gmlive - Project Hosting on Google Code

Last 30 days Dec 06, 2009 issue 41 (GMLIVE出现两个问题，不知是否是安装错误？或者软件本身bug？) commented on by flyjackey767 - 好像gmlive好久没更新了。。。，不知道这个项目还有在继续吗好像gmlive好久没更新了。。。，不知道这个项目还有在继续吗 Nov 28, 2009 issue 41 (GMLIVE出现两个问题，不知是否是安装错误？或者软件本身bug？) commented on by ngn...@gmail.com - 还有个问题, sopcast频道列表有乱码. 还有个问题, sopcast频道列表有乱码. Nov 28, 2009 issue 41 (GMLIVE出现两个问题，不知是否是安装错误？或者软件本身bug？) commented on by ngn...@gmail.com - 我这儿也有这两个bug... pplive好像不能用了. 我这儿也有这两个bug... pplive好像不能用了. Nov 27, 2009 issue 42 (gmlive-extra与libppswrapper冲突) reported by coder...@gmail.com - 编译其中ppstream部分后，生成以下文件与libppswrapper冲突。 /usr/lib/libppswrapper-preload.so -> libppswrapper-preload.so.0 /usr/lib/libppswrapper-preload.so.0 -> libppswrapper-preload.so.0.0 /usr/lib/libppswrapper-preload.so.0.0 -> libppswrapper-preload.so.0.0.0 /usr/lib/libppswrapper-preload.so.0.0.0 这些库是做什么用的？编译其中ppstream部分后，生成以下文件与libppswrapper冲突。 /usr/lib/libppswrapper-preload.so -> libppswrapper-preload.so.0 /usr/lib/libppswrapper-preload.so.0 -> libppswrapper-preload.so.0.0 /usr/lib/libppswrapper-preload.so.0.0 -> libppswrapper-preload.so.0.0.0 /usr/lib/libppswrapper-preload.so.0.0.0 这些库是做什么用的？ Earlier this year Nov 15, 2009 issue 41 (GMLIVE出现两个问题，不知是否是安装错误？或者软件本身bug？) reported by flyjackey767 - 1、打开gmlive显示打开列表文件错误，sopcast可以正常播放，其他都不行 2、鼠标定位不能正常定位，就是没办法点击到三角形展开目录 1、打开gmlive显示打开列表文件错误，sopcast可以正常播放，其他都不行 2、鼠标定位不能正常定位，就是没办法点击到三角形展开目录 Nov 09, 2009 issue 40 (highlighted pps channel group shall be prioritized in freshi...) commented on by yorkdy - 帮顶，确实是个问题，太慢了，请开发者有时间的话考虑一下，谢谢。帮顶，确实是个问题，太慢了，请开发者有时间的话考虑一下，谢谢。 Nov 06, 2009 issue 40 (highlighted pps channel group shall be prioritized in freshi...) reported by chineseliupeng - 如题，否则排列在后面的频道组要等很久才能被读出来。所以，请让频道刷新更人性化。谢谢！ Currently pps channel groups are read in the order defined in XML file. But this causes long latency before channel groups at the bottom of XML file are read. Please make the channel refreshing work in a more user-friendly way. Thanks! 如题，否则排列在后面的频道组要等很久才能被读出来。所以，请让频道刷新更人性化。谢谢！ Currently pps channel groups are read in the order defined in XML file. But this causes long latency before channel groups at the bottom of XML file are read. Please make the channel refreshing work in a more user-friendly way. Thanks! Oct 26, 2009 issue 20 (最近使用gmlive的一些反馈) commented on by lerosua - @opuspace 那你只需要使用非嵌入模式就可以了 ... @opuspace 那你只需要使用非嵌入模式就可以了 ... Oct 26, 2009 issue 20 (最近使用gmlive的一些反馈) commented on by opuspace - 把mplayer独立出来吧，这样纵横比不会乱变，也可以使用mplayer更多的控制选项。把mplayer独立出来吧，这样纵横比不会乱变，也可以使用mplayer更多的控制选项。 Oct 26, 2009 issue 39 (没有快进快退键) reported by opuspace - 我不知道pps和pplive是否支持，不过有时我一个电影看了一半，下次想从上次看到的地方继续。我不知道pps和pplive是否支持，不过有时我一个电影看了一半，下次想从上次看到的地方继续。 Oct 12, 2009 issue 38 (debian5.0.3 stable版编译安装gmlive的问题) commented on by wpahipc - 根据LinuxSir.Org论坛中leros_H网友给我的解答，原因是gtk+版本过低，下载了gmlive-gloose 版本编译，便可安装成功，在次感谢! 根据LinuxSir.Org论坛中leros_H网友给我的解答，原因是gtk+版本过低，下载了gmlive-gloose 版本编译，便可安装成功，在次感谢! Oct 10, 2009 issue 38 (debian5.0.3 stable版编译安装gmlive的问题) reported by wpahipc - 以下是我./configure的过程 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether NLS is requested... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for intltool >= 0.35.0... 0.40.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.10.0 checking for XML::Parser... ok checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking how to run the C++ preprocessor... g++ -E checking for socket... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for PACKAGE... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating data/gmlive.desktop.in config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands 以下是make的过程 make all-recursive make[1]: Entering directory `/home/wpah/Program/gmlive-0.22.2' Making all in src make[2]: Entering directory `/home/wpah/Program/gmlive-0.22.2/src' g++ -DHAVE_CONFIG_H -I. -I.. -I.. -I. -DDATA_DIR=\""/usr/local/share/gmlive"\" -DGMLIVE_LOCALEDIR=\""/usr/local/share/locale"\" -D_REENTRANT -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/cairomm-1.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/atk-1.0 -I/usr/include/libxml2 -g -O2 -MT MainWindow.o -MD -MP -MF .deps/MainWindow.Tpo -c -o MainWindow.o MainWindow.cpp MainWindow.cpp: In member function ‘void MainWindow::on_menu_help_about()’: MainWindow.cpp:685: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [12])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) MainWindow.cpp: In constructor ‘MainWindow::MainWindow()’: MainWindow.cpp:820: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [10])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) make[2]: * [MainWindow.o] 错误 1 make[2]: Leaving directory `/home/wpah/Program/gmlive-0.22.2/src' make[1]: * [all-recursive] 错误 1 make[1]: Leaving directory `/home/wpah/Program/gmlive-0.22.2' make: * [all] 错误 2 请问如何解决??? 以下是我./configure的过程 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether NLS is requested... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for intltool >= 0.35.0... 0.40.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.10.0 checking for XML::Parser... ok checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking how to run the C++ preprocessor... g++ -E checking for socket... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for PACKAGE... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating data/gmlive.desktop.in config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands 以下是make的过程 make all-recursive make[1]: Entering directory `/home/wpah/Program/gmlive-0.22.2' Making all in src make[2]: Entering directory `/home/wpah/Program/gmlive-0.22.2/src' g++ -DHAVE_CONFIG_H -I. -I.. -I.. -I. -DDATA_DIR=\""/usr/local/share/gmlive"\" -DGMLIVE_LOCALEDIR=\""/usr/local/share/locale"\" -D_REENTRANT -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/cairomm-1.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/atk-1.0 -I/usr/include/libxml2 -g -O2 -MT MainWindow.o -MD -MP -MF .deps/MainWindow.Tpo -c -o MainWindow.o MainWindow.cpp MainWindow.cpp: In member function ‘void MainWindow::on_menu_help_about()’: MainWindow.cpp:685: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [12])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) MainWindow.cpp: In constructor ‘MainWindow::MainWindow()’: MainWindow.cpp:820: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [10])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) make[2]: * [MainWindow.o] 错误 1 make[2]: Leaving directory `/home/wpah/Program/gmlive-0.22.2/src' make[1]: * [all-recursive] 错误 1 make[1]: Leaving directory `/home/wpah/Program/gmlive-0.22.2' make: * [all] 错误 2 请问如何解决??? Oct 03, 2009 issue 37 (关于gmlive中pps的问题) commented on by CyrusYz...@gmail.com - 非root用户启动非root用户启动 Oct 03, 2009 issue 37 (关于gmlive中pps的问题) commented on by CyrusYz...@gmail.com - 名称 : gmlive 架构 : i586 版本 : 0.22.2 发行 : 1.fc11 大小 : 628 k Repo : installed 语法 : A UI for mplayer help for playing live video 统一资源定位符: http://gmlive.googlecode.com 许可证 : GPLv2 升级 : Live video for linux, maybe it is a UI for mplayer by playing : live video. It support sopcast ,nslive and mms stream medias. 名称 : gmlive-extra 架构 : i586 版本 : 0.3 发行 : 3.fc11 大小 : 3.2 M Repo : installed 语法 : A UI for mplayer help for playing live video 统一资源定位符: http://gmlive.googlecode.com 许可证 : GPLv2 升级 : extra for gmlive ,contains xpplive and sopcast engine. 名称 : gmlive 架构 : i586 版本 : 0.22.2 发行 : 1.fc11 大小 : 628 k Repo : installed 语法 : A UI for mplayer help for playing live video 统一资源定位符: http://gmlive.googlecode.com 许可证 : GPLv2 升级 : Live video for linux, maybe it is a UI for mplayer by playing : live video. It support sopcast ,nslive and mms stream medias. 名称 : gmlive-extra 架构 : i586 版本 : 0.3 发行 : 3.fc11 大小 : 3.2 M Repo : installed 语法 : A UI for mplayer help for playing live video 统一资源定位符: http://gmlive.googlecode.com 许可证 : GPLv2 升级 : extra for gmlive ,contains xpplive and sopcast engine. Oct 03, 2009 issue 37 (关于gmlive中pps的问题) commented on by CyrusYz...@gmail.com - Linux hmh-loptop 2.6.30.8-64.fc11.i686.PAE #1 SMP Fri Sep 25 04:56:58 EDT 2009 i686 i686 i386 GNU/Linux Linux hmh-loptop 2.6.30.8-64.fc11.i686.PAE #1 SMP Fri Sep 25 04:56:58 EDT 2009 i686 i686 i386 GNU/Linux Oct 03, 2009 issue 33 (debian lenny下编译失败) commented on by CyrusYz...@gmail.com - 好像要装类似fedora中的gtkmm-devel 好像要装类似fedora中的gtkmm-devel Oct 03, 2009 issue 37 (关于gmlive中pps的问题) reported by CyrusYz...@gmail.com - 当gmlive关闭(或无故关闭，产生bug报告)后，不能再启动gmlive 1. 需要通过top中等5到10分钟，看到xpps，kill 掉后，才能启动gmlive 2.终端的提示 gmlive there has another gmlive running 3.当能播放出现的 [pps_callback]: buffing done. [ppsvod_play_item]-----------end ------Start to play... ------[index 1]:Filelen:137869401,Downspeed:89088 B/s, Upspeed:1706 B/s,PeerCoungmplayer.cpp\|start_play\|249\| 79693289 mplayer -slave -quiet -cache 256 -nomouseinput -noconsolecontrols -wid 79693289 /tmp/file.out ------[index 1]:Filelen:137869401,Downspeed:8908mplayer: could not connect to socketProgress:0% mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Something went wrong, no index chunk found on given address (137839213) ------[index 1]:Error loading dll,Downspeed:89088 B/s, Upspeed:1706 B/s,PeerCount:4,Progress:0% ERROR: Could not open required DirectShow codec drvc.dll. [pulse] working around probably broken pause functionality, see http://www.pulseaudio.org/ticket/440 MainWindow.cpp\|get_video_resolution\|159\| w = 512, h = 384 Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:137869401,Downspeed:92023 B/s, Upspeed:2321 B/s,PeerCounSelected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:137869401,Downspeed:9202Selected font is not scalable. Using ppem=15.0% FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:303004386,DownspeSelected font is not scalable. Using ppem=15.rogress:0% FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. MainWindow.cpp\|on_menu_quit\|545\| on_menu_quitpps exit 4.建议提升pps列表的下载速度或加入axel 当gmlive关闭(或无故关闭，产生bug报告)后，不能再启动gmlive 1. 需要通过top中等5到10分钟，看到xpps，kill 掉后，才能启动gmlive 2.终端的提示 gmlive there has another gmlive running 3.当能播放出现的 [pps_callback]: buffing done. [ppsvod_play_item]-----------end ------Start to play... ------[index 1]:Filelen:137869401,Downspeed:89088 B/s, Upspeed:1706 B/s,PeerCoungmplayer.cpp\|start_play\|249\| 79693289 mplayer -slave -quiet -cache 256 -nomouseinput -noconsolecontrols -wid 79693289 /tmp/file.out ------[index 1]:Filelen:137869401,Downspeed:8908mplayer: could not connect to socketProgress:0% mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Something went wrong, no index chunk found on given address (137839213) ------[index 1]:Error loading dll,Downspeed:89088 B/s, Upspeed:1706 B/s,PeerCount:4,Progress:0% ERROR: Could not open required DirectShow codec drvc.dll. [pulse] working around probably broken pause functionality, see http://www.pulseaudio.org/ticket/440 MainWindow.cpp\|get_video_resolution\|159\| w = 512, h = 384 Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:137869401,Downspeed:92023 B/s, Upspeed:2321 B/s,PeerCounSelected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:137869401,Downspeed:9202Selected font is not scalable. Using ppem=15.0% FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. Selected font is not scalable. Using ppem=15. FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. ------[index 1]:Filelen:303004386,DownspeSelected font is not scalable. Using ppem=15.rogress:0% FT_Set_Pixel_Sizes failed. Wrong bounding box, width <= 0 ! Cannot prepare subtitle font. MainWindow.cpp\|on_menu_quit\|545\| on_menu_quitpps exit 4.建议提升pps列表的下载速度或加入axel Sep 30, 2009 r338 (fix toolbox hide bug) committed by lerosua - fix toolbox hide bug fix toolbox hide bug Sep 30, 2009 r337 (change version) committed by lerosua - change version change version Sep 30, 2009 r336 (fix po) committed by lerosua - fix po fix po Sep 26, 2009 issue 31 (make 通不过？缺少头文件) Status changed by lerosua - 低版本的安装gloose版本试试。 Status: Fixed 低版本的安装gloose版本试试。 Status: Fixed Sep 26, 2009 issue 34 (0.22.1 compile failed) changed by lerosua - gtk+版本太低。可以安装相应gloose版本来降低gtk+版本要求。 Status: Fixed Owner: lerosua gtk+版本太低。可以安装相应gloose版本来降低gtk+版本要求。 Status: Fixed Owner: lerosua Sep 23, 2009 gmlive-0.22.2-gloose.tar.bz2 (gmlive 0.22.2-gloose) file uploaded by lerosua - Labels: OpSys-Linux Labels: OpSys-Linux Sep 23, 2009 gmlive-extra-0.3.tar.gz (gmlive extra files) file uploaded by lerosua - Labels: Featured Type-Installer Labels: Featured Type-Installer Sep 23, 2009 gmlive-0.22.2.tar.bz2 (gmlive 0.22.2) file uploaded by lerosua - Labels: Featured Type-Source Labels: Featured Type-Source Sep 21, 2009 r335 (fix delay time) committed by lerosua - fix delay time fix delay time Sep 21, 2009 r334 (fix) committed by lerosua - fix fix Sep 21, 2009 r333 (just fix sopcast play) committed by lerosua - just fix sopcast play just fix sopcast play Sep 19, 2009 r332 (添加整组进书签功能) committed by lerosua - 添加整组进书签功能添加整组进书签功能 Sep 18, 2009 r331 (fix record) committed by lerosua - fix record fix record Sep 17, 2009 r330 (fix boomark of stream tram blank) committed by lerosua - fix boomark of stream tram blank fix boomark of stream tram blank Sep 17, 2009 r329 (fix recent stream) committed by lerosua - fix recent stream fix recent stream Sep 17, 2009 r328 (test) committed by lerosua - test test Sep 14, 2009 issue 36 ((sometimes)频道列表更新未结束前关闭gmlive，wget未终止) reported by Alvin.rxg - What steps will reproduce the problem? 1. 频道列表未更新完毕时，关闭gmlive wget进程未被终止。 2. 再次启动gmlive，提示gmlive已经启动(检测wget？？？)。 3. 关闭wget后正常。 What is the expected output? What do you see instead? 有时发生。 What version of the product are you using? On what operating system? gmlive 0.22.1 extra 0.2 uname -a Linux arch 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-58 AuthenticAMD GNU/Linux Please provide any additional information below. What steps will reproduce the problem? 1. 频道列表未更新完毕时，关闭gmlive wget进程未被终止。 2. 再次启动gmlive，提示gmlive已经启动(检测wget？？？)。 3. 关闭wget后正常。 What is the expected output? What do you see instead? 有时发生。 What version of the product are you using? On what operating system? gmlive 0.22.1 extra 0.2 uname -a Linux arch 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-58 AuthenticAMD GNU/Linux Please provide any additional information below. Sep 14, 2009 issue 35 (退出程序是保存频道列表) reported by Alvin.rxg - What steps will reproduce the problem? 1. 程序退出时，没有保存频道列表 2. 3. What is the expected output? What do you see instead? 退出程序是保存频道列表。下次启动程序时，在更新频道列表的同时，可以同时使用之前的频道列表，如果相应的节目仍然有效，则直接观看里边的节目。 What version of the product are you using? On what operating system? gmlive 0.22.1 extra 0.2 Please provide any additional information below. 希望能增加频道更新的进度提示。就像windows平台的pps那样。 What steps will reproduce the problem? 1. 程序退出时，没有保存频道列表 2. 3. What is the expected output? What do you see instead? 退出程序是保存频道列表。下次启动程序时，在更新频道列表的同时，可以同时使用之前的频道列表，如果相应的节目仍然有效，则直接观看里边的节目。 What version of the product are you using? On what operating system? gmlive 0.22.1 extra 0.2 Please provide any additional information below. 希望能增加频道更新的进度提示。就像windows平台的pps那样。 Sep 13, 2009 r327 (test xpps play /tmp/file.out) committed by lerosua - test xpps play /tmp/file.out test xpps play /tmp/file.out Sep 08, 2009 r326 ([No log message]) committed by xihels - [No log message] [No log message] Sep 08, 2009 r325 ([No log message]) committed by xihels - [No log message] [No log message] Sep 08, 2009 r324 (关掉xpps) committed by xihels - 关掉xpps 关掉xpps Sep 07, 2009 r323 (fix xpps something) committed by lerosua - fix xpps something fix xpps something Sep 07, 2009 issue 26 (ubuntu8.10全屏gmlive多次后无法修改大小。) commented on by Calvin.Ngei - 是的，這是一個非常明顯的bug，全屏之後有時不能恢復原來的大小。拉大屏幕之後不能恢復原來大小。我的是 ubuntu 9.04，gmlive-0.22.1，自己編譯。是的，這是一個非常明顯的bug，全屏之後有時不能恢復原來的大小。拉大屏幕之後不能恢復原來大小。我的是 ubuntu 9.04，gmlive-0.22.1，自己編譯。 Sep 07, 2009 r322 (just test git ci) committed by lerosua - just test git ci just test git ci Sep 07, 2009 r321 (2009-09-07 yetist <yetist@gmail.com> * configure.in:...) committed by yetist - 2009-09-07 yetist <yetist@gmail.com> * configure.in: * Makefile.am: * INSTALL: 不小心把它给更新了... 移除 totem-plugin 的支持。 2009-09-07 yetist <yetist@gmail.com> * configure.in: * Makefile.am: * INSTALL: 不小心把它给更新了... 移除 totem-plugin 的支持。 Sep 06, 2009 r320 (add open_url for sop:// and pps://) committed by lerosua - add open_url for sop:// and pps:// add open_url for sop:// and pps:// Sep 04, 2009 r319 ([No log message]) committed by xihels - [No log message] [No log message] Sep 04, 2009 issue 34 (0.22.1 compile failed) commented on by springrider - +1 It's a problem of gtkmm, but they've fixed it at 09-03-20, I'm using ubuntu 8.10 and libgtkmm-2.4, seems is the latest version, but still got the problem. I tried changing the args: Gtk::Builder::create_from_file(const std::string&, const Glib::ustring&) to Gtk::Builder::create_from_file(const std::string&, const char* object_id) then it could compile. Of course, I got a linking error later... +1 It's a problem of gtkmm, but they've fixed it at 09-03-20, I'm using ubuntu 8.10 and libgtkmm-2.4, seems is the latest version, but still got the problem. I tried changing the args: Gtk::Builder::create_from_file(const std::string&, const Glib::ustring&) to Gtk::Builder::create_from_file(const std::string&, const char* object_id) then it could compile. Of course, I got a linking error later... Sep 04, 2009 r318 (fix) committed by lerosua - fix fix Sep 04, 2009 issue 29 (让配置文件存放符合XDG标准) Status changed by lerosua - svn 317 已将目录转至~/.config中。用的是glibmm的get_user_config_dir() Status: Fixed svn 317 已将目录转至~/.config中。用的是glibmm的get_user_config_dir() Status: Fixed Sep 04, 2009 r317 (转移配置目录到~/.config中) committed by lerosua - 转移配置目录到~/.config中转移配置目录到~/.config中 Sep 01, 2009 issue 33 (debian lenny下编译失败) commented on by qinyong.liu - 我的GTK版本肯定没问题。都是用git弄的最新的。我的GTK版本肯定没问题。都是用git弄的最新的。

issue 38 (debian5.0.3 stable版编译安装gmlive的问题) reported by wpahipc - 以下是我./configure的过程 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether NLS is requested... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for intltool >= 0.35.0... 0.40.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.10.0 checking for XML::Parser... ok checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking how to run the C++ preprocessor... g++ -E checking for socket... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for PACKAGE... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating data/gmlive.desktop.in config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands 以下是make的过程 make all-recursive make[1]: Entering directory `/home/wpah/Program/gmlive-0.22.2' Making all in src make[2]: Entering directory `/home/wpah/Program/gmlive-0.22.2/src' g++ -DHAVE_CONFIG_H -I. -I.. -I.. -I. -DDATA_DIR=\""/usr/local/share/gmlive"\" -DGMLIVE_LOCALEDIR=\""/usr/local/share/locale"\" -D_REENTRANT -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/cairomm-1.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/atk-1.0 -I/usr/include/libxml2 -g -O2 -MT MainWindow.o -MD -MP -MF .deps/MainWindow.Tpo -c -o MainWindow.o MainWindow.cpp MainWindow.cpp: In member function ‘void MainWindow::on_menu_help_about()’: MainWindow.cpp:685: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [12])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) MainWindow.cpp: In constructor ‘MainWindow::MainWindow()’: MainWindow.cpp:820: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [10])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) make[2]: *** [MainWindow.o] 错误 1 make[2]: Leaving directory `/home/wpah/Program/gmlive-0.22.2/src' make[1]: *** [all-recursive] 错误 1 make[1]: Leaving directory `/home/wpah/Program/gmlive-0.22.2' make: *** [all] 错误 2 请问如何解决???

以下是我./configure的过程 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking whether NLS is requested... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for intltool >= 0.35.0... 0.40.0 found checking for intltool-update... /usr/bin/intltool-update checking for intltool-merge... /usr/bin/intltool-merge checking for intltool-extract... /usr/bin/intltool-extract checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for perl... /usr/bin/perl checking for perl >= 5.8.1... 5.10.0 checking for XML::Parser... ok checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking how to run the C++ preprocessor... g++ -E checking for socket... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for PACKAGE... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for LC_MESSAGES... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking for ngettext in libc... yes checking for dgettext in libc... yes checking for bind_textdomain_codeset... yes checking for msgfmt... (cached) /usr/bin/msgfmt checking for dcgettext... yes checking if msgfmt accepts -c... yes checking for gmsgfmt... (cached) /usr/bin/msgfmt checking for xgettext... (cached) /usr/bin/xgettext configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating po/Makefile.in config.status: creating data/gmlive.desktop.in config.status: creating data/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands config.status: executing default-1 commands config.status: executing po/stamp-it commands 以下是make的过程 make all-recursive make[1]: Entering directory `/home/wpah/Program/gmlive-0.22.2' Making all in src make[2]: Entering directory `/home/wpah/Program/gmlive-0.22.2/src' g++ -DHAVE_CONFIG_H -I. -I.. -I.. -I. -DDATA_DIR=\""/usr/local/share/gmlive"\" -DGMLIVE_LOCALEDIR=\""/usr/local/share/locale"\" -D_REENTRANT -I/usr/include/gtkmm-2.4 -I/usr/lib/gtkmm-2.4/include -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6 -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include -I/usr/include/cairomm-1.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/freetype2 -I/usr/include/directfb -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/atk-1.0 -I/usr/include/libxml2 -g -O2 -MT MainWindow.o -MD -MP -MF .deps/MainWindow.Tpo -c -o MainWindow.o MainWindow.cpp MainWindow.cpp: In member function ‘void MainWindow::on_menu_help_about()’: MainWindow.cpp:685: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [12])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) MainWindow.cpp: In constructor ‘MainWindow::MainWindow()’: MainWindow.cpp:820: error: no matching function for call to ‘Gtk::Builder::create_from_file(const char [37], const char [10])’ /usr/include/gtkmm-2.4/gtkmm/builder.h:171: note: candidates are: static Glib::RefPtr<Gtk::Builder> Gtk::Builder::create_from_file(const std::string&) make[2]: *** [MainWindow.o] 错误 1 make[2]: Leaving directory `/home/wpah/Program/gmlive-0.22.2/src' make[1]: *** [all-recursive] 错误 1 make[1]: Leaving directory `/home/wpah/Program/gmlive-0.22.2' make: *** [all] 错误 2 请问如何解决???

Last 30 days

Earlier this year