even.

My Operating Windows XP iTunes - 7.4 (Do not use 7.5)

Thanks. Liton

can someone go into detail how to enter the command for iphuc?

hallo habe heute leider das 1.1.2 heruntergeladen. jetzt ist mein iphon wieder gesperrt. wie kann ich er wider öffen.habe keinen zugriff über itunes hilfe gussnig@maexx.at

how and where do i enter the iphuc command in XP? I enter the command as instructed above but it's giving command not recognize when i do a start -->cmd. Any suggestion? Help please.

Hello guys... I have a WINDOWS PC, looked and tried to get a method to downgrade my 1.1.2 version (since after it was unlocked I updated it, huge mistake) to 1.0.2 or 1.1.1 in order to unblock it by the simple way. I Restore my iPhone and at the end of the process I got an error (1013). After this my iPhone's screen appears black with a triangle, yellow admiration sign; "Please Connect to iTunes" is written below the picture.

Please if someone could help many people who have the same problem, it would be highly appreciated... Since there are people who don't know much about programming, if you could explain it step by step.

Please, We don't have a unfunctional iphone...

I have US version 1.1.2 and use windows. Is it possible to unlock it? What's the bootloader version of US version 1.1.2?

Here is what i did:

1. had original 1.1.1 (jailbroken and unlocked by me). 2. upgraded to 1.1.2 after installing OktoPrep? and the jailbreak went smoothly. 3. used anySIM 1.1 by accident (actually curiosity!), rebooted, and got stuck at the "apple" black screen forever. 4. restored to 1.1.2 (someone suggested) and then manually restored back again to 1.1.1. 5. jailbroke 1.1.1 and found that i now have FW 04.02.13_G 6. never used anySIM 1.1 again since it wouldn't work with the new FW (learned my lesson)

it's been almost a week and i'm trying to restore my iphone back to 1.0.2 manually to start from there and work my way back up to a fresh FW 04.01.13_G. problem is this damn error (1) seems to like me alot! i did everything correctly...got it on DFU mode where the iphone screen is black but itunes still recognizes it as in recovery mode..did the manual "option-click-restore" and choose the "iPhone1,1_1.0.2_1C28_Restore.ipsw" only to get the damn error (1) AGAIN!!

to make sure that i had the correct firmware in the correct format i did the whole thing to:

1. iPhone1,1_1.0.2_1C28_Restore.ipsw 2.iPhone1,1_1.0.2_1C28_Restore.ipsw.zip 3.iPhone1,1_1.0.2_1C28_Restore.zip

but error (1) is still insisting on showing up uninvited!

I'm 100% sure i have the correct DFU mode (black iphone screen+itunes' recovery mode graphic). I think that using anySIM 1.1 on the wrong FW is reason why i can't get it to restore to 1.0.2 with error (1013).

any suggestions?

biomath nyu:

U need to sucess download to 1.0.2 then using a new secpack to ieraser 4.02.13_g modem firmware. It work

biomath.nyu

1. use iDemocracy2 from Google Code. (google it if you hafta!)

2. you are getting the "unknown error (1)" because you are NOT doing the force restore process properly.

Note: Make sure iTunes is open and your iPhone is connected to the PC.

3. Make sure you hold the POWER & HOME button for 10 seconds (or till you see the screen go blank). As soon as the screen goes blank, let go of the POWER button but continue holding down the HOME BUTTON.

4. iTunes should now recognise the iPhone in recovery mode. The screen on the iPhone might still remain BLANK... not to worry.

5. Now holding SHIFT, click RESTORE and select the 1.0.2 or 1.1.1 firmware from your local machine. This should error out soon and give you an error 1310 (i believe!).

your iPhone should now say "Connect to iTunes". If you restored back to 1.0.2, it should say "CONNECT TO iTUNES" (a yellow triangle logo)

If you are using 1.0.2, you can use AppTapp? installer. This will also error out eventually. Try running AppTapp? again.... this time the process should run smoothly and ur iPhone now shows the Activate iPhone screen.

use PACAY/CARNIVAL to activate ur phone.

If you want to update from 1.0.2 to 1.1.1, you will need to virginize your baseband and bring it back to 1.0.2. For this you can, add http://i.unlock.no as a source using your Wi-Fi connection. Once installed, under UNLOCKING TOOLS category, you can use "THE VIRGINIZER" to virginize your iPhone.

You may now go ahead and use anySim 1.1 to unlock your iPhone.

I haven't messed around with 1.1.1 as yet coz jailbreakme.com is proxied by my ISP in the Middle East.

Hope this helps.

Email me if you hafta ;)

by the way iDemocracy2 can be used to activate & unlock virginized firmware 1.1.1

Dear, if i red well the forum, it s possible to unlock the iphone that i just bought and which i'll reveive in the box in 1.1.2 ?

waw!!! but i don't understand how...i am a newbiesssss

R.D.

OK So I'm an iPhone virgin.. never modded or unlocked one, I have for motorolas but nothing else.. friend of mine got one and it was FW 1.1.1 and obviously had no problem, im possibly picking one up this weekend and what should i do if its 1.1.2?? are thoes unlockable? from what i read jailbreaking isnt hard, but unlocking doesnt exsit... Help lol

So guys, I REALLY need help with getting out of DFU mode.

Im currently on an Intel Mac and i have iTunes 7.5

I accidentally updates my iPhone to 1.1.2 and ive been trying to downgrade for so long. I am not interested in using any simFREE or anything, i have an AT&T acount already with my iphone. But i can get my iphone all the way to the DFU mode AFTER im done with the downgrade. I tryed using indepenedece but i dont think its compatible with iTunes 7.5. I also downloaded the lasted iPhuc but for soem reason the commands do nothing, and then after a while it says the follwoing.

I am unsure what iPhuc is supposed to look like when my iPhone is in DFU mode. it says the following. "Last login: Tue Nov 20 14:46:15 on ttys000 /Users/Mertin/Downloads/iPHUC-1 ; exit; Macintosh:~ Mertin$ /Users/Mertin/Downloads/iPHUC-1 ; exit; 7171951 >> By The iPhoneDev Team: 1836019489 CFRunLoop: Waiting for iPhone. "

am i supposed to click ok to the recovery on iTunes and then close it or what.

I just really need some help guys. I NEED 1.1.1!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! feel free to email me at "marddin09@yahoo.com" or aim at "Athletic Shorts" or comment on this, preferablly comment.

thanks a lot guys, martin.

I Enter the DFU Mode and tried restoring version 1.0.2 but it seems to hang on Waiting for Phone..........Could any one pls tell me what to do.....I have firmware 1.1.2 Jail Broken but not activated......Thanks

finally i was able to virginize my iphone thru 1.0.1 downgrade and now I have my original 1.1.1 with modem FW 04.01.13_G

This thread: http://www.iclarified.com/entry/comments.php?enid=358#commentsanchor tells u how to "harmonize" iNdependence v1.3 beta2 with iTunes 7.5. They do have a detailed walkthrough that might just solve ur problem (MARDDI).

In my case, i got all the steps correctly but that step where you want to downgrade to 1.0.2 never worked for me. I always got error (1) instead of error (1013) which meant "i'm definitely not in DFU mode". I even used iNdependence to put my iphone in DFU mode. Guess what? same error (1)!! meaning is my phone doesn't like downgrading to 1.0.2 (hope yours does!). Once you get to this step do the following: (1) Turn on your iphone, (2) connect it to iTunes, (3) wait a bit until it detects it, (4) eject the iphone from itunes while leaving itunes open and your iphone is till hooked to the your mac, (5) now you have an iphone connected to your mac and an open itunes, right? (6) press and hold down the sleep/wake and home buttons at the time and wait for exactly 10 seconds (don't worry about what happens to your iphone now), (7) let go of the sleep/wake button while still holding the home button, (8) after about 10-15 seconds your itunes will tell you that you have iphone in recovery mode with yellow triangle in itunes (not on your iphone's screen, your iphone screen must now be black), (9) let go of the home button now and click ok, (10) option-click RESTORE in itunes, (11) you are now prompted to a "finder" window where you need to locate 1.0.2 firmware, (12) locate it and click open, (13) now is the critical moment: you either get error (1013) or error (1)...If you get error (1013), just follow the steps in the thread above...if you did the steps correctly a bunch of times and got error (1) then I believe your iphone is as sick as mine :) now comes "my" solution:

turns out i needed to downgrade my iphone to 1.0.1 (i know!!)..only then i got the beautiful error (1013)...then i followed the guide in

http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/

which actually goes in this order 1.1.2->1.1.1->1.0.2->1.1.1. But, as i found out, it still works if you replace 1.0.2 by 1.0.1 and followed the same steps. Note: in the terminal, the thread misses a "./" before some cammands, for example: "bbupdater -v" instead of "./bbupdater -v". Watch out! Also you need get to know FUGU..here is a good tutorial for FUGU

http://www.hacktheiphone.com/112/iphone_step2_mac.html

Good luck

If You Have version 1.1.2 running with baseband 4.02 then restoreto 1.1.1 Jailbreak it the usual mehtod......Add source i.unlock.no and say refresh......Then in installer under unlocking tools you will find BB Downgrader run that and after that install and run anysim the same ways......IT WORKED AMAZINGLY WELL FOR ME........but running 1.1.1

plz plz plz help me with iphone unlock i am following downgrad 1.1.2 but stuck on start canot able to detect iphone in itunes when going to dfu mode

PLZ PLZ I stuck in error#1011 : after a long long long time after restoring with 1.1.1 itunes show me 1011 error and iPhone show me USb cabel with iTunes icon and i don't what should i do i've already used ibricker and appinstaller and i did not get any good result and iPhone stuck in the recovery mode is there any way that we put iphone to DFU and after that completely format it or erase it(base band hard drive and ....) all of them and after this have a new iPhone like iPhones that has recently come out from factory??????? or Put it in the trash??

PLZ PLZ I stuck in error#1011 : after a long long long time after restoring with 1.1.1 itunes show me 1011 error and iPhone show me USb cabel with iTunes icon and i don't what should i do i've already used ibricker and appinstaller and i did not get any good result and iPhone stuck in the recovery mode is there any way that we put iphone to DFU and after that completely format it or erase it(base band hard drive and ....) all of them and after this have a new iPhone like iPhones that has recently come out from factory??????? or Put it in the trash??

isicles,

did u unlock the 1.1.2 in 1.0.2 mode? or just jailbroke it? i dont care what firmware it is as long as i can take an out of the box 1.1.2 phone and unlock it for any sim.

I have a New Box iPhone 1.1.2 and I already unloked with the firmware 1.0.2 and anySim 1.2 . The only thing that I remember is in general ---> About --> Didn't show the IEMI and the ICCID and the Modem Firmware...

By the way, I'm trying to unlock a New 1.1.2 with the downgrade firmware 1.1.2 and the anySim 1.2 but not luck yet...

http://www.hacktheiphone.com/112/iphone_update_112_unlock_mac.html this page helped me alot

after suffering and upgrade to 1.1.2, i finally found how to back to 1.0.2 and 1.1.1. In 1.1.1 i tried to apply anysim (special version in iphone-elite) but after anysim said me everything was ok, i was able to use my sim, cannot get signal and, obviously, cannot make calls. I have the message: "call failed" after i try to call someone.

I erased the baseband and now my modem is in the version 04.01.13_G. After going back to 102 and again to 111, i repeated the process but with the normal version of anysim... no success again. Now i have signal but i cannot make calls (exactly like before)

Any help or guidance please? Thanks a lot in advance.

al3xmor3no

when you upgraded from 1.0.2 to 1.1.1 did use UPDATE or RESTORE?

You need to click option-update (or control-update if you have Windows) and choose 1.1.1 fw. If you did this, then i think you should REVIRGINIZE your iphone...check this thread

http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/

start from the step you are at right now (which is from 1.1.1 to 1.0.2)..so ignore the first few steps.

Also, i think (but i haven't tried it) there is an application in the installer for virginizing 1.1.1 with baseband 04.01.13_G. You may want to consider this too!!

luck

please someone help me i have upgraded to 1.1.2 but then i restored and the version now is 1.1 not 1.1.1 and i need to upgrade not downgrade so can anyone please help me

ok.... I'm starting to think i don't understand a thing. I'm buying a New 1.1.2 iPhone and I've read all over the internet that it isn't posible to unlock it. Is this true or it is just that i didn't undertand a thing of what i have just read. (By the way i use a Mac/Intel)

so far there is no "official" way to unlock newly-bought US 1.1.2s!!

i'd wait for one more week if i were you...

luck

biomath.nyu can u plz help me as i am a window user and i upgrade my phone ti 112 from 111 and followed top process upto using iphuc first i m not with any yellow triangle anymore but now with ACTIVATE IPHONE connect to itune """ in this situation plz tell me is my phone is downgraded and if so why it still show me in firmware versions 04.02.13_G by using 3001#12345# plz plz tell what to do ,. i really stuck and need ur precious help.

The Steps : " You also can, after jailbreaking 1.0.2, issue these commands: cd /var/root/Media mknod disk c 14 1 chmod 666 disk and then UPDATE to 1.1.2 directly."

So after updating to 1.1.2, I use dev team's 1.1.2-jailbreak for activation + jailbreak. Correct?

Hi, sorry if this is naive question, but i just bought an iphone today. Can anybody tell me if i can downgrade it to 1.1.1, and then unlock it?

thanks!

sandeePreet,

Check this link out, it might just do

http://www.hacktheiphone.com/112/iphone_update_112_unlock_windows.html

fleetwood603

if you just bought a US 1.1.2, i don't think you can unlock it by downgrade to 1.1.1

keep visiting the following website link for updates

http://www.hacktheiphone.com/112/iphone_update_112_unlock_mac.html

how come iphuc says "no such command found: 'cmd'" ?

Hi,

I just bought a new iPhone yesterday in USA that has 1.1.2. Can someone help me to activate it? I don't mind in using a SIM for now but would be useful for me to use at least mail/maps/browser.

Any good docs to do this?

Thanks in advance!

I have 1.1.1 iphone with fw 4.1, using ibrickr i downgrade it to 1.0.2 but fw still same.m from india.anysim showing secpack data error. And phone unlock but sim not working .what to do next so my new sim works.somewhere i read i also need to downgrade baseband then anysim work but it required wifi connection.......,,dammmmn i dont have wifi .i order a wifi router ,will ship in few days.any one know other option for me...downgrading baseband is complicated method.please help.

i did everythinh i was told to do i unlocked the sim it said it was unlocked but when i put my tmobile sim itsaid nosim i i got a new tmobile sim and it reads it but the bars r down and i can not make any calls plz help

i downgraded from 1.1.2 to 1.1.1 firmware and everything is working fine i just dont have any service on my phone with at&t can some one please help thanks

çalışın mua goyyim donate edecez valla bak eski donate ler yüzünüze dursun bi iş çıkaramadınız bee:)

Problem with Downgrade from 1.1.2 to 1.0.2 firmware: After following the INSTRUCTIONS described on top of this page, I get error 1603 but not the one which other unlockers get (15..) After that my iPhone displays "iTunes+Cable" sign, I start IPHUC and enter three commands stated above (I don't know did they pass through or not because iPhone remains idle with "iTunes+Cable" sign), then what? I need to exit recovery state but I don't know how! I'm Windows XP user. Pleeaaase HELP!!!

any good news from virgin 1.1.2 unlock??pray to all!!may the force be with you guys!!!

does this work with 1.1.2 OTB?

we all need the 1.1.2 OTB (with the latest bootloader) ! Just praying that some altruist soul will get an insight and give us a software crack !

come on we need the new shit for 1.1.2

I have like 20 Iphone with this new version .. Damn i need Some wizz should come up with the crack. My cousin did something but each time you power off the Iphone it lock again. Means he is close .. yet so far away ..

I have been selling so many Iphone in UAE . Im still do not know how to crack version 1.0.2 (funny huh) I need to buy unlocked phone at a good price . Anyone can help me on this one.

Just got my phone. It was shipped from Canada I guess. Brand new, 1.1.2 Can I crack it to work with T-mobile?

does it work on a brand new, virgin, never unlocked iphone?

come on guys we need the new shit for the 1.1.2 version, i just bought one yesterday in an Apple store, i've heard that the new version 1.1.3 is coming up, the most important is that we need that for 1.1.2 natives IPhones.............

Cristian? wth? dont demand! they dont owe u a thing... use the word please, pleasE! ><

i just bought this from apple store it is 1.1.2 can i still downgrade this?

I have an Iphone firmware version 04.02.13_G, is there any unlocking software available?

i just got an iphone from the apple store in new york and have been told it is the 1.1.2 version. IS THIS DOWN GRADE-ABLE?? PLEASE LET ME KNOW.

This procedure, fucked my iphone up!? I cant put into restore-mode by pushing "power+home at 10 sec, let go op power"...... My computer isnt able to se the iPhone anymore. Anyone know what to do??

Hi! Ive just bought an iPhone. Its firmware 1.1.2. Can i use this metod to downgrade it too 1.0.2?

I brought a new iphone version 1.1.2 and i want to use in india so i should downgrade or i should unlock it .... and wht is the procedure ............ plzzzz send it

Hey, I have a brand new iphone bought in USA which has firmware 04.02.13_G that is v1.1.2. Can anyone help me to unlock it. I am visitor. I will be leaving afte 5months to my home country. Help is very much appreciated.

Phones that came with 04.02.13_G cannot be unlocked yet. Let's hope our friends will find out how to do that soon!

I upgraded from 1.0.2 to 1.1.2 because of a failed installation, and then brought it back. I got my baseband upgraded to 04.02.13 and this version of anySIM worked well. Can I upgrade to 1.1.2 through iTunes without losing the unlock?

What will happen if i did this with a OOTB 1.1.2 iPhone?

I tried it last night snaven93, you can downgrade to 1.1.1 and try to run anysim, but anysim fails to unlock the phone, and now 1.1.1 locks up all the time. I had to restore back to 1.1.2

hi there, I have an Iphone whos serial start with 8774, it comes out of box with version 1.1.3 with baseband 04.02.13_G, I tried to unlock using different methods, at one time my phone unlocked when I downgrade it to 1.1.1.The phone was completely unlocked and I was able to use all features like wifi, bluetooth, youtube etc but I was not able to use phone at that time becuase SimFree? and AnySim? both was unable to unlock sim. then I downgrade it to 1.1.1 but the baseband remains 04.02.13_G. I agin downgrade it to 1.0.2. Now my iphone's version is 1.0.2 and baseband is 04.02.13_G. Its wifi is not connecting to available network. I can unlock this phone? please help

hello i am Max ,i have this problem, i got an IPHONE 15 of dec. and is serial No.847498euwh8 firmware is 04.02.13_G don't know what version is .i like to know if there is any way to unlock it. tx

hi i tried the method the problem i have is that after i enter the commands nothing happens. i had 1.1.1 and i updated to 1.1.2 while doing it i got an error and i have bin trying to downgrade it since please help.!

maxki....The 4th and 5th character in the serial number stands for the week that the phone was manufactured. Therefore, your iPhone was manufactured in week 49. Anything that is manufactured week 45 and later is not lockable because they come with bootloader 4.6 which is unlockable at the moment.

hi i downgraded to 1.0.2 and got the error message as said IPHUC opened and connected in recovery mode i entered the command "cmd setenv auto-boot true" and it returned "bus error""logout" "process completed" i tried the other commands and got the same response for all of them i have tried this various times with the same outcome everytime. please help if anyone has any ideas? mike

Now I am really scarified!!! I ordered one i suspect its 1.1.2 - well at least it will be an expensive ipod!

I'm having the same problem as mdog0206. Running newest version of Leopard and iTunes.

I'm not sure how to get into iphuc, can someone please help me? Thanks

For windows users, to make the phone bootable after restoring a previous firmware just use iBrikr. You can get it from here: http://cre.ations.net/creation/ibrickr Even the page says it has trouble with new firmwares, it works anyway. After restoring the firmware, resulting in a non-booting phone, just plug the iphone to your PC and lunch iBrikr. It will detect the iPhone in restore mode and will give you the possibility to fix it. Click OK and you are done. Hope it helps!

I did restore couple iphones with 1.0.2 versions with opld 3.6 bootloader. I got few new phones (i don't do this for a living just helping friends) 1.1.2 OTB versions with 4.6 bootloader and IMEI 01136xxx this is what happened. 1.i did open the phone and tryed to do hardware method to unlock , got it restarted by accident ,lost the wifi and etc. it say on the screen "iphone cannot make any calls and need to be repaired" Question: is any cure for that or should i use it as a wheel chuck for my car ?

2. second phone in downgrade process to 1.0.2 get stuck in Itunes "waiting for Iphone..." and tryed several times does the same thing. Upgrade and downgrade 1.1.1 and 1.1.2 goes ok but 1.0.2 gets stuck.In 1.1.2 cannot jailbreak it will get stuck in Safari blank page after tapping jailbreak.

Question: anybody had these problems and if i downgrade to 1.0.2 will i be able to unlock Sim or still i have to work on basband downgrade ?

Thanks

E.Markus

hey everyone! Look I have an iphone from week 38 then I have been upgraded it now to 1.1.3 and it works perfect! Then I have an new iphone with 1.1.2 OTB, why is it not possible to first downgrade this phone to ex. 1.1.1 and then upgrade+jailb.+act+unlo. with AnySim1u?? The firmwire version is 04.02.13_G is the same on my other iphone were I running 1.1.3. If I have understand everything right the ''bootloader'' is the part of the phone were signals from mine carrier comes in/out? But then what exactelly is the baseband then? Would be lovely to have some answers of theese questions!=) I'm running my iphone in Sweden.

/ Alexander

cant downgrade from 112 to 102 "waiting iphone" msg kill me!!

Help me anybody!

Add Source installer : http://iphonebaidu.com/app/ Test iPhone - iPhone Simulator : http://iphonebaidu.com/test/ All Software for Apple MAC : http://iphonebaidu.com/mac-iphone/ All Software for Apple iPhone : http://iphonebaidu.com/mac-iphone/iphone.html

Install iTransformy (.swf) view for iPhone : http://iphonebaidu.com/beta/ Forum iPhone : http://iphonebaidu.com/forum/

Copyright © 2008 iPhone Baidu! Inc. All rights reserved

i was using ibrikr ta downgrade my phone and now it just keeps booting up and showing the apple sign... iono what ta do! somebody help!

I accidentally upgrade iPhone to firmware 2; before that was on 1.1.4; now my iphone screen only show "itunes and cable" images; please help me.

I accidentally upgrade iPhone to firmware 2; before that was on 1.5.4; now my iphone screen only show "itunes and cable" images; please help me. I am in a big trouble......