My favorites | Sign in
Logo
                
New issue | Search
for
| Advanced search | Search tips
List | Grid
   
  ID Type Status Priority Milestone Owner   Summary + Labels ...
  765 Defect OnHold Medium FDS_5.5 tkorhon1   FDS+Evac, Documentation of EVAC_DT_FLOWFIELD vs EVAC_DT_MAX  
  754 Defect OnHold Medium FDS_6.0 tkorhon1   Request for change of EXIT namelist in evac.f90  
  819 Defect Fixed Medium ---- tkorhon1   Ms   Performance  
  806 Defect Fixed Medium ---- tkorhon1   5.3.1 crashes when EVAC included  
  271 Enhancement OnHold Medium FDS_6.0 tkorhon1   Initialisation of evacuation for high density of people   Usability  
  732 Other OnHold Medium ---- tkorhon1   FDS+Evac: Program Exeption - access violation  
  888 Defect MoreInfo Medium ---- shostikk   Problem with wide band model  
  910 Defect Accepted Medium ---- shostikk   Numerical instability with fire and sprinlers  
  901 Defect Accepted High FDS_5.5 shostikk   Negative gas enthalpy in part.f90  
  793 Defect Accepted Medium FDS_5.5 shostikk   Run time decreases as burn pan is moved toward center of room  
  784 Defect Started Medium ---- shostikk   HRR dropping sudenly  
  832 Defect OnHold Medium FDS_5.5 shostikk   burn rate is dropping with radiative fraction 0  
  310 Defect OnHold Medium ---- shostikk   Wrong position of subroutine PARTICLE_MASS_ENERGY_TRANSFER in part.f90   Performance  
  909 Defect MoreInfo Medium ---- randy.mcdermott   Radiative heat flux distribution trend different for different diameter  
  918 Defect Started Medium ---- randy.mcdermott   HRRPUA and FDS6  
  867 Defect Started Medium ---- randy.mcdermott   Atmospheric Wind profile does not develop appropriately  
  856 Defect Started Medium ---- randy.mcdermott   PRESSURE_CORRECTION=TRUE, more odd results  
  847 Defect Started Medium FDS_6.0 randy.mcdermott   Tunnel fire - good results with FDS5, goes unstable if FDS6=TRUE  
  818 Defect OnHold Medium FDS_5.5 randy.mcdermott   parallel tunnel calc gives different results than serial calc  
  704 Defect OnHold Medium FDS_6.0 randy.mcdermott   ALMS (Autonomous Linked Mesh Solver) Development  
  809 Defect Fixed Medium FDS_5.5 randy.mcdermott   Numerical instability with FDS6 = .TRUE.  
  717 Enhancement Accepted Medium FDS_5.5 randy.mcdermott   add cell centered slice to fds2ascii  
  699 Enhancement Accepted Medium FDS_6.0 randy.mcdermott   improve speed of flux limiter scheme  
  730 Enhancement OnHold Medium FDS_6.0 randy.mcdermott   Generalized initial velocity field  
  895 Enhancement Fixed Medium FDS_5.5 randy.mcdermott   drag law for cylinders  
  807 Defect Started High ---- prasad.kuldeep   Overhaul Helium and Hydrogen Validation Cases  
  943 Defect New Medium ---- mcgratta   SPEC ID='WATER VAPOR'  
  942 Defect New Medium ---- mcgratta   Extinction criteria in fire.f90  
  907 Defect MoreInfo Medium ---- mcgratta   Bugs during calculation of vent flow direction  
  941 Defect Accepted Medium ---- mcgratta   Smokeview: Multi Slices soot Velocity  
  939 Defect Accepted Medium ---- mcgratta   Bug with &INIT creating non-physical flow conditions  
  922 Defect Accepted Medium ---- mcgratta   Feature Request for Introducing Particles and Visualization  
  887 Defect Accepted Medium ---- mcgratta   Use ID instead of order number in error messages [Enhancement]  
  837 Defect OnHold Medium ---- mcgratta   Obstruction Surface Temperature  
  827 Defect OnHold Medium ---- mcgratta   Numerical Instability after 542s  
  778 Defect OnHold Medium ---- mcgratta   Activating a "VENT" (porous obst), air-flow breaks down  
  762 Defect OnHold Medium FDS_5.5 mcgratta   FDS part.f90 - Total FRAC is greater than one  
  729 Defect OnHold Medium FDS_5.5 mcgratta   Species vent error  
  498 Defect OnHold Low ---- mcgratta   Rewriting output files from the point of stop  
  116 Defect OnHold Medium ---- mcgratta   Composition of incoming supply "air"   Usability  
  936 Defect Fixed Medium ---- mcgratta   Particles disappear at MESH boundaries  
  904 Defect Fixed Medium ---- mcgratta   Compile error, read.f90  
  899 Defect Fixed Medium ---- mcgratta   XB reordering (low hanging fruit)  
  897 Defect Fixed Medium ---- mcgratta   printout error in User Guide  
  884 Defect Fixed Medium ---- mcgratta   Is QUANTITY='spot obscuration' still effective at FDS 5.4.1 version?  
  863 Defect Fixed Medium ---- mcgratta   Change in PART behavior in FDS 5.4  
  859 Defect Fixed Medium ---- mcgratta   incorrect guide reference to webpage  
  836 Defect Fixed Medium ---- mcgratta   Compile error related to turbulence.mod  
  835 Defect Fixed Medium ---- mcgratta   Energy conservation issue with fds5_linux and fds5_intel_linux_64  
  834 Defect Fixed Medium ---- mcgratta   5.4.0 Slow Down  
  830 Defect Fixed Medium ---- mcgratta   Backing='insulated' in input file conducting to 'exposed in the output file  
  816 Defect Fixed Medium ---- mcgratta   Fan not passing extra species  
  781 Defect Fixed Medium ---- mcgratta   issues of supply and exhaust option  
  779 Defect Fixed Medium ---- mcgratta   THIEF cable failure model  
  764 Defect Fixed Medium ---- mcgratta   Unreasonable pressure down by duct path  
  751 Defect Fixed High ---- mcgratta   droplets not dripping from ceiling  
  744 Defect Fixed Medium ---- mcgratta   Wide band model  
  738 Defect Fixed Medium ---- mcgratta   No record of errors.  
  720 Defect Fixed Medium ---- mcgratta   bulk_density in OBST line  
  697 Defect Fixed Medium ---- mcgratta   Burn out of Fuel when HRRPUA is specified  
  674 Defect Fixed Medium ---- mcgratta   Pressure transfered through a solid wall in one mesh - but not in two  
  653 Defect Fixed Medium ---- mcgratta   DROPLET and PARTICLE_CLASS, TARGETS and POINTERS  
  652 Defect Fixed Medium ---- mcgratta   Relationship between DUCT_PATH and VELocity  
  596 Defect Fixed Medium ---- mcgratta   Unexpected air flow for a jet-fan blowing in the negative X direction   Performance  
  896 Enhancement New Medium FDS_5.5 mcgratta   add MULT to PART  
  858 Enhancement Accepted Medium FDS_6.0 mcgratta   Consilidate main and main_mpi  
  857 Enhancement Accepted Medium FDS_6.0 mcgratta   Consolidate redundant algorithms in part, fire and vege.  
  838 Enhancement OnHold Medium FDS_5.5 mcgratta   Feature Request - Control HRRPUA via DEVC or CTRL  
  641 Enhancement OnHold Medium FDS_6.0 mcgratta   two ghost cells for flux limiter scheme  
  926 Defect Accepted Medium ---- gforney   fds2ascii problem -1D SLICE location  
  911 Defect Accepted Medium ---- gforney   CFAST vents in smokeview  
  726 Defect Accepted Medium ---- gforney   smokezip features request : option to output ini file  
  913 Enhancement Accepted Low ---- gforney   Smokeview Enhancement Requests  
  929 Enhancement Started Low ---- gforney   add PARAMS and NPARAMS keywords to the &DEVICE namelist  
  893 Enhancement OnHold Medium FDS_6.0 gforney   write ascii files from SMV, replaces fds2ascii  
  892 Enhancement OnHold Medium FDS_6.0 gforney   add 'measure of turbulence resolution' to Smokeview  
  773 Enhancement OnHold Low ---- gforney   Plot logarithms of values in Smokeview  
  476 Enhancement Fixed Medium ---- gforney   investigate strategies for visulizing LARGE cases  
  940 Defect New Medium ---- drjfloyd   Changing Heat of Vaporization for water affects Relative Humidity  
  930 Defect MoreInfo Medium ---- drjfloyd   &MISC U0 (Wind)  
  774 Defect MoreInfo Medium ---- drjfloyd   Sudden stop due to lock the hrr file and how to restart  
  519 Defect Started Medium ---- drjfloyd   HRR and CONV_LOSS not matching  
  800 Defect OnHold Medium FDS_5.5 drjfloyd   Different HRR before sprinkler activation  
  672 Defect OnHold Medium FDS_6.0 drjfloyd   Adding OBST then adding HOLE does not work  
  630 Defect OnHold Medium FDS_5.5 drjfloyd   FDS Test Case: water_evaporation not following description in User Guide  
  512 Defect OnHold Medium FDS_6.0 drjfloyd   Problem about POROUS OBST   Usability  
  497 Defect OnHold Medium FDS_6.0 drjfloyd   Control and removing of obstructions   Usability  
  427 Defect OnHold Medium ---- drjfloyd   Problem with function BLACKBODY_FRACTION  
  132 Defect OnHold Low ---- drjfloyd   TRANSPARENCY   Usability  
  53 Defect OnHold Low ---- drjfloyd   Non-physical temperature increases (Divergence equation)   Usability  
  932 Defect Fixed Medium ---- drjfloyd   Compilation Error in dump.f90 for Revision 5092  
  785 Defect Fixed Medium ---- drjfloyd   Using beam detector over multiple meshes  
  919 Enhancement OnHold Medium ---- drjfloyd   modify unit string for DEVC  
  908 Enhancement OnHold Low ---- drjfloyd   User defined, spatially dependent velocity profile at vent inlet??  
  594 Enhancement OnHold Medium ---- drjfloyd   POROUS SURFACES  
  390 Enhancement OnHold Medium ---- drjfloyd   Enhancement: Define Numbers of columns in devc output file  
  166 Enhancement OnHold Low ---- drjfloyd   fds2ascii  
  885 Defect MoreInfo Medium ---- crog...@googlemail.com   Differences in results using the mpi- and openMP-versions  
  876 Defect OnHold Medium ---- crog...@googlemail.com   Simulation runs with serial FDS, crashes OpenMP  
  860 Defect Fixed Medium ---- crog...@googlemail.com   OpenMP version - Problem with REAC line  
CSV
  
Hosted by Google Code