| Projects on Google Code | Results 1 - 10 of 45 |
Tiriamasis darbas magistrantūrai.
Monitor pracy sterownika komputera spalinowego
XARIAS is embedded car computer system, based on ATMega32 MCU and programmed using C language and compiled with gcc compiler. Total binary code size is only 22Kb including all fonts definition!!!
Xarias is not utilizing OBD-II interface. All data is read directly from the sensors (speed, rpm, fu...
micro HTTPD server based on modified uIP-1.0 stack, running on 8bit AVR processor and ENC28J60
Project is using parts from the following open source projects:
* [http://www.sics.se/~adam/uip uIP-1.0] minimalistic TCP/IP stack for embedded projects by Adam Dunkels
* [http://www.avrfreaks.ne...
Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments. This Google Code project is the home for the development of the Ar...
avr,
atmega,
microcontroller,
electronics,
opensourcehardware,
openhardware,
prototyping,
embedded,
arduino
=AVR Etherboot=
An ethernet bootloader for the Atmel AVR microcontroller family.
==Introduction==
This project implements a bootloader for AVR ATMega 8bit microcontrollers, that loads the firmware via ethernet and uses the TFTP protocol.
The goal is to reach a bootloader size of 2k words m...
The main goal of this project is to share all ports, apps, ideas, drivers, etc... to create a functional uIP port for all (or almost all) AVR microcontrollers.
Hope to help and receive help!
This project is based on:
* uIP tcp/ip stack from Adam Dunkels (www.dunkels.com/adam/uip)
* ENC...
=The Heh=
The Heh is a Universal Mikrocontroller Board, mainly for Robotic application and as an educational tool.
It is based on the mega128 from Atmel and its main feature is that it is easily expandable by stackable expansion boards.
The programm is transfered over a USB interface with a...
atmel,
atmega,
128,
bootloader,
mikrocontroller,
firmware,
usbasp,
usb,
obdev,
atmega128,
avr,
robot,
board,
universal,
zigbee
AVR micro-controller program designed for capturing data from analog sensors and (maybe) from some other devices (GPS, GPRS modem, etc...) and storing information to flash SD-card. Project documentation site: http://sites.google.com/site/avrblackbox/
This page is not affiliated nor endorsed by/wi...
Software for a controller board with atmega32 chip to control different devices over can-bus.