Trainings (Free Training for Students in India.) Wiki page commented on by mohanty.arnav
- Hello Sir,
This is Arnav Mohanty,3rd year Computer Science Student from SRM University.Sir , I would like to know if you are organizing a bboard workshop in the Chennai Region anytime soon.There are many students with me who would want to take part.Whenever you are doing this in Chennai ,Please do let me know.We are looking forward to this.
Thanks
Hello Sir,
This is Arnav Mohanty,3rd year Computer Science Student from SRM University.Sir , I would like to know if you are organizing a bboard workshop in the Chennai Region anytime soon.There are many students with me who would want to take part.Whenever you are doing this in Chennai ,Please do let me know.We are looking forward to this.
Thanks
Dec 27, 2009
Trainings (Free Training for Students in India.) Wiki page commented on by 007coolboyster
- hi
we are organising our nation level fest MANTHAN 10, want to organise bboard workshop. please help me out. shubham, 09983332229, 007coolboyster@gmail.com , www.manthan10.org
hi
we are organising our nation level fest MANTHAN 10, want to organise bboard workshop. please help me out. shubham, 09983332229, 007coolboyster@gmail.com , www.manthan10.org
Dec 26, 2009
BeagleboardRevCValidation (Beagle Board Diagnostic Tools and Procedure) Wiki page commented on by stranger...@netscape.net
- Hi
I have tried the BeagleboardRevCValidation recovery method but my board
just gives "40V" through the serial port. Nothing else. I know the only thing wrong with the board is that I erased all the flash.
Has anybody managed to recover a beagleboard using the BDI2000?
Chris
Hi
I have tried the BeagleboardRevCValidation recovery method but my board
just gives "40V" through the serial port. Nothing else. I know the only thing wrong with the board is that I erased all the flash.
Has anybody managed to recover a beagleboard using the BDI2000?
Chris
Dec 24, 2009
Trainings (Free Training for Students in India.) Wiki page commented on by mehtadushy
- Hi
We at NSIT, Delhi are organizing our annual technical festival INNOVISION from 29th to 31st of January 2010. Would a workshop at our college be feasible at that time. You can be assured of 100+ true enthusiasts turning up for the event.
Dushyant Mehta
dusyant.mehta@ieee.org
Hi
We at NSIT, Delhi are organizing our annual technical festival INNOVISION from 29th to 31st of January 2010. Would a workshop at our college be feasible at that time. You can be assured of 100+ true enthusiasts turning up for the event.
Dushyant Mehta
dusyant.mehta@ieee.org
Dec 19, 2009
BootingBeagleBoard (Procedure to boot Linux on Beagle Board.) Wiki page commented on by c.n.aananth
- I used the files and followed the procedure from http://code.google.com/p/beagleboard/wiki/BeagleboardRevCValidation
I get following messages:
U-Boot 2009.01-dirty (Feb 19 2009 - 12:23:21)
I2C: ready
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 256 MiB
Using default environment
MUSB: using high speed
In: serial usbtty
Out: serial usbtty
Err: serial usbtty
Board revision C
Serial #662c0003000000000403230910011005
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
I also renamed the normal.scr as boot.scr and re-tried, it didn't continue further. Kindly help.
I used the files and followed the procedure from http://code.google.com/p/beagleboard/wiki/BeagleboardRevCValidation
I get following messages:
U-Boot 2009.01-dirty (Feb 19 2009 - 12:23:21)
I2C: ready
OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
DRAM: 256 MB
NAND: 256 MiB
Using default environment
MUSB: using high speed
In: serial usbtty
Out: serial usbtty
Err: serial usbtty
Board revision C
Serial #662c0003000000000403230910011005
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
I also renamed the normal.scr as boot.scr and re-tried, it didn't continue further. Kindly help.
Dec 16, 2009
BeagleboardRevCValidation (Beagle Board Diagnostic Tools and Procedure) Wiki page commented on by sahyagiri
- Hi
I am pretty much stuck to get my usb cam working with beagleboard.
Here is the problem statement.
Aim: To connect a usb camera and make it work in the beagleboard.
Board used: Beagleboard Rev C3.
Addl hardware/sw: Minicom and connectors; powered and normal usb hubs. External 5V power supply. A cheap webcam
Kernel tried: Almost all. Different uboot configurations, different uImages.
I could make the camera working with gspca drivers and only once I could capture images.
Now the board detect the USB Camera/Hub and will give message "device disconnected " after which nothing is getting detected.
But if I power off and connect a netgear usb wlan device; it is getting detected and is working fine.
Currently I am using dump image from Angstrom linux (2GB) which I copied using dd.
Hi
I am pretty much stuck to get my usb cam working with beagleboard.
Here is the problem statement.
Aim: To connect a usb camera and make it work in the beagleboard.
Board used: Beagleboard Rev C3.
Addl hardware/sw: Minicom and connectors; powered and normal usb hubs. External 5V power supply. A cheap webcam
Kernel tried: Almost all. Different uboot configurations, different uImages.
I could make the camera working with gspca drivers and only once I could capture images.
Now the board detect the USB Camera/Hub and will give message "device disconnected " after which nothing is getting detected.
But if I power off and connect a netgear usb wlan device; it is getting detected and is working fine.
Currently I am using dump image from Angstrom linux (2GB) which I copied using dd.
Dec 11, 2009
Trainings (Free Training for Students in India.) Wiki page commented on by vish.sid73
- Sir,
We are organizing a FOSS meet in our college during our annual technical-cultural fest at RGEC, Meerut (around 14 March 2010).
We would like to organize a hands on workshop on beagle board.
Please Reply.
Regards
Siddharth Srivastava
+919235556759
Sir,
We are organizing a FOSS meet in our college during our annual technical-cultural fest at RGEC, Meerut (around 14 March 2010).
We would like to organize a hands on workshop on beagle board.
Please Reply.
Regards
Siddharth Srivastava
+919235556759
Older
Dec 05, 2009
BeagleNANDFlashing (To Flash NAND on BeagleBoard) Wiki page commented on by wcklyaditya
- I think I erased the nand and now the beagle board isnt booting! What to do?
I think I erased the nand and now the beagle board isnt booting! What to do?
Revision r388
Edited wiki page through web user interface.
Nov 26, 2009
BeagleboardRevCValidation (Beagle Board Diagnostic Tools and Procedure) Wiki page commented on by illiyaz.baig
- I have been trying to load X-load and Uboot files available in begal board forum For "OMAP3" processor (POP package) . As a different NAND flash ( MT29C4G48MAPLCJI-6 IT x16, 4Gb )is incorporated in our board we have modified the X-load with the new NAND flash ID .
We are able to compile both the above mentioned files in our board. But the problem is, the bin file generated for X-load is not working Whereas the precompiled Bin files are working fine.
The NAND Flash used in begal board was (MT29C2G48MAKLCJI-6 IT x16, 2Gb)
Requesting you to kindly assist us Further regarding this.
I have been trying to load X-load and Uboot files available in begal board forum For "OMAP3" processor (POP package) . As a different NAND flash ( MT29C4G48MAPLCJI-6 IT x16, 4Gb )is incorporated in our board we have modified the X-load with the new NAND flash ID .
We are able to compile both the above mentioned files in our board. But the problem is, the bin file generated for X-load is not working Whereas the precompiled Bin files are working fine.
The NAND Flash used in begal board was (MT29C2G48MAKLCJI-6 IT x16, 2Gb)
Requesting you to kindly assist us Further regarding this.
