No problems on an MacBook? Pro except I'm still getting a YouTube? error, same as when I ran ZiPhone?. I have a previously iPhoneSimFree-unlocked phone and I'm wondering if somehow it became locked again since it no longer shows a carrier when I switch from AT&T to a Ukraine UMC card. Not totally related to iNdependence 1.4, but I didn't want to be a guinea pig and unlock it again with the stern warning I was given... ;-)

When I try to install, installer it says main script execution error

everything went smoothly on jailbreak and activation for 1.1.3 on my macbook, except when ever i try to make a call, it always fails. anyone else get this?

oh, i should also mention I'm using my old cingular chip, not the original att one that came with it. I never had to unlock the phone before to use the cingular chip, do i have to now?

you have to unlock the phone...... damn!

Have been running IPSF unlocked, independence jailbroken and activated on 1.1.2 (week 25 iphone) with vodafone UK sim in UK. Ran update with itunes and then independence 1.4 beta . Now activated and jailbroken, but not seeing network. Possibly this is the same issue that jrbtempe and tamtamg are experiencing. Do we need to install a Lockdownd or something? Cheers..

And despite the warning about IPSF unlocked phones, thought I would give the SIM unlock a try. It worked. Sees the Vodafone UK network and makes & receives calls fine. Thank you. PS: You can have my donation tomorrow, meanwhile I'm off to bed!!

iNdependence fails to recognize as jailbroken my 1.1.3 jailbroken iPhone (wich I Jailbreked activated and unlock using Ziphone) any one having this problem???. Also when I restore my iPhone back and activate it using itunes (im an AT&T costumer) then went to iNdependence an tried to jailbreak and unlock both ff them succeded BUT seconds later got an error saying iphone needs repair... which made me shit my pants...

PS: Intel iMac White Core2 Duo Leopard 10.5.2

@carlz0736: ZiPhone?'s jailbreak doesn't set up the afc2 service (I noticed this when I looked through his ramdisk). Which means, it isn't truly jailbroken since you can only write files to the Media partition with the regular afc service.

@tamtamg: Yes, you will need to SIM unlock again. The 1.1.3 upgrade flashes the baseband, meaning it'll wipe out any previous SIM unlocks. Also, TurboSIM doesn't work with 1.1.3. Apple closed up a lot of the old loopholes with the 1.1.3 update.

So, Any one with IPSF should reunlock through sim unlock? jrbtempe, tamtamg and fruiteatingbear, can you update me please? I am running 1.1.2 iphone with IPSF, can I update? How to handle this?

opera...@dialectro.com, can you guide us (People who unlocked their phones with IPSF, running 1.1.2) through the upgrade? Independence work fine, but I would like to know, is it safe to use it with IPSF?

PS: Independence works fine for me (OSX 10.5.2, intel).

for all those with IPSF unlocked phones, you can restore and update your phone regularly via itunes, then jailbreak and activate via independence. once that is done, just install signal.app (no need for installer, it comes as a standalone app), what this does is enables your IPSF unlock so that it is functional. so no need to re-unlock your phone. the catch with this is, you need to run this app every time you power off and power on your phone, as it leaves no permanent changes on your phone. this isn't too bad because i honestly dont remember the last time i rebooted my phone, and it feels good to know signal.app doesnt do any permanent changes to your phone. reminder! this is for IPSF'd < 1.1.3 and 3.9 BL.

here's the link: http://www.trick77.com/downloads/

@nounousomes so you had an IPSF < 1.1.3 unlocked phone, did you have network after the upgrade/jailbreak/activation without any extra effort? it seems 1.1.2 is the last known resistant upgrade for IPSF.

Brand fresh new 1.1.3 phone. Used 1.4 beta2.

Activation and jailbreak worked fine. Wifi works at this stage.

Unlock seemed to work (from the verbose boot logs) but in fact it didn't and it killed my Wifi (it's greyed) and Bluetooth. General->About shows no IMEI, Wifi address or BT address.

If I restore the phone to 1.1.3 and activate again, I'll have Wifi again.

What could be wrong ?

How are yall installing installer? I am getting main script execution error Regards, Madhur

Regarding the bug where it 'hangs', should it hang after it finishes creating the RAM disk? Mine seems to be hanging before it's finished. If not, about how long should that step take?

Jailbreaks great. Installs SSH. Had to activate a few times before it finally took off. Strange, but I'm finally on 1.1.3, unlocked, activated and happy as a clam. Nice work.

Till now I did not upgrade to 1.1.3. Currently, I am on 1.1.2 unlocked by IPSF. Is this version of independence is sufficient to upgrade, jailbreak my phone? Do I need to reunlock my phone with it?

@TamTamg?, you tried the sim unlocking? did it work?

Okay, I need major help. My iPhone is now stuck looping "BSD root: md0, major 2, minor 0" over and over. If anyone can help, I would greatly appreciate it.

@lutherjw

Put your iPhone in DFU mode, and restore, for now i suggest not trying anything until a stable version

Same here. Started with a fresh restore of 1.1.3 and now "BSD root: md0, major 2, minor 0" over and over upon trying to jailbreak. Restarting iPhone just brings me back to the same error message. OS 10.5.2, Intel.

Everything works fine except for the Google Maps current location feature. Does anyone know how to fix it?

I feel extremely dumb .... the iPhone won't go into DFU mode. Once again, I desperately need help. :D

Is it confirmed then that iPhoneSimFree unlocked phones do not survive the 1.1.3 upgrade and must use the whole patched signal.app thing every time the phone turns off and on? Gutted if thats true....

My iPhone had the following error appear: BSD root: md0, major 2, minor 0

Repeated over and over again. What I had to do was turn off the phone (press and hold power & home). The I had to to enter DFU mode (press and hold power & home until Apple appears, this can take a while. Then release power and keep holding home. If you release home, turn it off and do it over). Open up iTunes, and click "Check" when the dialog box appears, then "Restore" then "Restore and Upgrade".

I'm now updating the phone with ZiPhone? 2. I'll let you know what happens.

I hope that some one could help us in the IphoneSimFree? patched phones, does the new version of independence (jailbreaking and unlocking) will work so as to avoid the signal.app problem?

Maybe a dumb question but...

Currently have 1.1.2 firmware, jailbroken, unocked, ssh enabled, 7.6 itunes, 04.02.13_G baseband, iPhone upgraded and manipulated only by itunes and iNdependence/anySim. Want to upgrade to 1.1.3 but I don't see the option for a Pre Firmware Upgarde in iNdependnce 1.4b. Can the firmware be upgraded to 1.1.3 via itunes and then re-simunlocked via Independence 1.4b?

BTW - tried a return to jail with 1.4b which failed with "Error entering recovery mode."

To unlock, get ZiPhone? 2.0. Go to ZiPhone? folder in terminal (Mac OS X instructions):

./ziphone -v -a wait until this completes ./ziphone -v -j Wait until this completes ./ziphone -v -u Wait until this completes.

The iPhone is now unlocked and jailbroken.

Cheers,

I believe (what I did) was just go to iTunes and hit "Upgrade". It will update your iPhone. Now run iNdependence. If you get the error: "BSD root: md0, major 2, minor 0", then follow my previous instructions.

Cheers,

"BSD root: md0, major 2, minor 0" over and over upon trying to jailbreak

I know I saw that. Could be the same reason that it gets stuck in that loop. iNdependence doesn't recognize that a ZiPhone2? jailbroken phone is actually jailbroken.

No matter though, it still works. Installer is installed on your iPhone, so you can use the installer app to get the BSD Subsystem and SSH if you want it. I just found this out now.

Looks like there is still a few bugs in iNdependence. I'm wondering what we did different, as I have a friend who did it and it ran fine without a hitch (just the need to restart the app).

Cheers,

@ lutherjw simultaneously press power and home until the screen turns of after 3 second let go of the power button until iTunes says it detect and iPhone in recovery mode all of this must be whit the iPhone connected to the computer.

Thanks carlz0736. I had tried that a few times without it working, but it finally did. I proceeded to activate with ZiPhone? and it worked fine ... very strange.

THE SIM UNLOCK METHOD ON THE GUI IS ONLY FOR O.T.B. 1.1.2 AND UP!!!

MY SUGGESTION IS TO MAKE YOUR PROGRAM CHECK FOR THE BL VERSION, THEN DECIDE WHICH UNLOCKING METHOD IS GOOD.

I USED GEOHOT'S IPSF LIKE METHOD AND IT'S GREAT!! http://mytrini-iphone.blogspot.com/2008/02/how-to-unlock-113-with-39bl.html

IT DOESN'T NEED SSH I BELIEVE

lutherjw: I had that happen to me once (the stuck in ramdisk mode). But only when I was first creating the ramdisk. The way I got out was to do the manual DFU mode (press and hold both power + home for 10 seconds, then release power and continue holding home for 10 seconds). After that, just use iTunes to restore.

Anyways, I haven't had this happen to me with the latest ramdisk in iNdependence -- and I've jailbroken/SIM unlocked about 50 times with it.

Does anyone know if this version (ziphone/iNdependence) breaks Nikita?

Hey, does anybody have the link to d/l the 1.1.2 firmware? thanks.

I tried using the Activate button and I kept getting the same error other people are getting. (BSD Root:....)

Then, I thought I'd try using the Jailbreak button instead, thinking it might work instead. Well, I didn't get the same error, instead I got this:

Singleuser boot -- fsck not done Root device is mounted read-only

If you want to make modifications to files:

/sbin/fsck -fy /sbin/mount -uw /

If you wish to boot the system:

exit

Feb 14 04:02:14 launchd10?: can't exec /bin/sh for single user: No such file or directory.

Ya, that's the error. Any help there? lol

oops, found it:

http://mytrini-iphone.blogspot.com/2008/02/where-to-find-all-iphone-firmware.html

@ therobster11: I get that same problem, my phone was unloked with IPSF, have you taken that route as well?

The only unlocks I've done are the ones on previous Independence versions. I've had this phone since 1.0.1.

Okay, so it's not IPSF causing that problem, and I've had my phone since 1.0.2. Does it matter if I have my T-Mobile SIM in the phone at the time? I don't think so, but I just want to cover all bases

After many many searches, I have come across some posts suggesting that IPSF unlocks should survive the upgrade, however this may be the "soft upgrade" Can anyone confirm that IPSF users are indeed screwed when updating via itunes proper? Anyone?

For the record, I've been unable to downgrade to 1.1.2 (iTunes errors: The iPhone "iPhone Cannot be restored because of an unknown error (1)".

any one know how long the sim unlock should take? its been about 10 minutes and independence is still at the "Waiting for SIM unlock" stage. Any suggestions?

@ dirtyblueshirt, after you downgrade to 1.1.2 and get the error message, try quiting itunes and relaunch independence. It should take care of it.

@tamtamg: the error occurs after iTunes extracts the firmware, but before it installs it on the iPhone, iNdependence doesn't help any there. :(

Regarding IPSF, fruiteatingbear has an unlocked IPSF, he upgraded using itunes, jailbreaking with independence, everything went fine with him except there was no Signal, so he used the sim unlocking in independence 1.4 beta and it worked. I hope any else with IPSF unlocked phone could confirm this.

@tamtamg

Please let me know if sim unlocking allows you to use your old Cingular sim. I think I am in the same boat as you.

With older versions of the iPhone (up to 1.1.2), I was able to simply "activate" with independence and my old Cingular sim would just work.

Good luck and thanks for reading.

@dirtyblueshirt: Youre doing the DFU Mode Wrong simultaneously press power and home until the screen turns of after 3 second let go of the power button until iTunes says it detect and iPhone in recovery mode all of this must be whit the iPhone connected to the computer.

@tamtamg close iNdependence try again this tends to happen, if not restore the iphone using the methods above and try everything all over again.

Remember people this is intended to be used on any iPhone 1.1.2 and 1.1.3 OTB but they must be on firmware 1.1.3 when unlocking whit iNdependence and it would be better if the phone is completely clean as in recently restored thats how it work for me.

Same for me BSD root: md0, major 2, minor 0 iphone 1.0.0 OTB -> jailbreak ->1.1.1 jailbreak -> 1.1.3 trying to jailbreak :)

I hope any one will help with the IPSF unlocked 3.9 BL phones?

AWK1015: I actually emailed Geohot about gunlock (what I use for SIM unlock) and he said that it works for both BL3.9 and 4.6. I actually tested it on both bootloaders myself and it works fine.

@Jake.Miner this app(iNdependence) is not intended for 1.0.0 OTB you should try other methods try here http://iphone.unlock.no/

PS: @Jake.Mine when i said this app i reffered to 1.4.2

ok everybody, here's a recap of my experience of the beta. First off, I did a restore and update option on my iphone to 1.1.3. then I quit out of itunes and killed the itunes helper. Launced 1.4 beta, did jailbreak first, screen goes black and a bunch of code strats scolling down the screen. Phone reboots and phone is jailbroken. From there I went through the activation process, everything goes fine except can't make phone calls because I'm using a cingular sim. Next I figure I give the sim unlock a shot to see if it helps. First attempt at unlock, nothing happens and independence hangs on waiting for sim unlock screen. I force quit out of independence and try it once more. Viola, screen goes black and code starts running. After sim unlock everything works, and I'm a happy man. Next on the list is to figure out how to get installer.app back on it again (any suggestions?). Good luck everyone!

Tamtamg, you were using IPSF before this?

tamtamg: Yes, you have found the zen of working with iNdependence. :) There is the occasional hang, but if you learn to recognize quickly when it's happening, it's pretty easy to work around it. Glad everything worked out for you. I wish I could fix the hang, but I need documentation from the Apple developers about why it happens and how to work around it.

nope, never had to unlock for cingular until now. but fruiteatingbear said earlier

"And despite the warning about IPSF unlocked phones, thought I would give the SIM unlock a try. It worked. Sees the Vodafone UK network and makes & receives calls fine....."

so you can take him at his word, give it a try and report back to everyone.

@tamtamg

Thanks so much for the recap. I did the sim unlock and everything is working great.

Jake.Miner, carlz0736: iNdependence works fine for me with my 1.0.0 OTB phone. I'm not sure why a couple of people are getting this ramdisk hanging problem... I haven't been able to reproduce it yet and I've booted from the ramdisk about 50 times on 3 different phones (two 1.0.0 OTB, and one 1.1.2 OTB).

@opera..., dude its seriously a minor flaw which is not you fault, I wouldn't worry about it. But anyways, great work man, expect a donation from me soon. But if I may offer a suggestion, how about auto installing installer.app during the jailbreaking process. I think a lot of users would greatly appreciate that.

opera...@dialectro.com: funny i only got a ramdisk hang once on my OTB 1.1.2 but and i just got a call from my fiend and he said thats must be a problem generated by OS X itself and not the app, we are still looking at the logs at the console and process to see where exactly it freezes that is if we manege to recreate the the hang, I will report back on my findings as soon as a i can

tamtamg: Yeah, I could make it an option. The big problem I have is that then I have to keep updating the version of Installer.app I use each time they update it. Otherwise people will get mad because I'm installing an outdated version.

I really wish they'd make Installer available as a standalone app so that people can install it however they like. Rather than having to jailbreak via a website to get it (or some other nonsense).

carlz0736: Yes, the hang is from the OS. However, I created the RAM disk which the OS is running off of, so the problem is somewhere in the RAM disk. If only I could reproduce it...

opera...@dialectro.com: well I think I found a way I ejected the previously mounted ramdisk using the disk utility and when I ran iNdependence again i repeated the hang, I think it has to do whit the way os x handles the mounting and un-mounting of the image try that I see if it you can reproduced it.

any one else having issues with the ssh that comes with the beta? It installs alright but i can't connect to the iphone. any one else having this issue?

So just to make sure I have the process straight: I have a jailbroken 1.1.2, never used or activated as a mobile phone, 1.0.2 OTB. To get a jailbroken 1.1.3, I upgrade in iTunes to 1.1.3, then launch iNdependence, activate/jailbreak, and I'm good to go?

To echo an earlier but unanswered question, how would I get Installer back on my newly jailbroken 1.1.3?

Hey Op! Again, great work on putting together a complete package that's easy to use! My only concern is that I can't seem to get the current release of installer.app on the phone. I was able to dig up an older version and put in on my iphone over SSH. However, I can't "update" to the most recent version within installer itself, as I had hoped. I get a script execution error message. Any ideas as to why this might be happening? Or, does someone have the most current installer.app we could try?

PS: IPSF using Independence Sim Unlock to get signal, didnt need to run Signal app -

tried to upgrade from otb 1.1.1 independence-jailbreaked-upgraded to 1.1.2 phone, to 1.1.3. it keeps returning a "error no 6".

and now help cause i'm stuck. the only firmware that itunes allows me to restore (meaning i don't get an error) is 1.1.2. which i cant activate! i'm entering dfu, downgrading to 1.0.2 and then when i'm trying to activate 1.0.2 i get a "error writing services.plist"!

why won't iNdependence get my iPhone 1.1.2 OOTB, jail broken, then upgraded/restored several times to 1.1.3 using MBP ver 1 OSX 10.4.11 iTunes 7.6 out of recovery mode? Everytime the iPHone is in recovery mode, iNdependence will quit. RAM disk will create (up to 17.9 MB), then iNdependence gets killed when the iPhone goes to recovery. Also, I tried iJailbreak first and noticed this error when it put the iPhone into recovery. iJailbreak doesn't work for me either - I get an error with every version of theirs I've tried. I've always been able to use iNdependence to bring it back from iBrick status, just not with an updated baseband/firmware 1.1.3.

Activation consistently fails.

• Loaded firmware 1.1.3 in iTunes
• Quit iTunes and killed iTunes helper
• Opened iNdependence. Clicked Activate button
• As already known, iNdependence crashes after making the image.
• Opened iNdependence. Clicked Activate button
• 'Waiting for jailbreak' appears.
• iPhone reboots to restore mode, ie, cable and iTunes logo are displayed.
• And sits there. Since help says 'Please be patient as it will take a while', I wait but am not sure how long things should take. Author: could the app please tell me how long this should take, as this would make troubleshooting much easier?
• Anyway it sits at restore mode for half an hour, with no feedback from iNdependence or the iPhone. I gather this is too long.
• If I quit iNdependence, rebooting the phone now reboots it back into restore mode.

Just upgraded to 1.1.3, used independence to activate/jailbreak/unlock my iphone successfully, but google maps 'locate me' not working...is this a known issue?

"Some people are reporting that when they do a jail break or SIM unlock, the phone boots to text mode, but then hangs and displays the same message over and over again (BSD root: md0, major 2, minor 0). This is currently being investigated (I'm unable to reproduce it). To get out of this mode, you need to manually put your phone in DFU mode (using the Power + Home buttons), then use iTunes to restore your firmware."

I'm getting this continually.

Worked great on my phone. I bought it at the first of Dec with 1.1.2 firmware. Jailbroke it then with the downgrade, exploit, upgrade method. Had to restore and go to 1.1.3 a couple of weeks ago to get support. This jailbreak worked great and got me back my custom SMS ringtone. I can't overstate how much that means to me. You rule, man. I haven't tried to install any apps yet.

I would like a rational install option for installer.app. But we, the users, need to be asking them to do updated standalone releases to make it possible for you to do that. The fact that the only supported way to get it is via an exploit that's been patched for months is a crime.

Thanks very much for this.

Just applied SIM unlock on top of IPSF on a 1.1.3, upgraded from 1.1.2, works fine. Thanks

For people having the RAM disk lockup problem, I've given some instructions for creating the RAM disk by hand. If you feel comfortable with the command-line, can you try it out and let me know where the script is failing. Thanks.

@jordansoles The 1.1.3 upgrade is patching the 4.02.13_G baseband and flashes it to the phone. So google maps wont work without some help (solutions to this discussed on Hackint0sh)

Great work! Thank you. Jailbreak and Sim unlock hung for a long time. Force-quitting and restarting independence solved the issue. Locate me and itoner don't work, and of course still no way to get the most recent Installer.app

hey great app! having problems with wifi and bluetooth?? it says that there unavailible. Activateed 1.1.3 and sim unlocked using iNdependance!! please help

Hi Operator - here's my console output from ramdisk generation (I deleted the existing ramdisk file as asked):

***********************************
* iNdependence RAMdisk Generator  *
* Created by The Operator         *
***********************************

Extracting firmware...

Removing the first 0x800 bytes...
36582+1 records in
36583+0 records out
18730496 bytes transferred in 0.780171 secs (24008196 bytes/sec)

Decrypting ramdisk...
bad decrypt
271:error:06065064:digital envelope routines:EVP_DecryptFinal:bad decrypt:evp_enc.c:509:
36582+1 records in
36583+0 records out
18730496 bytes transferred in 0.601586 secs (31135200 bytes/sec)
rm: /Users/mikemaccana/Library/iTunes/iPhone Software Updates/firmware_112/Firmware/all_flash: Permission denied
rm: /Users/mikemaccana/Library/iTunes/iPhone Software Updates/firmware_112/Firmware/dfu: Permission denied
rm: /Users/mikemaccana/Library/iTunes/iPhone Software Updates/firmware_112/Firmware: Directory not empty
rm: /Users/mikemaccana/Library/iTunes/iPhone Software Updates/firmware_112: Directory not empty

Mounting ramdisk...
/dev/disk1          	                               	/Volumes/ramdisk

Modifying ramdisk...

Unmounting ramdisk...
"disk1" unmounted successfully.

Creating new ramdisk...
InvalidResponse
2008-02-15 01:49:26.063 iNdependence[256] endSheet:returnCode: requires a non-nil sheet
Feb 15 01:49:26 Mike-MacCanas-Computer-2 /Applications/iNdependence.app/Contents/MacOS/iNdependence: Could not receive size of secure message
2008-02-15 01:50:26.858 iNdependence[315] *** -[NSCFType objectForKey:]: selector not recognized [self = 0x3c6510]
2008-02-15 01:50:26.859 iNdependence[315] *** -[NSCFType objectForKey:]: selector not recognized [self = 0x3c6510]

same error here. Permission denied on that directory. Thanks for your work!

How I got installer.app working:

1. Get the latest version from here: http://repository.apptapp.com/packages/System/Installer.zip

2. Install it using independence (naturally.)

3. SSH into your phone and issue the following commands:

chmod 777 /Applications
chmod 777 /Applications/Installer.app
chmod 777 /Applications/Installer.app/Installer

It's entirely possible that one or more of these lines may be left out, I didn't try between, but read somewhere that the "Main Script Execution Failed" problem was related to permissions, and those commands seem to have fixed it for me.

YMMV :-)

Apologies if this seems like a stupid comment.... I have used Independence twice to upgrade (last one to 1.1.2) successfully and used AnySim? (via Independence) to use my own SIM card. I'd like to get to 1.1.3 and it appears that this is now possible with the latest beta of Independence. My questions is, does the AnySim? app which Indy has "bundled" (for wont of a better word) inside it allow this? Right now I'm Jailbroken, Activated and am happily using my own SIM on 1.1.2 and as much as I would like the extras available in 1.1.3, I don't want to end up bricking the damn thing and having to go back and re-do everything if I can avoid it.

Additionally, what's the process for getting Installer.app on the iPhone now? I guess the more sensible question would actually be - Has anyone got Installer working on a jailbroken and unlocked 1.1.3 iPhone and if so, what version did you use, since it doesn't show that it is available for this firmware yet?

Cheers

Macnerd

@Macnerd:

See my post above yours... I've got installer installed and working on my 1.1.3, although it appears that some of the packages in installer need to be updated with proper permissions... I'm finding that some things I install don't work properly, presumably because some of the file permissions aren't right, but most things do (summerboard, terminal, books, etc.)

As far as updating your phone, the latest independence is pretty versatile... You won't require AnySim?, independence now has unlock software built-in. You can unlock through the independence interface without adding unlocking programs to your iphone.

Installation, as op says, is as easy as updating your phone to 1.1.3 in iTunes, quitting iTunes, starting independence, and activating/sim unlocking from there. The longest part of the process for me was downloading the 1.1.3 update.

Mind you, there have been a few people with reported problems, so, something isn't 100%, but it appears to be working for most people.

john.angus method (above) for getting installer.app onto 1.1.3 works flawlessly. cheers!

mike.maccana. rven...@yahoo.ca: That error is normal (and is not what's causing the problem). It's simply cleaning up some files at that point (so it doesn't matter if it fails). From that log, it would appear that the RAM disk creation script worked just fine. So you shouldn't get the "BSD root: md0, major 2, minor 0" error when you jailbreak or SIM unlock.

A note on using installer with 1.1.3, I've been reading all over the place that there are problems with numerous packages (I've run into a few myself already.)

They're most related to where the package gets installed... Since the iphone now runs applications as user mobile, and not root, if the package or any save data it generates are written to some place that the mobile user can't access, it won't work. So, expect most of your previous programs to not work until their respective developers update the packages for 1.1.3 (or you could SSH into your phone and muck around with permissions on your own, but I can't guess at what problems you might get into.)

Hi operator, thanks! Works fine now. My symptoms were indeed not the "BSD root: md0, major 2, minor 0" error, but rather that (after successful jailbreak) and attempted SIM unlock, it would hang with "Waiting for SIM Unlock", without anything happening on the phone (just "slide to unlock").

I've then installed SSH, and confirmed that the phone was connected to wireless, but could not ssh in, because remote host identification had changed, so I deleted the other RSA key in .ssh/hosts.

After restarting iNdependence then, SIM Unlock succeeded. Thanks again, good luck with that remaining bug.

hi there, i have just tried to upgrade my 1.1.2 anySIM unlocked phone to 1.1.3. everything proceeded well. however, i found that i can use google map locate before using SIM unlock in iNdependence, but it fails after unlocking. i found that, the baseband of my iPhone is downgraded to 04.02.13G instead of the expected 04.03.13G. is there something i made wrong?

also i have get the installer.app put in my home screen. it can be executed. however, my iPhone haven't installed BSD Subsystem. When i tried to install it, "Main script error" occurred after trying to install. i can't find any help about this case on the web. can you give me a hand as well on this issue?

Thankyou very much, iNdependence really makes the process of unlocking, activation, jailbreak easy. looking forward for your reply. Thanks again!

Waiting for 04.03.13G, Google location was the only stuff i was waiting for(

First, I upgraded to 1.1.3 with iTunes and used iNdependence to Activate/Jailbreak/Unlock but Google Maps 'locate me' didn't work...

Then I restored 1.1.3 with iTunes, used iNdependence to Activate/Jailbreak and ZiPhone? 2.0 to Unlock. The result is a fully working - 'locate me' works! - clean - ZiPhone? didn't install Installer.app - iPhone with 1.1.3, 3.9 BL and 4.03.13_G baseband.

I'm having some SSH issues. Everytime I try to connect to my phone via independence, I get this error:

Fail Couldn't connect to SSH server. Ensure IP address is correct, phone is connected to a network, and SSH is installed correctly.

When i try the using fugu, I get a connection refused error.

I know i'm using the right ip address of my phone. I've tried uninstalling and reinstalling SSH to no avail. Any suggestions? Is there some weird firewall issue with my router or something? Any advice would be much appreciated!

Could be a network issue. make sure your mac and your iphone are on the same wifi network. disconnect your mac's ethernet cable to make sure. that's what did it for me.

I am having same error as computermad, Installer, installs, runs but will not Install BSDSubsystem or Summerboard. I have been waiting on this since yesterday. Please help. Regards, Madhur

iNdependence continously fails unlocking/jailbreaking differint iPhones I have tried.

Mac OS x 10.4.11 (powerPC)

There is no firmware_112 folder in the iPhone Software Updates folder.

Here is my console output:

ditto: /Users/enandenvejny/Library/iTunes/iPhone Software Updates/firmware_112//022-3725-1.dmg: Invalid argument ditto: Couldn't read pkzip signature.

Removing the first 0x800 bytes... dd: /Users/enandenvejny/Library/iTunes/iPhone Software Updates/firmware_112/022-3726-1.dmg: No such file or directory

Decrypting ramdisk... /Users/enandenvejny/Library/iTunes/iPhone Software Updates/ramdisk.dmg: No such file or directory 1783:error:02001002:system library:fopen:No such file or directory:bss_file.c:278:fopen('/Users/enandenvejny/Library/iTunes/iPhone Software Updates/ramdisk.dmg','r') 1783:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:280: rm: /Users/enandenvejny/Library/iTunes/iPhone Software Updates/ramdisk.dmg: No such file or directory dd: /Users/enandenvejny/Library/iTunes/iPhone Software Updates/ramdisk_decrypted.dmg: No such file or directory rm: /Users/enandenvejny/Library/iTunes/iPhone Software Updates/ramdisk_decrypted.dmg: No such file or directory

Mounting ramdisk...

Please do something about the installer issue!!!! It will not install Apps!!!

i followed the steps to get installer.app installed but i still get the "main script execution error" when i try to install the bsd subsystem. please help.

operator: main issue I'm concerned with isn't the permissions part, but the decrypt error shown:

Decrypting ramdisk...
bad decrypt
271:error:06065064:digital envelope routines:EVP_DecryptFinal:bad decrypt:evp_enc.c:509:
36582+1 records in
36583+0 records out
18730496 bytes transferred in 0.601586 secs (31135200 bytes/sec)

I got the "locate me" feature to work on my phone.

I did the jailbreak, activate, and sim unlock with independence. I now have 1.1.3 / 04.02.13_G

I put installer on the phone and tried to download LocateMe?. It gave me an error after trying to download it and it was not showing up on the phone.

I connected to the phone with Cyberduck and found locateme-0.5.zip in /private/var/mobile/Library/Installer/Temp/. I copied it to the desktop, unzipped the app and uploaded it to the applications folder. I then set the permissions to 777, quit cyberduck, rebooted the phone and ran LocateMe?.

I ran LocateMe? just once and now the locate me function works every time in the Maps app on its own.

If you reboot the phone, you will need to run LocateMe? once again before it will work in Maps.

I hope this helps anyone out there.

Operator: I should also add that per my earlier post, my prob isn't the text mode rebooting, but that when Jailbreaking, the iPhone goes into recovery mode (with the connect to iTunes logo) and stays there forever.

So far I've just been waiting for a half hour or so, then using iTunes to restore. But if I launch iNdependence while iPhone is in recovery mode, it crashes:

2008-02-15 08:25:14.247 iNdependence[450] *** -[NSCFType objectForKey:]: selector not recognized [self = 0x38c340]
2008-02-15 08:25:14.247 iNdependence[450] An uncaught exception was raised
2008-02-15 08:25:14.247 iNdependence[450] *** -[NSCFType objectForKey:]: selector not recognized [self = 0x38c340]
2008-02-15 08:25:14.247 iNdependence[450] *** Uncaught exception: <NSInvalidArgumentException> *** -[NSCFType objectForKey:]: selector not recognized [self = 0x38c340]
Feb 15 08:25:14 Mike-MacCanas-Computer-2 crashdump[451]: iNdependence crashed
Feb 15 08:25:15 Mike-MacCanas-Computer-2 crashdump[451]: crash report written to: /Users/mikemaccana/Library/Logs/CrashReporter/iNdependence.crash.log

PS, my ramit112.dat is 30.6MB. Does that sound about right?

Apologies to everyone for the mistake in my Installer.app instructions. You need to perform step 3 for it to work properly because it's running as user "mobile".

@mike.maccana: That error in the decryption step is also normal. It's because of some extra header junk in the file. However, the decryption still works properly.

@mike.maccana: ramit112.dat should be exactly 32,108,032 bytes. Use the "More info..." button in Finder to get the exact size.

can please more people with IPSF-unlocked phones report if they got the Sim Unlock right, and there is no need to use Signal.app? even after reboots?

@iphoneguidedk: ok, that is a genuine error in the RAM disk creation script. It seems like ditto is failing to decompress the 1.1.2 firmware file.

Can you use Finder to go into /Users/enandenvejny/Library/iTunes/iPhone Software Updates/, make a copy of iPhone1,1_1.1.2_3B48b_Restore.ipsw, rename it to iPhone1,1_1.1.2_3B48b_Restore.zip, then right-click that file and select "Open With" -> "Archive Utility" (or possibly "BOMArchiveHelper"). Then see what happens. If there is an error, then you likely have a corrupt copy of the the 1.1.2 firmware file and will need to download it again.

@operator

No errors.<p>

It creates a folder called "iPhone1,1_1.1.2_3B48b_Restore" .

@operator

One more ting: All the files that where missing according to my first post are in this folder, but the folder is not called "firmware_112" but "iPhone1,1_1.1.2_3B48b_Restore"

Yup IPSF here. Upgraded to 1.1.3 in itunes. Actually used another GUI product to jailbreak and activate and then AnySim? 1.3. Works fine

Question though. Real Jailbreak. Ziphone isn't. Can I now use Independence just to jailbreak my otherwise perfectly working iphone?

When i try to unlock now the following comes up on the iPhone (as reported earlier):

singleuser boot -- fsck not done Root device is mounted read only

if you want to make modifications to files:

/sbin/fsck -fy /sbin/mount -uw /

If you wish to boot the system:

exit

Feb 14 22_40:57 launchd12?: can't exec /bin/sh for single user: Nosuch file or directory

please help im ready to cry!! need to install installer app to fix wifi and phone crash basicly signal crash! i have follwed all the steps as far as this:

SSH into your phone and issue the following commands: chmod 777 /Applications chmod 777 /Applications/Installer.app chmod 777 /Applications/Installer.app/Installer

how do you go about ssh into your phone??? please help

@ jsincla: so AnySim? 1.3 is actually installed when you push the SIM Unlock Phone, into the phone and "takes over" what IPSF did before?

i was actually hoping that IPSF would be a part of the unlock itself...

Mr. Operator/iNdependence; can you confirm or explain? :-)

fitzgerald.edward: You need a wifi connection to SSH into your phone: Look up the IP address under your WiFi? settings (click the blue right arrow next to the WiFi? network you choose). Then from the Mac's terminal (Applications>Utilities), enter ssh root@YOUR IP ADDRESS and use dottie (or alpine) as your password.

The error that is repeated on the iPhone screen is: BSD root: md0, major 2, minor 0

It shows up right after these lines: I/O Version 0x0002 Harware Version 0x0011 Mac Address 00:1c:b3:xx:xx:xx

Just before this has happened, here's what happened on my creation of the Ramdisk:

=-=-=- $ ./generate112ramdisk.sh ramit112_files.zip zero_file.zip ramit112.dat

iNdependence RAMdisk Generator Created by The Operator ~/Library/iTunes/iPhone Software Updates ~/Desktop/iPhone/iNdependence.app/Contents/Resources

Downloading 1.1.2 iPhone firmware to /Users/dmullen/Library/iTunes/iPhone Software Updates/iPhone1,1_1.1.2_3B48b_Restore.ipsw ######################################################################## 100.0% ~/Desktop/iPhone/iNdependence.app/Contents/Resources

Extracting firmware...

Removing the first 0x800 bytes... 36582+1 records in 36583+0 records out 18730496 bytes transferred in 0.454143 secs (41243626 bytes/sec)

Decrypting ramdisk... bad decrypt 738:error:06065064:digital envelope routines:EVP_DecryptFinal?:bad decrypt:evp_enc.c:509: 36582+1 records in 36583+0 records out 18730496 bytes transferred in 0.451319 secs (41501680 bytes/sec) rm: /Users/dmullen/Library/iTunes/iPhone Software Updates/firmware_112/Firmware/all_flash: Permission denied rm: /Users/dmullen/Library/iTunes/iPhone Software Updates/firmware_112/Firmware/dfu: Permission denied rm: /Users/dmullen/Library/iTunes/iPhone Software Updates/firmware_112/Firmware: Directory not empty rm: /Users/dmullen/Library/iTunes/iPhone Software Updates/firmware_112: Directory not empty

Mounting ramdisk... /dev/disk2 /Volumes/ramdisk 1

Modifying ramdisk...

Unmounting ramdisk... hdiutil: unmount: "/Volumes/ramdisk" failed to unmount due to error 16. hdiutil: unmount failed - Resource busy

Creating new ramdisk...

$ =-=-=-

I hope this helps! -Ghan

After a fresh restore, and a reboot - Here's what jailbreaking my 1.1.3 phone shows on the screen:

=-=-=- Singleuser boot -- fsck not done Root device is mounted read-only If you want to make modifications to files: /sbin/fsck -fy /sbin/mount -uw / If you wish to boot the system:

exit

Feb 14 23:59:04 launchd9?: can't exect /bin/sh for single user: No such file or directory =-=-=-=-

-Ghan

Sorry about the line breaks -- not sure why it's not taking the carriage returns... -Ghan

Interesting point -- it's still attempting this... It's up to launchd 19... so it's refreshing/clearing this screen and reprinting it.

Whenever I start the jailbreak, after about 10 seconds it says:

FAILURE Error turning on auto-boot

Does anyone know what could be my problem. My Iphone is OOTB 1.1.2 upgraded to 1.1.3 using itunes. It's never been jailbroken or unlocked.

Currently my iphone is on firmware 1.1.3(4A93) with modem firmware 04.03.13_G and from what I could research it has bootloader 4.6.

I'm trying this on an ibook g4 with a 1.2 GHZ PPC with 384 DDR SDRAM running on mac osx version 10.4.11

Any input would be greatly appreciated. Thanks!

frowf...@yahoo.com: "I'm trying this on an ibook g4 with a 1.2 GHZ PPC with 384 DDR SDRAM running on mac osx version 10.4.11" that may be your problem, youre running it on a G4, try a newer remeber this apps is desing using tools from leopard and on intel machines

i have tried iJailbreak as well, it works like charm. 1.1.3 + 04.03.13_G now. is there something can be used for reference from it?

P.S. Installer is working properly as well after i used iJailbreak.

I'm having the same issue as mike.maccana, if my iPhone is in recovery mode, iNdependence will crash! This happens with iNdependence 1.3 as well.

history for my iPhone: I use AT&T as my carrier so I've never tried a SIM unlock.

I used iNdependence 1.3 to jailbreak/activate my OTB 1.1.2 iPhone back in December.

I applied the "soft update" to 1.1.3 and since the Google goodness didn't work (also resetting the phone would put it into recovery mode which i couuld use iNdependence to recover the iPhone), I went back to J/B 1.1.2, never updating my modem baseband to the one included with 1.1.3.

Yesterday, excited to get true 1.1.3 J/B, I used iTunes to update my iPhone to 1.1.3, downloaded iJailbreak 0.5.3 and that didn't work since it's Leopard only, but at some point it put my phone in DFU mode.

So then i tried iNdependence 1.3 to recover, but iNdependence crashed. Ok, so I try iNdependence 1.4 but If my iPhone is in recovery mode and connected to the computer, iNdependence will not start at all. if iNdependence is running and i hook the recovery mode iPhone to the computer - crash. Does the iPhone not have to enter DFU mode to be J/B in this newest release?

FWIW, my RAM disk only takes a few seconds to create and it's always shown as 17.9 MB in disk utility. Also, can i get my phone working again on 1.1.2 since I've now updated to the newest baseband?

i'm using a Macbook Pro ver 1 on 10.4.11 with all updates to the system and iTunes (7.6).

Thanks for any help you can give me on this.

Operator: OK, my ramit112.dat is the same size as yours.

Any ideas about the app putting the phone into recovery mode, and then not doing anything? Any way I can help? Happy to donate if I can get my phone unlocked again.

Sorry, I'm one of the old 1.0.2 (phone) guys (anySim 1.0; virginize; anySim 1.2.1u) and I'd like to go to 1.1.3 (I NEED the lyrics). How should we move from 1.0.2 to 1.1.3? Virginize again?

THANKS

-Michael

Well, I got the "BSD root: md0, major 2, minor 0" error twice and then ran iJailBreak (ijailbreak.com) - phone worked in 5 minutes!

It worked great for me. 1.1.2 IPSF ( original 1.0.1 upgraded and activated using iNdependence at each update) This is my story of upgrading to 1.1.3

• Deleted all my thirdparty apps.
• Did the 'Upgrade' from itunes 7.6 10.5.2 mac book pro
• Shutdown itunes, force stop itunes helper.
• Start iNdependence, click activate.
• it did the ram disk, then showed the waiting for jail break. force quit iNdependence.
• Start iNdependence, click activate
• Jailbreak goes through smooth, then activation.
• Click on unlock. nothing happens.
• force quite iNdependence.
• Start iNdependence, click unlock.
• unlock does its thing, and works. I get signal from Rogers.
• I get a SMS, I call voice mail, it all works. I play with the jiggly icons :)
• exit iNdependence.
• Start itunes, everything good.
• Start iNdependence, install ssh, change password, install install.app ssh in and do the chmods.
• install iSolitaire and iPhysics, both seem to work.

Another iPhone update/activate/unlock done super easy because of the great program iNdependence. Thanks.

@opera...@dialectro.com... great job, hopefully we'll get an iNdependence update for a true jailbreak ;) Kudos! on the great job.

Better way to fix Installer: chmod u+s /Applications/Installer.app/Installer

iNdependence does not activate/jailbreak iphones running 1.1.2 BL3.9 without being upgraded from 1.0.2 with pre-firmware upgrade... please could you fix this thanks

What method is used for UNLOCKING?

FIX for BSD root: md0, major 2, minor 0

I found that my 1.1.2 image was corrupt, but the ramdisk creation script had no way of knowing. I deleted the directory /users/youruser/Library/iTunes/iPhone Software Update/iphone,1_1..1.2_3848b_Restore.ipsw. Next time independence is run it will download the 1.1.2 image and should create the ramdisk correctly. Note that it can take awhile to download, be patient or use command line listed at the top of this forum to watch the progress.

Not sure if this was required also:

I also went into /Volumes and unmounted any ramdisk volumes, and those the couldn't unmount I deleted.

Hope this helps...

I would like to share my experience,

My iphone was unlocked before with IPSF.

Upgraded through itunes with no problems (Upgrade option).

Activated the iphone with independence 1.4 Beta 2.

Then everything is fine but no signal.

Unlocked with ZiPhone? 2.0 (Not Ziphone 2.1) No everything is working and fine (Youtube, Locate me, signal, SMS,...)

Installed Installer with independence.

Tweaked permissions with Terminal as follows:

ssh root@YOUR IP OF IPHONE

put you password (Should be dottie).

cd /Applications chmod +s Installer.app/Installer chown -R root:wheel Installer.app

chmod 4755 /Applications/Installer.app/Installer

Then installer is working fine now.

Thank you all

(PS: All of this is using Mac OSX 10.5.2, iMac, Intel and Operator Method for tweaking Installer did not work for me).

Thank you all

and thank you operator so much for your help and this nice tool

can someone please help. i am now on an unlocked jailbroken 1.1.3 but i cant get signal on anything bluetooth,wifi,phone etc. someone mentioned signal.app or something but how do i go about this? this signal loss only happens after unlock through iNdependance???? please someone?? ps living in ireland??

Simplicity is bliss... Restored 1.1.1 to 1.1.3, Jailbroke and activated with Independence, not a single issue. Now what is the simple method for adding Appinstaller. Please keep in mind I need instructions for an idiot. Thanks to all for the incredible job on Independence.

My Experience..

OTB 1.0.2 >> Unlocked with AnySIM >> Fixed with revirignized and upgraded to 1.1.2 and unlocked again

---

Updated to 1.1.3 in iTunes - updated ok, and relocked phone, but strangely it was still activated and I could use it, but it had been sim locked.

Independence thought it still needed activating, so activated with it. Failed first time worked second.

Tried SIM unlock with independence and failed first time worked second time.

Happy days - Thanks to all involved!!

So the unlock in independence downgrades the baseband to 4.02, right? Does ziphone -u do that, too or will it keep 4.03?

Need Help jailbreaking!!!! I keeps going into the singleruser boot mood and then once i reset it hangs on BSD root: md0, major 2, minor 0. Please some one tell me how to get pass this!!!!

Here's my email barretp@gmail.com

Thanks

Barret

To fix installer i.e. main script error chmod +s /Applications/Installer.app/Installer restart installer

I have a friends iPhone, BL 3.9 Phone, been updated to 1.1.3 via iTunes, locked. When using independance to try and Activate, it generates the RAM disk, then reboots, text scrolls up screen, then you get the single user boot mode, message;

=-=-=- Singleuser boot -- fsck not done Root device is mounted read-only If you want to make modifications to files: /sbin/fsck -fy /sbin/mount -uw / If you wish to boot the system:

exit

Feb 14 23:59:04 launchd9?: can't exect /bin/sh for single user: No such file or directory =-=-=-=-

So put phone into dfu mode, and use iTunes to restore to 1.1.3, and then try again, same result.

Try to delete 1.1.2 restore file from /user...../iphone and then dfu back to 1.1.3, then run again, same result.

Any ideas?

David

still yahoo email and youtube not working. Anyone knows how to fix this?

Everything worked out fine... but iNdependence hangs on Jailbreak and Unlock.

Previous iPhone 8GB, 1.1.2, jailbroken, unlocked and ssh installed with iNdependence running iTunes 7.6

- Deleted all my thirdparty apps. - Chose 'Upgrade' from itunes 7.6 using iMac4,1 - Shutdown itunes, force stop itunes helper. - Start iNdependence, click activate, hangs post RAM disk, force quit iNdependence, restart retry and jailbreak completes. - Run unlock and iNdepence hangs again. Force quit, restart, retry unlock and it completes fine. - Phone restarts get T-mobile signal, wifi, make calls, sms, email accounts work including Yahoo, youtube work, everything except Google locate me. - SSH enable and install apps, iNdependence wants to fix host names problem, it does all good. - SFTP, SCP all work

Next step to try to get T-mobile Edge working.

THANKS for iNdependence

Updated to 1.13 fine. Locate Me in maps dowsn't appear to work, but the biggest hassle is Summerboard. Despite having 1.1.3 Firmware on my iPhone, when I try and install Summerboard from Installer it STILl tells me I need 1.1.3, which obviously I have. Anyone having this issue and has found a workaround at all? Reason I updated from 1.1.2 to 1.1.3 was just to get Summerboard back so I it's all gone a bit pear shaped.

Here's the fix for the YouTube?/Yahoo mail errors that some folks (like me) are getting, courtesy of a kind soul on Zibri's blog comments:

The first thing you have to do after jailbreaking is installing BSD Subsystem and Open SSH in installer.

After that, download this file: http://soundsgood.cocolog-nifty.com/blog/files/youtube.zip

Then, you have to use a program like WinSCP (Windows) or Independence (Mac) to access iPhone file system.

Put them in the /var/root/Library/Lockdown/ folder with WinSCP or Independence.

If you don't know how to do this, I suggest going to HacktheiPhone?.com for tutorials. Also, you should see an activation record folder under lockdown. Delete any file in there.

Exit the program. Reboot your iPhone and you should have a working You Tube program now.

Hope that helps, but note that I used Cyberduck to actually transfer the files in question. ;-)

I'm also getting the following error:

Failed

Couldn't connect to SSH server. Ensure IP address is correct, phone is connected to a network, and SSH is installed correctly.

I also tried uninstalling and reinstalling SSH, but I still get this error

I must be a total incompetent (this is my first Mac and I've only had it a month, so I'm VERY green) because I have tried EVERYTHING that I've read on here to just simply get iNdepedence to work, but I fail every single time!!! It's becoming pointless, but, I'm going to try posting a comment in the hopes that by a slim chance someone will know what the problem might be and lend a hand. First some info:

I'm using a 1.6 GHz PPC iMac running 10.5.2 and iTunes 7.6. My iPhone is an 8GB from week 41 and was updated to 1.1.3 shortly after it's realease. It is locked with AT&T and has never been tampered with...

OK, so I downloaded 1.4 and when I open it and try to begin a Jailbreak it reports that it is generating RAM disk and for a moment I see it created but then it vanishes and I receive 2 error pop-ups. The first says: "Error occurred while creating the RAM disk" and once I click OK, the second one pops up and says: "Error obtaining RAM disk file". So once that happened, I read through every comment on this page and I force quite iTunes Helper, attempted to locate the file "ramit112.dat"to delete it but for one I can't perform a right click, but I did a control button and mouse clilck and was able to get the the Resources file but there was no .dat file to be found. The only ramit112 folder was a .zip folder and after unzipping it I did not find the .dat file either. One of the last things I've tried was locating the iPhonefirmware112 backup and deleted that, but none of these steps have resulted in ANY progress. Am I just a lost cause? Any help would be greatly appreciated. Thank you!

-Ron PDXRon31@gmail.com

NEVERMIND! I just downloaded iJailBreak 0.5.3 (iJailBreak0.5.3.zip) and it installed in 10 seconds. Another 90 seconds later my iPhone is Jailbroke and has Installer 3.0 on it! I can even unlock it now too if I want....WAY easier than wasting 3 hours trying to get iNdependence to do the job!

i also using iJailBreak 0.5.3 to unlock it, when i want install the SSH by iNdependence, but i cannot using iNdependence to jailbreak again, so i can not using iNdependence to install SSH, i hope you can fix it Thank you

Thanks for your work on Independence, great program and been using it since the beginning.

Noticed that my Edge icon is now a filled in square when using edge/GPRS instead of the 'E' icon I used to get. Was previously using turbosim and this is the first time ive done a soft sim unlock so assuming that's why. Purely cosmetic but my two cents anyway.

I have unlocked 2 1.1.3 OTB phones and it worked well. On both occasions the initial unlock failed and had to be repeated. On one of the phones the camera didn't work and mail crashed. I restored the firmware again using itunes and then reactivated and unlocked using independence. All working well now. I have also tried it on a OTB 1.1.2 and this also is now fully functional. Thanks for the hard work it is most appreciated.

@opera... hope we can look forward to a Pre Firmware Upgrade that prepares our phones so that we can jailbreak / activate afterwards... much like what you have done for the 1.1.1 upgrade to 1.1.2.

Cheers!

can someone please help. i am now on an unlocked jailbroken 1.1.3 but i cant get signal on anything bluetooth,wifi,phone etc. someone mentioned signal.app or something but how do i go about this? this signal loss only happens after unlock through iNdependance???? please someone?? ps living in ireland??

@opera

Thank you so much! I unlocked a 3 iPhones 1.1.2 OTB after upgrade it to 1.1.3 with 1.4beta2 very smoothly :) Also I wrote a small russian how-to here: http://skrew.org.ua/2008/02/iphone-otb-112-updated-to-113.html

I was unable to use the script to decrypt the ramdisk. I was getting the "bad decrypt"-error. I just found out this was happening because the script was using the openssl version from macports instead the one found in /usr/bin/. If you use /usr/bin/ it will work.

Apparently, something is wrong with how you try to decrypt the image. :/

I was a 1.0.2 user and I've virginized, restored 1.1.3 with iTunes and used ZiPhone? 2.2 (now 2.4) to activate/jailbreak/unlock. All that in 2.5 minutes. Truly amazing. And it included Installer.app as well. I've used it for a day now and finally found the lyrics (you need to tap on the screen to see them!) and I'm soooooooooooo happy!

Michael

PS: Still has a problem with reverse lookups of the address book

PPS: The "locate me" feature in the maps works in Hong Kong. AMAZING! Because I used "restore" 1.1.3 I have modem firmware 04.03.13_G. With all 3rd party apps and unlocked!

-Michael

The locate me feature works in Kenya :O

Yeah the macports openssl is busted and can't decrypt. You have to specify /usr/bin to be certain it will work... found that out when someone tried to use one of my ramdisk scripts last night and couldn't get it to work, even though the script works fine for everyone else that's tried it.

I just made a rare finding heres what happened. I jailbreak activated and unlock my iPhone 1.1.3 OTB whit iNdependece out of curiosity since most apps don't work on 1.1.3 FW i decided to downgrade to 1.1.2 so i did put the iPhone in DFU mode "restored" back to 1.1.2 and to my surprise iTunes didn't gave the usual Error 1015 it just went through activation, I far as i aware that isn't suppose to happen. Can anyone try this and confirmed it?

nice! took many tries, but i've now got a jailbroken 1.1.3 phone, with installer working. had to use nounousomes's ssh commands. and installer does not work with my wiFi, it only works with edge. as expected, some apps don't work, including, most disappointingly, customize. i loved changing the springboard strings, and that doesn't seem to be working.

but nice work everyone!

to get t-mobile edge working you need to add a few settings manually. settings-> General-> Network-> EDGE-> APN: wap.voicestream.com User:guest pass:guest. this will allow you on to the t-mobile edge network.

Endless loop << BSD root: md0, major 2, minor 0 >> ( how I got out of it - for me at least )

I 'was' on 1.1.1 after upgrading straight from 1.0.2, but I had a phone crash and also stupidly tried to upgrade to 1.1.3 ( when I need it to be SIM FREE ), this made me downgrade to 1.0.2 for a week or two, but after trying to get back to 1.1.1 I ran into this problem - If you are getting this every time you launch Independence 1.4beta - BSD root: md0, major 2, minor 0 BSD root: md0, major 2, minor 0 BSD root: md0, major 2, minor 0 BSD root: md0, major 2, minor 0

I put the phone into a restore mode ( the one where you hold down both buttons, then release when the apple logo appears )

I then opened the GUI version of ZiPhone? 2.4 for OSX

Clicked the 'Advanced' tab - and checked Exit Recovery ( Normal Reboot )

and hit 'Start'

The phone started up in the verbose text dumb mode, but I could tell it was different.

It all flicked past so quickly at first, but I could make out something to do with 'if you want to alter files' and 'fsck'

It then started to erase sectors and patch sectors.

I have no idea whether this was Ziphone doing all this and I was just seeing the trace, or what?? ...but my phone appeared in activation mode and it seemed to activate itself and now it works. I also seem to have "Installer" pre installed.

I am at 1.0.2 now, but at least it works as a phone etc. I will try to upgrade it back to 1.1.1 again at some point.

...also if I open Independence - the status line at the bottom says Connected to iPhone • Firmware 1.0.2 • activated • AFC connection • jailed Trying to Jailbreak it in Independence fails to Jailbreak it. I tried it in "Ziphone" and it worked and did the verbose text reboot so it was Ziphone that was doing all this.

I have never had to unlock my phone prior to 1.1.3 because I have a non-AT&T account. Activation was good enough. I am reluctant to unlock my phone in fear that I can't get it back to virgin state. If I unlock it now with in 1.1.3 with iNdependence or ZiPhone?, can I still get it back to a virgin state if needed?

hey operator remember me SJobs from irc.osx86.hu irc dude aint spoke in a while so if you want come join us over there you know the chan if not #iphone you will find me long time though nice to see these guys keeping you young

What I discover about the "BSD root: md0, major 2, minor 0" error is that it has to be witht your net configuratión if you are not clear to download the file from the apple sever it will crash all your procces, you need to get a clear line to le the independen download the file to your iphone updates folder at "user/user/libreries/itunes/iphone uptade files/" the file that the iNdepennce use is the one that it use to restore the iphones to the 1.1.2 firmware, but even if you copy it to the folder, the command line needs to get connected to the internet and download it by it self

I have successfully: Unlocked a OTB 1.1.2 that was stuck in recovery mode after a failed downgrade attempt by updating to 1.1.3 and performing the activation/jailbreak/and SIM Unlock.

Can I:

Upgrade/Restore a 1.1.1 OTB that has been downgraded to 1.0.2, jailbroken and SIM unlocked •to• 1.1.3 and perform the same activation/unlock without any worries of bricking the iPhone?

Thanks for the heads up

-KD

I successfully jailbroke a fresh 1.1.3, used the permissions tweaks in the above comments to get around the Installer errors, but am encountering something odd. I've uninstalled SSH through iNdependence, and installed OpenSSH through installer.app

Connecting yields this error: ssh_exchange_identification: Connection closed by remote host

if I uninstall OpenSSH (through installer.app), and re-install SSH through iNdependence, everything works. any idea what is happening?

I think with OpenSSH through Installer only allows you to login in once. As soon as you close the connection you have to reinstall it through Installer.

Now, for the ultimate question. I am on 1.1.2, used iPSF back at 1.1.1. I would love to get to 1.1.3 with 1.1.3 baseband. Can someone help?? chris.wanja@mac.com

i deleted the "ramit112.dat" file and launched installer again but now i get this message..... "singleuser boot -- fsck not done root device is mounted read-only

if you want to make modifications to files: /sbin/fsck -fy

any help?

> I think with OpenSSH through Installer only allows you to login in once. As soon > as you close the connection you have to reinstall it through Installer.

This is most definitely NOT true.

This returns to be a very crashing form to jailbreak or activate the iphone, i found that the ziphone is a very and easy way to do the work!

hey guys haveing a problem, same as some other people:

Singleuser boot -- fsck not done Root device is mounted read-only

If you want to make modifications to files:

/sbin/fsck -fy /sbin/mount -uw /

If you wish to boot the system:

exit

Feb 14 04:02:14 launchd10?: can't exec /bin/sh for single user: No such file or directory.

would love to get some help..

snakeanhell...i had the same problem too...so i did it the long way! i used this site... http://www.hackthatphone.com/113/iphone_unlock_46bl_113.html i have a 16gb 4.6 BL and it worked perfectly if u are unlocking as well.....there are various methods on there that are very helpful.

i get the same error

Singleuser boot --- fsck not done Root device is mounted read-only

If you want to make modifications to files:

/sbin/fsck -fy /sbin/mount -uw /

If you wish to boot the system:

exit

Feb 21 22:12:13 launchd8?: can't exec /bin/sh for single user: No such file or directory

My experience -- hardware: 1.1.2 phone activated with iNdependence iBook G4 with Mac OS X

1. restored/upgraded with iTunes 7.4 to 1.1.3

2. quit iTunes, force quit iTunes helper 3. run iNdependence 1.4 click on Activation; gets stuck -- force quit iNdependence and re-run Activation 4. works the second time 5. click on Unlock -- gets stuck the first time 6. force quit iNdependence and run Unlock again -- works this time

What works?

• phone (with T-Mobile)
• mail (T-MobileWeb?/T-zones $5.99)
• WiFi?
• etc.

What does not work?

• locate-me feature in maps
• Edge
• Bluetooth

I have an iphone 1.1.3 & iTunes 7.6 and when I try to activate with the iNdependence beta3 (newest one added today) I get the following message: Error Couldn't modify RAM disk.

Any help?

i recommend ziphone for everyone!!! i was trying to use independence and it didnt seem to work and it messed my phone up. (not badly but it did) i downloaded ziphone and i had my phone unlocked in 3 minutes or so!...i even helped my bro unlock his phone with ziphone.

I have an iphone 1.1.3 OTB (baseband version: 04.03.13_G / firmware version iboot-204.3.14 / build version 4A93) & iTunes 7.6 I try to activate with the iNdependence beta3. I get the following message: Error: Couldn't download firmware file. (I can only choose OK button) and the next message says Failed: RAM disk creation failed. Would you like to try again? That don't work also...

Maybe I was stuppid to activate with iTunes first. I stopt with the screen that's give me 3 options for a AT&T service plan...

Any help?

Hi,

I'm running iNdependence 1.4 beta 3 on10.5.2 with iTunes 7.6.1 (9).

I used ZiPhone? 2.4 to activate, jailbreak and unlock my updated 1.1.3 (originally 1.1.2 OTB) iPhone. Everything went ok, except ZiPhone? ended with 'error 1'. No big issue probably, because everything worked fine (phone,SMS, etc.).

When I start iNdependence 1.4 beta 3 afterwards (just to check if everything was ok) it showed that my iPhone is activated, but still jailed and SSH is not installed.

Just to let you know, keep up the good work!

Greetings from the Netherlands !

Hi (Hallo, rlvdijk)

Thanx for the tip of ZiPhone? 2.4. Everyting works great. iPhone is activated!

Groeten, (M)

Hello and thanks for the great software. I had no problems activating my phone (running 1.1.3 and iTunes 7.6.1 but when I tried to do a SIM unlock it kept trying to find SIMunlock but never found it - stayed waiting.

I tried to find SIM Unlock at a few other places but it appears its gone missing -any advice?

Hi there! I just unlocked my 16GB iPhone using v1.4 beta3 on a Macbook Pro with OS X 10.4.11, I had to run the SIM unlock twice for my SIM to work. Insalled SSH and Installer.app, everything seems to work O.K., except for Bluetooth (can´t find any devices). Thanks a lot duh! and greetings from México Ivan.

yep me too just ran Ziphone and everything worked flawlessly.

wow read through nearly all comments but couldnt find my error. had an 1.1.2 iphone with supersim and jailbroken had it restored and updated to 1.1.3 tried to run independance pressed activate phone downloaded a firmware for ages, because of that i quit independance and relaunched it now everytime i click activate phone (or anything else) it says: couldnt extract firmware file contents restored it twice ( even downloaded the firmware again) completely deleted independance and redownloaded and installed it twice

but i still get the same error....

would be great if anyone can help me!!

thx

Is it possible to jailbreak and install ssh using independence after unlocking/ jailbreaking and activating sim with ziphone? i'm trying to get to the customize function in independence.

right ill try with ziphone, but can anyone mail me downloadlink? all the ones i could find were somehow broken and didnt work

just wanted to let you know that i was able to jailbreak and activiate my iphone 8gig with your program! then i used installer to download anysim and unlock it it had 3.9 bootloader, on 1.1.2. i now i have newest firmware, unlocked, activated, jailbroken 1.1.3 thanks!

just activated my iphone (1.1.3) with indipendence, jailbroken etc... everthing worked fine. wanted to SSH installer: No WIFI, no phone, no bluetooth... Tells me it to send it to apple for repair!

Any advice how to proceed? maybe a result of former anysim-attempts? Thanks!

christ...@subline.biz: Try SIM unlocking again. Sometimes gunlock fails partway through, but iNdependence doesn't detect this failure and says that it was successful. The SIM unlock usually succeeds the second time through.

bart...@mac.com: Open Finder and go into HOME/Library/iTunes/iPhone Software Updates/, then delete the file named iPhone1,1_1.1.2_3B48b_Restore.ipsw

Now run iNdependence again and wait for it to finish downloading this time. :) The firmware file it needs is 160MB, so it'll take a while to download.

please...add the support for iPhones already jailbroken with Ziphone, i know it lack of AFC2, but please, i prefer install SSH through independence than install BSD Subsystem and then OpenSSH...please, do something, thank you.

@operator: can you please release your version that can only jailbreak / avtivate 1.1.4? I have iPSF so I don't need the unlock that much. TIA.

I second that request for the pre-release version just for jailbreak and activation of 1.1.4. Thanks heaps

ok, you guys got it. 1.4 beta 4 works with firmware 1.1.4 (except for SIM unlock). It also fixes a lot of bugs with the RAM disk creation process.

After zibri collectively reamed the community with Jerry, I wouldn't use ziphone if it were the only unlock that existed. I was looking to iNd for something NOT ziphone, but apparently I need to look elsewhere.

@tjosephcarter: Just to confirm, I never collaborated with Zibri in any way. I simply used the same jailbreak method which he learned from the dev team. I was unaware at the time that others had originally conceived of that method. I plan to put proper credit in the next release of iNdependence as I do with all of the technologies I integrate into it.

The latest beta cannot download the firmware.. Errors out

Operator, I sent you a version of gunlock that will unlock 1.1.4 directly (but only for 3.9BL iphones), instead of needing to use patched 1.1.2 baseband. Also, as miteybites points out, Apple has removed the 1.1.2 ipsw from its servers. The 1.1.4 ipsw file is there though :)

I second what mitebytes said earlier..

operator... great work yet again! just curious, any way to not kick the modem firmware back down to 04.02.13_G or maybe have the Pre-Firmware upgrade utility you had for 1.1.1 to 1.1.2 feature?

Cheers! and take care.

I third what miteybites and fzanicotti said .... "Couldn't download the firmware file" Error ....

I currently have a 1.1.2 JB iPhone with bootloader 3.9 unlocked with IPSF. Can i use 1.4 beta 5 to upgrade to 1.1.4 and either have the IPSF unlock stay intact or will the SIM unlock in 1.4 beta 5 unlock 1.1.4 for me. Also which of the basebands will i be getting 04.04.13_G (1.1.4), 04.03.13_G (1.1.3) or 04.02.13_G (1.1.2)??

I fourth what miteybites, fzanicotti and ryanhuang77 said - "Couldn't download the firmware file" Error ....

1.1.4 iPhone, activated, jailed

Hello guys, I am getting the 1403 error while updating manually and my firmware file gets wiped, also the size is 139 Mb? It fails while downloading firmware from iTunes, any help?

@Operator: check what musclenerd said 7 hours from this posting. He is right!

I just tested and the 1.1.2 firmware download link iNdependence uses is fine:

http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-4037.20071107.5Bghn/iPhone1,1_1.1.2_3B48b_Restore.ipsw

Also got the Error

Error Couldnt download firmware file //OK// Ramdisk creation failed. oOuld you like to try again? //YES// Error Couldnt download firmware file //OK// Ramdisk creation failed. WOuld you like to try again? //NO// Error - Error obtaining RAM disk file

I ran iNdependance 1.4 b5 on my IPSF unlocked 3.9bl phone (upgraded to 1.1.4) and ran "SIM Unlock Phone" (and activation) - works perfectly. Don't need Signal.app now. Reboot and I have signal :) Can someone tell me what iNdependance does with the 1.1.2 Firmware? Why does it need it?

If you get "Ramdisk creation failed" error, it's because you probably stopped the firmware download halfway through. I did the same because I already had the 1.1.2 firmware required so I just copied it to my ~/Library/iTunes/iPhone Software Updates dierctory to avoid the download again. DEV: You may want to add this to your readme??

@piksel8: It needs the baseband from the 1.1.2 firmware because it downgrades your baseband to the version which comes from 1.1.2 (04.02.13_G) in order to SIM unlock it. This is the only SIM unlock method which works for all bootloader versions.

@piksel8: That's exactly where iNdependence downloads the 1.1.2 firmware file to (and it checks for an existing version of it). If you have a half-downloaded or otherwise corrupt copy of it there, then iNdependence will fail.

@ opera & piksel8

cheers - ive been downloading manually, so had to create the library folder and copy 1.1.4 in there, and its downloading 1.1.2 nicely now

@anything.atall: You shouldn't need to create the Library directory, it should already exist since just about every application uses it. I think it's created by default when you install Mac OS X (and your user account is first created).

Dear Dev,

I use iNdependence unlocking my iPhone since it was 1.0.2, 1.1.1, 1.1.2, 1.1.3 and now... 1.1.4! It'd always recovered my phone from trouble and everything worked fine everytime.

Don't think nobody love you, except me! I love you! :-)

Well, I wouldn't go so far as to actually claim to "love" you 0p, but I am extremely pleased that you are out there....

@opera,apologies, should have been specific, i meant the updates folder @ Lib/iTunes/'iPhone Software Updates'

There was no folder there as ive only ever downloaded the updates manually, creating the 'iPhone Software Updates' folder was all i needed to fix the RAM Error message.

cheers dudes, top job on this.

You are a hero getting this out so quickly after apple released 1.1.4. we (read: regular users) would be nowhere without your help and efforts

Thanks for sharing the love guys. Love Saves the Day. ;)

@daniel: Yes. @steven: Can you open /Applications/Utilities/Console, clear the log, try again, and copy and paste what's in Console to here?

getting a bit confused with baseband version now. once unlocked is it 04.02 or 04.04...

@tinyhunter: 04.02

couple of issues I've noticed:

1. File/directory ownership is being set wrong. The mobile user is in group 'mobile' (verify via /etc/passwd, /etc/group) so you have to chown -R mobile.mobile /var/mobile for it to be correct.

2. Instructions for installer.app omit the important chmod +s on /Applications/Installer.app/Installer - without this it won't run

3. If you've upgraded from 1.1.3 installer.app thinks all the previous apps are already instaled.. this is probably an installer issue but needs pointing out (wiping /var/mobile/Library/Installer/LocalPackages?.plist is one solution, and what I did, but there may be better ones).

4. SIM unlock needs work. I got the following sequence: Try 1. Independence locked up Try 2. Seemed to work but baseband was hosed (no wifi, etc.) Try 3. Independence locked up Try 4. Worked successfully

Google Locate Me doesn't work, as the Baseband is downgraded to the 1.1.2 version equivilant. As for the YouTube? fix, install the BigBoss?'s Beta Source, then go to the Unlocking Tools folder and install YouTube? activation.

if you install Navison or LocateMe?, run the apps then, the Google Locate me works..

sorry i should have added more.. with Installer, if you have Installer on your iPhone, download Navison OR LocateMe?, run either of them, then if you open iPhone's Google Maps, the Google Locate me seems to then work..

Mail not working with Edge data connection. Anyone else having this issue?

I have used iNdependence to activate and jailbreak my new 16 gb iphone and I keep getting a SIM unlocking failed... Any ideas?

Anyone have a link to the YouTube? fix?

Started from 1.1.2 unlocked IPSF with bootloader 3.9. Used iTunes to upgrade to 1.1.4, activated and jailbroke using 1.4 beta 5 then installed signal.app. I figured I'd rather put up with it if I get the new baseband which supports locate me (one if the reasons I decided to update).

I also figured I rarely turn the phone off so its not that big a deal. Anyway now running 1.1.4 with 04 .04 baseband with EVERYTHING working and typing this from the phone right now. Thank you creator of iNdependence and others

I accidentaly cancelled the firmware download, and now i can't get it to download it again...

What do i do? I suspect is has something to do with the program not being able to extract the firmware details?

Started with 1.1.1, broken with jailbreakme.com and sim freed with AnySIM. Flawless update to 1.1.4 with iTunes 7.6.1. Hung at attempt on activation. Force quit. Try jailbreak. Hung. Force quit. Try jailbreak again. Success! Activate. Success! Install SSH. Success! It took at least a half-dozen attempts to get SIM unlock to work, though. For those of you having troubles, just keep trying!

All in all, much less painless than my update from 1.0.2 to 1.1.1. Everything working fine so far. Now off to get installer.app....

Well, as I noted above... I cancelled the firmware download :S And somehow I can't get it to try again...

BTW, does anyone know if you can download it yourself, and put it in the appropriate place?

I confirm that Independence 1.4 beta worked with my IPSF unlocked phone 1.1.1. I tried to use signal.app but it did not work. I then proceeded to use sim unlock and it succeeded! no errors. thank you opera...now i need to get installer back to my iphone.

p.s. locate me does not seem to work , will try to install Navizon..or locate me...goodluck guys!

worked like charm! thx mate...

@ anything.atall ... "i meant the updates folder @ Lib/iTunes/'iPhone Software Updates' "

Thank You, Thank You !!! I was getting the "Couldn't download the firmware file" Error .... (as are many others based on comments here and in the Issues tab discussion). I created the folder in the filepath as per anything.atall ("iPhone Software Updates") and iNdependence worked fine after (file downloaded without problems).

Everything worked fine after ... Thanks again and to @opera - awesome program!

just want to say a big thank you to independence. The 1.4 beta5 has worked like a dream. I am very grateful. You guys are great, I know its a lot of time and work. from Steven in London.

I've installed Installer using independence, but when I try to install anything I get: "Main Script Execution Failed" I'm not very technical, can someone explain what I should do to get Installer working? big thanks.

After manually add installer as suggested above without ssh into iphone and chmod 777 As seem iNdependence 1.4 beta claim it will setup the permission while following the step. Get main sript execution... when install BSD 2.1 using the installer. Google search someone say chmod +s /Applications/Installer.app/Installer then it works.

upgraded to 1.1.4 firmware ran iNdependence and got the endless loop << BSD root: md0, major 2, minor 0 >>

restored software, ran iNdependence again got the same problem: endless loop << BSD root: md0, major 2, minor 0 >>

please help

Again!!, this jailbreak doesn't work fine to me, first i always got the RAM error message and after the exit app inside the iphone!, no way!, i asked and somebody sent me the new Ziphone app, which is available for Microstucks Vista by the way, and in around 15 minutes, i have my iphone F1.1.4 activated, sim unlocked, and all stuff ready to be used!....

alan.py.lam this is probably a stupid thing to ask, but how do i chmod +s for example? I'm not a technical but i have been able to use independence all ok..

my computer doesnt know what to open independence with

what do i do?

USE ZIPHONE EVERYONE!! IT JAILBREAKS AND UNLOCKS 1.1.4 AND GOOGLE MAPS IS UP AND RUNNING!! ITS THE EASIEST THING EVER AND DOESNT BRICK THE PHONE. GO TO WWW.ZIPHONE.ORG

any news on fixing the problem with changing the passwords for users "root" and "mobile" yet? like many folks, I am not really comfortable installing things until that is fixed, as it leaves a huge security hole.

UPDATE: I just noticed that using the Signal.app method for IPSF users means your sounds becomes VERY low and almost inaudible every time you run the app, apparently this is a side effect of restarting the comm centre. The 'workaround' i've found is to temporary insert headphones and then remove them again to get full sound.

Looks like Signal.app is starting to become a chore and i'm seriously considering unlocking with ZiPhone???'s method. By the way why isn't iPhoneSimFree themselves saying anything regarding the last two updates. They havent said anything since Nov 2007...whats with the silence??.

They should at least let their customers know if they're working on a new version of IPSF or if they've stopped development. The only reason that i use Signal.app is for the 'just incase IPSF releases a new app scenario'

I think it's weak/lame/stupid/insulting they haven't said anything

UPDATE 2: Restored and Activated/Jailbroke with iNdependence and then re-unlocked with ZiPhone?. I didn't want to do it especially after hearing that Zibri shafted the dev team but i couldn't be bothered with the hassles of Signal.app either nor IPSFs chillin silence.

Now running 1.1.4/04.04.05 JB+Unlocked. Thanks to iNdependence/Geohot and even Zibri

Does anyone know how to get Edge working with t-mobileWeb/t-zones? Thanks.

I used independence 1.4b5 to activate/jailbreak/unlock 16gb 1.1.3 iphone. it worked perfectly, after a while I had problems with itunes detection of it. I thought I would "upgrade/restore" to 1.1.4 and use independence again to jailbreak.

After iTunes was done with the "Restoring iPhone Software" stage, and during the "Verifying iPhone Software" stage, iTunes stopped and exited with the message "Unable to restore phone. Unknown error (6)".

Now my phone is not working.. I get the recovery screen when I open it (the iTunes Logo with the Cable" .. I tried 1.1.4, 1.1.1, 1.0.2, and 1.1.3 restore ipsw images with iTunes 7.6.1, none worked..

What can I do ?

And for those who have 1.1.3 and used independence, please be warned from upgrading to 1.1.4 or restoring using itunes..

Please help

Try any of the following:

1. Reset the phone and try again

2. Restart the computer and try again

2. Remove the phone from dock, close iTunes, remove SIM card and dock the iPhone again without the SIM card using another USB port and try restoring again

3. Put the phone into DFU mode and try restoring again

Just to offer some comments on my experiences with 1.4b5

I was able to activate/jailbreak/unlock an OTB 1.1.3 16gb iphone yesterday without problems. Today I decided to try 1.1.4, so I restored the iphone with 1.1.4 firmware, and then tried to go through the same process - this time I successfully activated/jailbroke it, but got a sim unlock failed error. After that the phone was very unstable. After mucking around a bit, I was able to restore it to 1.1.4 again (took a couple of tries though). I went through the process again and got the same result. I tried unlocking again after the first failure but had no success - ended up getting an iphone needs repair error. I restored the iphone once again, but back to 1.1.3, and was able to activate/jailbreak/unlock successfully.

A friend has used independence to unlock his 8gb iphone with 1.1.4, but I'm unsure whether his boot loader is 3.9 or 4.6. The way I see it, there appears to either be an issue with 4.6/1.1.4 or 16gb iphones/1.1.4 when unlocking (or perhaps both).

Looking at the output of iPhone Updater Logs, here is what I see: 2008-03-04 23:45:00.000 iTunes2704:13077?: <Restore Device 0x19a6d050>: operation 13 progress 100 2008-03-04 23:45:00.000 iTunes2704:13077?: <Restore Device 0x19a6d050>: operation 14 progress -1 2008-03-04 23:45:04.000 iTunes2704:13077?:

device restore output

entering wait_for_storage_device entering create_filesystem_partitions executing /sbin/newfs_hfs Initialized /dev/rdisk0s1 as a 300 MB HFS Plus volume executing /sbin/newfs_hfs Initialized /dev/rdisk0s2 as a 15187 MB HFS Plus volume entering restore_images executing /usr/sbin/asr Waiting for connection attempt from server

Validating target...done Validating source...done

Warning: the target volume may not be bootable

Erasing target device /dev/disk0s1...done Retrieving scan information...done Validating sizes...done Restoring ....10....20....30....40....50....60....70....80....90....100

Copied 255652352 bytes in 80.74 seconds, 3092.32 KiB/s

Verifying

Could not restore - Device not configured

end of device restore output

2008-03-04 23:45:04.000 iTunes2704:13077?: <Restore Device 0x19a6d050>: Restore failed (result = 6)

What does this mean ?

I am wondering what the firmware version that starts with iBoot in the info tab on Independence is related to?

I used ZiPhone? to TRY and unlock my 1.1.4 phone (1.1.3OTB) simply so I could keep the newer baseband and I used Independence to activate/JB.

But as far as I can tell the bootloader downgrade and unlock failed as when I put a different SIM in the phone it doesn't work if its not the contract iphone SIM but I do not know if the bootloader was downloaded or not - I was wondering if the iBoot refers to the bootloader?

I have a 1.0.2 IPSF unlocked and upgraded to 1.1.4 using Independence as well as my UK contract iPhone and they both have the same iBoot number in Independence so is that because they have the same firmware and bootloader or does it mean something else? Thanks.

Hello,

Also, I would like to poll the interest of users here(and elsewhere) regarding bundling Cydia Packager with iNdependence, so that when the iPhone is initially jailbroken/unlocked, Cydia Packager is installed, thus making it an easy, no-brainer introduction for iPhone users. Prior to the unlock, the user should have a iNdependence menu selection offering him/her the option to install Cydia Packager(and it's subsystem), or Installer(and it's subsystem). This way the choice is afforded the user.

For those of you who are unaware of Cydia Packager, please visit http://www.saurik.com/id/2 and read Jay Freeman's article regarding Null River's (AppTapp?) Installer, and this will provide some back-story . Cydia Packager is in effect the same type of application as is Installer. However, it's OPEN SOURCE, it's based on proven efforts, and it's overall a better solution IMHO. I am of the personal opinion that the sooner the iPhone community moves to an entirely open source package installer application for the iPhone... the better-off it will be.

For months now, nullriver has indicated they would release source code for the Installer app, but to date it has yet to be seen. Clearly this relates to posturing, where they are 'waiting and seeing' what will happen with Apple's SDK, and the future of application management/installation on/for the iPhone. This is an indicator of sorts, that nullriver wishes to maintain ultimate control over Installer(implied and assumed), in which case they should just say so(shit or get off the pot).

However, even if they 'did' decide to open a subversion repository tomorrow, with the Installer application code available for the community, I still believe the community would be best served having and promoting Cydia Packager, so that 2 iPhone package installer applications are readily available, and are promoting healthy advancements in each their own functionality, and usefulness. This results in a more active development, and more options and less bugs in a shorter period of time, and over time, the better application will emerge as the winner/standard, which is the way it should be!

So, i would ask the maker of our beloved iNdependence, to include Cydia Packager in his iNdependence builds, along side Installer, so that both are installed onto the iPhone, both being immediately usable by the end user(choice!). And of course, I would encourage any/all of you to install Cydia Packager onto your iPhone, and give it try for yourselves. However, until Cydia Packager is being installed onto the iPhone just as Installer is(from the get-go), you will need to install Cydia Packager via Installer(i know, it's a means to an ends).

Please take note of the following when you install Cydia Packager:

Install Cydia Packager - this takes about 10-20 minutes. Install Fake BSD Subsystem - this will tell all BSD dependant applications that are installed via installer that the 'latest' version of BSD is installed. This is needed, because once you've installed Cydia Packager, you will no longer want to install BSD Subsystem updates. In fact, you may no longer want to use Installer application, and may likely only continue using it for the time period it takes to get all of the software applications packaged for use with Cydia Packager. Remember, Cydia Packager is a REPLACEMENT for Installer, one that is OPEN SOURCE, and one that is much more POWERFUL.

If you would like to become involved in the Cydia Packager OPEN SOURCE project, jump over to the subversion/trac website, register, and poke around. It is just getting started, so it's as good a time as any, to join in, and to help report bugs, suggest/request features, and assist in putting together documentation, tutorials, and so on. Cydia Packager is new, and largely the work of just a few people(at this point), so there are some bugs and shortcomings, however, with you and others installing Cydia Packager, and aiding in it's use/testing/development, bugs should quickly disappear and features quickly added... hope to see you there!

http://www.telesphoreo.org/

Eric Jarvies

SSH iPhone to activate installer.app via FTP software

after installing SSH via independence and adding the installer app via iNdepedence and the link above do the following:

1) get the IP address of your phone: in your iPhone under > setting > Wifi > choose your network > blue arrow for more info > IP Address you will need your password which, if having followed the iNdependence instructions should be something that you came up with

2) open cyberduck, transmit or some other FTP software

4) enter the following: server: (your iphone ip address) user: root password: (your ssh password for your iphone) protocol: (sftp)

5) once connected, go to the dropdown menu that takes you to the root directory. It should look like the following "/"

6) right click on "applications" and select (get info). You should see a number that is set to 755. Change that to 777.

drill down to installer.app and then installer and do the same (setting 755 to 777)

Now you should see the installer on your iphone. The problem I have had though is that I can't download any apps via installer. I get the immediate message "Package download failed"

I am getting a WiFi? problem where the signal will bug out. I'll be using my phone, then suddenly the wifi signal goes to nothing and edge shows up. I go to general and it says that i'm still connected to my network with full signal. The only way to get it to work is to say forget network then rejoin. Such a pain. Is there a solution?

I have a few questions.. In a future I want to upgrade to Iphone version 2.0, I own an IPhone 1.1.2 OTB restored to version 1.1.4 using Independence, also I used the Unlock method that independence have but the modem firmware put it to version 04.02.13_G. If I do a restore again: a) ¿Do I have to unlock it again? b)¿Can it be restored back to version 04.04.13_G?, I want to develop with the SDK and want to use the locate features that is on Google map but I am on a older boot loader.

guys, I am getting the same error using Independence (got a 1.1.4 phone, bl 3.9) - cannot extract and create ram disk. What should I do?

Thank you! please respond to sergey.eastwestduo@gmail.com

Just used 1.4 Beta, Firmware release was 1.1.4 previously unlocked with Ziphone, did a reset using Ziphone after some bad app installs, but am away without the original AT&T sim, so could not re-unlock with Ziphone. Independence activated without any issues, and left modem firmware at 04.04.05_G. Phone was automatically unlocked for any sim. Google Maps Locator working!

This is a really nice piece of software, keep up the good work.

and yes, i followed some advices here and do have the 1 1 4 and 1 1 3 in my update iphone folder. Does it mean that my 1 1 4 file is corrupt? I was able to do a full restore to 1 1 4 with 0 problem.

could someone advise please? thank you!

What about iPod touch?

Hmm, 1.4 beta 5 and iTunes 7.6.1 (latest MobileDevice?.framework too :)). Weird crash when you plug a recovery mode in (or if a phone goes into recovery mode - i.e. activation/jailbreaking)

Process: iNdependence 4958? Path: /Applications/iNdependence.app/Contents/MacOS/iNdependence Identifier: com.operator.iNdependence Version: 1.4 beta 5 (1.4 beta 5) Code Type: X86 (Native) Parent Process: launchd 102?

Date/Time: 2008-03-20 11:45:51.439 -0700 OS Version: Mac OS X 10.5.2 (9C31) Report Version: 6

Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x000000003c3a71d7 Crashed Thread: 0

Thread 0 Crashed: 0 ??? 0x3c3a71d7 0 + 1010463191 1 libPhoneInteraction.dylib 0x00022c9c PhoneInteraction?::recoveryConnectNotificationCallback(am_recovery_device) + 34 2 com.apple.mobiledevice 0x00117601 AMRestoreEnableFileLogging + 2812 3 com.apple.mobiledevice 0x00117aa4 AMRestoreEnableFileLogging + 3999 4 com.apple.mobiledevice 0x00115f58 AMRestoreRegisterForDeviceNotifications + 114 5 libPhoneInteraction.dylib 0x00021f17 PhoneInteraction?::subscribeToNotifications() + 161 6 libPhoneInteraction.dylib 0x0002909d PhoneInteraction?::getInstance(void ()(char const, bool), void ()(int, char const), bool) + 91 7 com.operator.iNdependence 0x00005596 -awakeFromNib? + 254 8 com.apple.CoreFoundation? 0x91636a55 -makeObjectsPerformSelector:? + 181 9 com.apple.AppKit? 0x939b1ec2 -nibInstantiateWithOwner:topLevelObjects:? + 1533 10 com.apple.AppKit? 0x939a80ec loadNib + 264 11 com.apple.AppKit? 0x939a7a4d +_loadNibFile:nameTable:withZone:ownerBundle:? + 946 12 com.apple.AppKit? 0x939a7690 +loadNibFile:externalNameTable:withZone:? + 171 13 com.apple.AppKit? 0x939a75ce +loadNibNamed:owner:? + 391 14 com.apple.AppKit? 0x939a727e NSApplicationMain + 434 15 com.operator.iNdependence 0x000031e2 main + 24 16 com.operator.iNdependence 0x00002b52 start + 216 17 com.operator.iNdependence 0x00002a79 start + 41

Thread 1: 0 libSystem.B.dylib 0x92d7db3a select$DARWIN_EXTSN + 10 1 libSystem.B.dylib 0x92d5ec55 pthread_start + 321 2 libSystem.B.dylib 0x92d5eb12 thread_start + 34

Thread 0 crashed with X86 Thread State (32-bit):

eax: 0x002912c0 ebx: 0x0002293c ecx: 0x3c3a71d7 edx: 0x00035324 edi: 0x00003703 esi: 0x002912c0 ebp: 0xbffff488 esp: 0xbffff46c

ss: 0x0000001f efl: 0x00010206 eip: 0x3c3a71d7 cs: 0x00000017 ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037

cr2: 0x3c3a71d7

Binary Images:

0x1000 - 0x16fff +com.operator.iNdependence 1.4 beta 5 (1.4 beta 5) /Applications/iNdependence.app/Contents/MacOS/iNdependence

0x20000 - 0x34fff +libPhoneInteraction.dylib ??? (???) /Applications/iNdependence.app/Contents/MacOS/libPhoneInteraction.dylib 0xd0000 - 0xd1ff3 ATSHI.dylib ??? (???) /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ATS.framework/Versions/A/Resources/ATSHI.dylib

0x100000 - 0x125ff3 com.apple.mobiledevice 3.0 (3.0) <64f5714c72043ff048cf18902f6c10a1> /System/Library/PrivateFrameworks?/MobileDevice?.framework/Versions/A/MobileDevice? 0x1d5000 - 0x1deff7 com.apple.iokit.IOUSBLib 3.0.0 (3.0.0) <3dc62c82eabba24f96af44fad0b3aa83> /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns?/IOUSBLib.bundle/Contents/MacOS/IOUSBLib

0x8fe00000 - 0x8fe2da53 dyld 96.2 (???) <7af47d3b00b2268947563c7fa8c59a07> /usr/lib/dyld 0x90003000 - 0x90027fff libxslt.1.dylib ??? (???) <4933ddc7f6618743197aadc85b33b5ab> /usr/lib/libxslt.1.dylib 0x90084000 - 0x90117ff3 com.apple.ApplicationServices?.ATS 3.2 (???) <cdf31bd0ac7de54a35ee2d27cf86b6be> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x9042d000 - 0x9042dffc com.apple.audio.units.AudioUnit? 1.5 (1.5) /System/Library/Frameworks/AudioUnit?.framework/Versions/A/AudioUnit? 0x9049b000 - 0x904a5feb com.apple.audio.SoundManager? 3.9.2 (3.9.2) <0f2ba6e891d3761212cf5a5e6134d683> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound?.framework/Versions/A/CarbonSound? 0x904a6000 - 0x90979fde libGLProgrammability.dylib ??? (???) <a3d68f17f37ff55a3e61aca1e3aee522> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgrammability.dylib 0x9097a000 - 0x9097cff5 libRadiance.dylib ??? (???) <20eadb285da83df96c795c2c5fa20590> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x9097d000 - 0x909cdff7 com.apple.HIServices 1.7.0 (???) <f7e78891a6d08265c83dca8e378be1ea> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x909cf000 - 0x90a11fef com.apple.NavigationServices? 3.5.1 (161) <cc6bd78eabf1e2e7166914e9f12f5850> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices?.framework/Versions/A/NavigationServices? 0x90a18000 - 0x90a52fff com.apple.coreui 1.1 (61) /System/Library/PrivateFrameworks?/CoreUI.framework/Versions/A/CoreUI 0x90a53000 - 0x90a80feb libvDSP.dylib ??? (???) <b232c018ddd040ec4e2c2af632dd497f> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x90a81000 - 0x90ab8fff com.apple.SystemConfiguration? 1.9.1 (1.9.1) <8a76e429301afe4eba1330bfeaabd9f2> /System/Library/Frameworks/SystemConfiguration?.framework/Versions/A/SystemConfiguration? 0x90bfe000 - 0x90c78ff8 com.apple.print.framework.PrintCore? 5.5.2 (245.1) <3c9de512e95fbd838694ee5008d56a28> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/PrintCore?.framework/Versions/A/PrintCore? 0x90d06000 - 0x90e4bff7 com.apple.ImageIO.framework 2.0.1 (2.0.1) <68ba11e689a9ca30f8310935cd1e02d6> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x90e4c000 - 0x90f2bfff libobjc.A.dylib ??? (???) <a53206274b6c2d42691f677863f379ae> /usr/lib/libobjc.A.dylib 0x90f6e000 - 0x90ff5ff7 libsqlite3.0.dylib ??? (???) <6978bbcca4277d6ae9f042beff643f7d> /usr/lib/libsqlite3.0.dylib 0x90ffa000 - 0x91008ffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib 0x91009000 - 0x9100efff com.apple.CommonPanels? 1.2.4 (85) <ea0665f57cd267609466ed8b2b20e893> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels?.framework/Versions/A/CommonPanels? 0x91249000 - 0x91250fe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib 0x91251000 - 0x9152aff3 com.apple.CoreServices?.CarbonCore? 785.8 (785.8) <827c228e7d717b397cdb4941eba69553> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/CarbonCore?.framework/Versions/A/CarbonCore? 0x9152b000 - 0x9153bfff com.apple.speech.synthesis.framework 3.6.59 (3.6.59) <4ffef145fad3d4d787e0c33eab26b336> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/SpeechSynthesis?.framework/Versions/A/SpeechSynthesis? 0x9153c000 - 0x9166efef com.apple.CoreFoundation? 6.5.1 (476.10) <d5bed2688a5eea11a6dc3a3c5c17030e> /System/Library/Frameworks/CoreFoundation?.framework/Versions/A/CoreFoundation? 0x9174f000 - 0x91757fff com.apple.DiskArbitration? 2.2.1 (2.2.1) <75b0c8d8940a8a27816961dddcac8e0f> /System/Library/Frameworks/DiskArbitration?.framework/Versions/A/DiskArbitration? 0x91758000 - 0x917fffeb com.apple.QD 3.11.52 (???) <c72bd7bd2ce12694c3640a731d1ad878> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x9180e000 - 0x91811fff com.apple.help 1.1 (36) <b507b08e484cb89033e9cf23062d77de> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x91812000 - 0x91b1afff com.apple.HIToolbox 1.5.2 (???) <7449d6f2da33ded6936243a92e307459> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x91b1b000 - 0x91c53ff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib 0x91c54000 - 0x91c99fef com.apple.Metadata 10.5.2 (398.7) <73a6424c06effc474e699cde6883de99> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91c9a000 - 0x91cb2fff com.apple.openscripting 1.2.6 (???) <b8e553df643f2aec68fa968b3b459b2b> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting?.framework/Versions/A/OpenScripting? 0x91cb3000 - 0x91cbffff libbz2.1.0.dylib ??? (???) <9ea4fe135c9e52bd0590eec12c738e82> /usr/lib/libbz2.1.0.dylib 0x91cc0000 - 0x91d3cfeb com.apple.audio.CoreAudio? 3.1.0 (3.1) <70bb7c657061631491029a61babe0b26> /System/Library/Frameworks/CoreAudio?.framework/Versions/A/CoreAudio? 0x91e96000 - 0x91f21fff com.apple.framework.IOKit 1.5.1 (???) <a17f9f5ea7e8016a467e67349f4d3d03> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x91f22000 - 0x91f40fff libresolv.9.dylib ??? (???) <0629b6dcd71f4aac6a891cbe26253e85> /usr/lib/libresolv.9.dylib 0x91fb4000 - 0x91fc4ffc com.apple.LangAnalysis? 1.6.4 (1.6.4) <cbeb17ab39f28351fe2ab5b82bf465bc> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/LangAnalysis?.framework/Versions/A/LangAnalysis? 0x91fc5000 - 0x9207ffe3 com.apple.CoreServices?.OSServices 224.4 (224.4) <ff5007ab220908ac54b6c661e447d593> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x92080000 - 0x920dcff7 com.apple.htmlrendering 68 (1.1.3) <fe87a9dede38db00e6c8949942c6bd4f> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x920dd000 - 0x92473ff7 com.apple.QuartzCore? 1.5.1 (1.5.1) <665c80f6e28555b303020c8007c36b8b> /System/Library/Frameworks/QuartzCore?.framework/Versions/A/QuartzCore? 0x924a9000 - 0x9255bffb libcrypto.0.9.7.dylib ??? (???) <330b0e48e67faffc8c22dfc069ca7a47> /usr/lib/libcrypto.0.9.7.dylib 0x9255c000 - 0x9257bffa libJPEG.dylib ??? (???) <0cfb80109d624beb9ceb3c43b6c5ec10> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x9263a000 - 0x9266efef com.apple.bom 9.0 (136) <b72e1fd1d3bfd8c288381adb23775fd4> /System/Library/PrivateFrameworks?/Bom.framework/Versions/A/Bom 0x927bb000 - 0x92986ff7 com.apple.security 5.0.2 (33001) <0788969ffe7961153219be10786da436> /System/Library/Frameworks/Security.framework/Versions/A/Security 0x92987000 - 0x929a7ff2 libGL.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x929a8000 - 0x92a05ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib 0x92a1e000 - 0x92a1effb com.apple.installserver.framework 1.0 (8) /System/Library/PrivateFrameworks?/InstallServer?.framework/Versions/A/InstallServer? 0x92a1f000 - 0x92ae6ff2 com.apple.vImage 3.0 (3.0) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x92ae7000 - 0x92b12fe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib 0x92b13000 - 0x92b14ffc libffi.dylib ??? (???) <a3b573eb950ca583290f7b2b4c486d09> /usr/lib/libffi.dylib 0x92b15000 - 0x92b19fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib 0x92b1a000 - 0x92b97fef libvMisc.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92b98000 - 0x92c79ff7 libxml2.2.dylib ??? (???) <3cd4cccd4ca35dffa4688436aa0cd908> /usr/lib/libxml2.2.dylib 0x92c7a000 - 0x92c83fff com.apple.speech.recognition.framework 3.7.24 (3.7.24) <d3180f9edbd9a5e6f283d6156aa3c602> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition?.framework/Versions/A/SpeechRecognition? 0x92cbb000 - 0x92cbbffa com.apple.CoreServices? 32 (32) <2fcc8f3bd5bbfc000b476cad8e6a3dd2> /System/Library/Frameworks/CoreServices?.framework/Versions/A/CoreServices? 0x92d2c000 - 0x92d2cffd com.apple.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib 0x92d2d000 - 0x92e8cff3 libSystem.B.dylib ??? (???) <4899376234e55593b22fc370935f8cdf> /usr/lib/libSystem.B.dylib 0x92e8d000 - 0x92e94ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib 0x92e95000 - 0x92eeeff7 libGLU.dylib ??? (???) /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92f40000 - 0x92f5bffb libPng.dylib ??? (???) <b6abcac36ec7654ff3e1cfa786b0117b> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x92f5c000 - 0x92f72fff com.apple.DictionaryServices? 1.0.0 (1.0.0) <ad0aa0252e3323d182e17f50defe56fc> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/DictionaryServices?.framework/Versions/A/DictionaryServices? 0x92f73000 - 0x92f9bfff libcups.2.dylib ??? (???) <2f0a710a9128882efb2ed92ad139b58c> /usr/lib/libcups.2.dylib 0x92f9c000 - 0x92fa0fff libGIF.dylib ??? (???) <d4234e6f5e5f530bdafb969157f1f17b> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x93007000 - 0x93007ff8 com.apple.ApplicationServices? 34 (34) <8f910fa65f01d401ad8d04cc933cf887> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/ApplicationServices? 0x93008000 - 0x9300fff7 libCGATS.A.dylib ??? (???) <9b29a5500efe01cc3adea67bbc42568e> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/CoreGraphics?.framework/Versions/A/Resources/libCGATS.A.dylib 0x93016000 - 0x9309ffe3 com.apple.DesktopServices? 1.4.5 (1.4.5) <8b264cd6abbbd750928c637e1247269d> /System/Library/PrivateFrameworks?/DesktopServicesPriv?.framework/Versions/A/DesktopServicesPriv? 0x930a0000 - 0x9345efea libLAPACK.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x934b6000 - 0x934bcfff com.apple.print.framework.Print 218.0.2 (220.1) <8bf7ef71216376d12fcd5ec17e43742c> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x937fa000 - 0x93838ff7 libGLImage.dylib ??? (???) <090de775838db03ddc710f57abbf6218> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x93856000 - 0x9387afeb libssl.0.9.7.dylib ??? (???) <acee7fc534674498dcac211318aa23e8> /usr/lib/libssl.0.9.7.dylib 0x9387b000 - 0x9387bff8 com.apple.Cocoa 6.5 (???) <e064f94d969ce25cb7de3cfb980c3249> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x9387c000 - 0x939a0fe3 com.apple.audio.toolbox.AudioToolbox? 1.5.1 (1.5.1) /System/Library/Frameworks/AudioToolbox?.framework/Versions/A/AudioToolbox? 0x939a1000 - 0x9419efef com.apple.AppKit? 6.5.2 (949.26) <bc4593edd8a224409fb6953a354505a0> /System/Library/Frameworks/AppKit?.framework/Versions/C/AppKit? 0x9419f000 - 0x941abfe7 com.apple.opengl 1.5.6 (1.5.6) <d599b1bb0f8a8da6fd125e2587b27776> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x941ac000 - 0x945bcfef libBLAS.dylib ??? (???) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x94d10000 - 0x94d10fff com.apple.Carbon 136 (136) <98a5e3bc0c4fa44bbb09713bb88707fe> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x94d11000 - 0x94d27fe7 com.apple.CoreVideo? 1.5.0 (1.5.0) <7e010557527a0e6d49147c297d16850a> /System/Library/Frameworks/CoreVideo?.framework/Versions/A/CoreVideo? 0x94d28000 - 0x94df3fff com.apple.ColorSync? 4.5.0 (4.5.0) /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ColorSync?.framework/Versions/A/ColorSync? 0x95d9a000 - 0x95e19ff5 com.apple.SearchKit? 1.2.0 (1.2.0) <277b460da86bc222785159fe77e2e2ed> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/SearchKit?.framework/Versions/A/SearchKit? 0x95ee2000 - 0x9657bfff com.apple.CoreGraphics? 1.351.21 (???) <6c93fd21149f389129fe47fa6ef71880> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/CoreGraphics?.framework/Versions/A/CoreGraphics? 0x9659d000 - 0x9659dffd com.apple.Accelerate.vecLib 3.4.2 (vecLib 3.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x9659e000 - 0x9664efff edu.mit.Kerberos 6.0.12 (6.0.12) <3dd13466876a8fe4549cfc1354233ec3> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos 0x9664f000 - 0x966dbff7 com.apple.LaunchServices? 286.5 (286.5) <33c3ae54abb276b61a99d4c764d883e2> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/LaunchServices?.framework/Versions/A/LaunchServices? 0x966dc000 - 0x9671bfef libTIFF.dylib ??? (???) <6d0f80e9d4d81f3f64c876aca005bd53> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x9689c000 - 0x96981ff3 com.apple.CoreData? 100.1 (186) <8e28162ef2288692615b52acc01f8b54> /System/Library/Frameworks/CoreData?.framework/Versions/A/CoreData? 0x969c0000 - 0x96a53fff com.apple.ink.framework 101.3 (86) <bf3fa8927b4b8baae92381a976fd2079> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x96ab0000 - 0x96d2afe7 com.apple.Foundation 6.5.4 (677.15) <6216196287f98a65ddb654d04d773e7b> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x96d2b000 - 0x96da2fe3 com.apple.CFNetwork 221.5 (221.5) <5474cdd7d2a8b2e8059de249c702df9e> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x96da3000 - 0x96dd2fe3 com.apple.AE 402.2 (402.2) <e01596187e91af5d48653920017b8c8e> /System/Library/Frameworks/CoreServices?.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x96dd3000 - 0x96dd5fff com.apple.securityhi 3.0 (30817) <2b2854123fed609d1820d2779e2e0963> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x96f92000 - 0x96fecff7 com.apple.CoreText? 2.0.1 (???) <07494945ad1e3f5395599f42748457cc> /System/Library/Frameworks/ApplicationServices?.framework/Versions/A/Frameworks/CoreText?.framework/Versions/A/CoreText? 0x96fed000 - 0x97001ff3 com.apple.ImageCapture? 4.0 (5.0.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture?.framework/Versions/A/ImageCapture? 0x9702d000 - 0x9702dffd com.apple.Accelerate 1.4.2 (Accelerate 1.4.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0xba900000 - 0xba916fff libJapaneseConverter.dylib ??? (???) <7b0248c392848338f5d6ed093313eeef> /System/Library/CoreServices?/Encodings/libJapaneseConverter.dylib 0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib 0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

Just tried to jailbreak my cleanly restored 1.1.4 phone, independence crashed, won't reopen. :( And my phone is stuck in restore mode.

First off.. I stole this from the issues page because I tried here for this solution for way to long.... If you get Main script execution failed errors after chmoding to 777 in 1.1.4 then run the command below and it gives installer.app root privledges...

SNIP---------> This has nothing to do with iNdependance - Firmware 1.1.3 runs everything as user 'mobile' and not 'root'. Installer 3.0 expects to run as root and can't execute. You can give Installer.app root exec priveledges with this command from the ssh login:

chmod ug+s /Applications/Installer.app/Installer

It looks like taberb's issue is the same issue I am seeing.

I had to reformat and reinstall my box for an unrelated reason (I fucked up some things in /System). I've applied all updates, have installed iLife '08 and iWork '08, then the SDK, and I'm getting the same crash as above.

Hmm, taberb, out of curiosity, do you have the SDK installed? I wonder if having the SDK installed is causing this. Hmm...

AHA!

So I used GDB and debugged this:

#0 0x3c3a71d7 in ?? () #1 0x0002295f in PhoneInteraction?::exitRecoveryMode ()

The sendCommandToDevice function is what causes the crash. Hmm, I've got the SDK. You know, I wonder if the SDK uses a different MobileDevice?...

So, I downloaded the 7.6.1 DMG.

7.6.1 MobileDevice?: 5355acc34b26edd3afdad5d7eff479c0 SDK MobileDevice?: d04f46b61cf140149570d8e6828e5cb2

So, that explains it. I replaced my MobileDevice? with the 7.6.1 MobileDevice? (and backed up the SDK's MobileDevice?). It works. Now to find the address of the sendCommandToDevice function in the SDK's MobileDevice?. /me opens IDA

Attempting to Jailbreak, I have the issue for which there is an incomplete or non-functional attempt on this page to address. iNfo reports iTunes 7.6.1 , Prod ver. 1.1.4 , Firmware iBoot-204.3.14 , Build 4A102, Active state Activated.

I use top and ps-ax to verify that iTunes Helper is not running or I kill {PID} and verify it's gone.

This AM. When performing the Manual download work around, I received a folder and placed that folder in the specific directory. Where I also noticed other such files reside - a folder titled firmware_112 (with nothing in it) and two Restore.ipsw files. One says it is dated "yesterday" called iPhone1,1_1.1.2_3B48b_Restore.ipsw Size 51.2 MB and the other dated 3/17 titled iPhone1,1_1.1.4_4A102_Restore.ipsw Size 162.1 MB

After downloading from the link manually and placing the folder received in this same location where I see these files --- HOME/Library/iTunes/iPhone Software Updates/ (where HOME is your user folder in Finder) --- the results of an attempt to Jailbreak are the same.

Did I need to Deactivate the phone first? Or unlock it to Jailbreak? I have read ever word of the iNdependence Help....and anything else I can find online

"Could not extract firmware file contents" Looking forward to getting this functional... coolsoftware :-)

Youtube doesn't work after unlock with ATT sim card, anybody had the same???

I have tested both the current version (no problems what so ever) and the beta 5 version, which seemed to hang during the jailbreak. I killed the app and restarted, worked flawlessly second time. Awesome package, thank you

Downloading the firmware will fail unless you have this directory:

~/Library/iTunes/iPhone Software Updates

(beware the spaces)

To make this directory if you do not have it, issue this command in a terminal window:

mkdir ~/Library/iTunes/iPhone\ Software\ Updates

Hi, does anyone have a fix for the MobileDevice? Crash? I have the sdk but i don't realy intend to use it, can i just ditch that one?

To answer my own question, i got the latest iTunes.dmg (7.6.2) and dug into the pkg's to the mobile device one, installed that and everything was happynormalgoodfun :)

Is there anything i need to do in order for iNdependence to work with iTunes 7.6.2?

Yes. I am wondering also how to get iNdependence working with the latest version of iTunes and get installer.app on it.

Any solutions here or to my email (zarxman@gmail.com) are great! Thanks!

@everyone: Just released a version which works with iTunes 7.6.2. Also, it will fix the missing iPhone software updates directory problem.

@imacujo: I've found private functions in the SDK version of MobileDevice? which look a lot like the ones in iTunes. However, they don't work quite the same way anymore. I'm currently looking into this.

@dial.operator... thank you so much, appreciate it :)

Hey guys, I'm having a Major Issue with my Iphone, I upgraded it from V1.1.2 to V1.1.3 through the Installer, but I've been wanting to downgrade back to V1.1.1 state, I've followed instructions, putting it in recovery mode then restoring it, having selected V1.1.1_restore.ipsw, Itunes gives me an error, thats normal, I quit Itunes, get rid of Itunes Helper, launch Independence, but it doesn't pick up any Iphone connection, and the thing that bothers me most is that my Iphone then leaves recovery mode to come into a working V1.1.3 Iphone..

The Installer.app workaround doesn't work as of May 28, 2008 as the download link is broken. I found a different download link but the permissions were all awry, and without an automatically installed BSD subsystem fixing it was a huge pain in the ass. A much easier solution that currently works out of the box for both OS X and Windows users is iDemocracy. I make no claim to whether they respect the GPL, but I do know their software is free as in beer and works, unlike iNdependence, sadly.

http://code.google.com/p/idemocracy/downloads/list

@dial.operator... Is there any way you can get iNdependence to work with iTunes 7.7, like you did for 7.6.2? Looking forward to great news :)

I upgraded to iphone 2.0 firmware but need to get it back to 1.1.4 because I'm in Canada and can't seem to get it to work with 2.0. I have everything back to 1.1.4 except the baseband is still at the 2.0 version of 04.05.04_G instead of 1.1.4's baseband of 04.04.05_G. Is there any tool out there that would allow me to get the baseband back so that I can do the sim unlock again and get the blasted phone part to work again?

@je..

Go here http://sleepers.net/news/?page_id=216

@dial.operator... Is there any way you can get iNdependence to work with iTunes 7.7. The easy of installing Open SSH with 3 restarts... I miss that... Looking forward to great news :D

I have a Probleem with my ipod touch 1.1.2 i already made it to 1.1.1 firmwire but i dont know how to change theme are download application on it btw www.jailbreakme.com dont work no more anyone can help i'll be waiting for answer thnx